Technics SX-PR170

Synth-Parts

Hammer Felt 1 for Technics E-Piano Keyboard

1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering

€ 7 .89*

Synth-Parts

Hammer Felt 2 for Technics E-Piano Keyboard

Hammer Felt 2 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.We created a new felt that is based on a two componnent material like the original one. Here you has to replace the original felt with this new one.You will need 2 of these felts for a complete Keyboard.One-sided self-adheringInstallation note:Unfortunately, the old felt is difficult to access. It is very time-consuming to remove the old felt completely because the felt is difficult to access. Unfortunately, we have not had a good idea to simplify this. Gluing in the new felt is quite easy.

€ 10 .48*

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

Technics

Hammer for Technics E-Piano Keyboard

Hammer: Hammer black key

Hammer for a Technics E-Piano, 88 Key HammeractionThe hammers are used and in good condition. All keys supplied by us have been tested.2. different hammer versions:Please pay attention to the details. This Technics keyboard is also available with a pressure point simulation. The hammers in this keyboard version are constructed slightly differently in detail. Please take a close look.Technics has always used the same keyboard for many years. Today it has the advantage that the spare parts are easily interchangeable between the different instruments.We are of the opinion that Technics has used a very good and above all durable keyboard here. In addition to the good sound of the electric pianos, this is a definite plus point in favour of Technics electric pianosAssembly instructions:To be able to use a hammer, the keyboard must at least be unscrewed. This allows the keyboard as a whole to be pushed slightly away from the front edge. Now the key must be unscrewed. The hammer can then be removed from the top.

€ 9 .39*

Technics

Key Guide NEW for Technics E-Piano Keyboard

Replacement–set for broken key guides on Technics electric pianosWith Technics electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for Technics, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Technics key guides in an identical way. Therefore we offer you a matched spare part set for your Technics piano in our store. Why we don't have the parts rebuilt?For the reproduction of a plastic part, an individually made injection mold must be produced. Due to the rather special shape of the original key guide, the effort is very high and expensive. This would drive up the final selling price dramatically and would simply not be profitable for us. But since we have tested our product extensively, we can sell our alternative with a clear conscience. So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. You will also receive a printed manual with the product when you order it. Included in the set:– Matched tube suitable for a keyboard with 88 keys.– Special keyboard grease– Instruction manualWhen replacing the key guides, it is necessary to grease the new parts. For this reason, a suitable grease especially for electric pianos is included in the set.

€ 37 .50*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Technics

Fader knob for Technics E-Piano

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with brown line

€ 9 .52*

Technics

Holder QMRG7029A for Technics E-Pianos

1 pcs. holder QMRG7029A for Technics E-PianosThis part is made of plastic

€ 4 .76*

Technics

Holder QMRG7028for Technics E-Pianos

1 pcs. holder QMRG7028for Technics E-PianosThis part is made of plastic

€ 4 .76*

JST

JST FJ Plug 5 pin for printed circuits

JST FJ Plug 5 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Plug 10 pin for printed circuits 10PL-FJ

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 10 pin for printed circuits 10R-FJ

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 5 pin for printed circuits

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

Technics

Jack Circuit QJBG2098 for Technics, used

1 pcs. Jack Circuit QJBG2098 for Technics, usedTechnics SX-PX73Pedal Socket: Mini Din 8 PolPotentiometer for TuneThese board is tested by us and fully working. We sell it with one year warranty.

€ 46 .99*

Technics

Keys for Technics E-Piano

Parts Keyboard: Hammer black Key

Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.

Variants from €7.40*

€ 9 .90*

Technics

versenkbare Tastaturabdeckung für Technics E-Pianos Halter

Auswahl: support

versenkbare Tastaturabdeckung für Technics E-PianosTastaturabdeckungMontageschiene AluminiumStange, AluminiumHalter für StangeZahnradBei E-Pianos oder Digitalpianos von Technics ist es Standard das es eine versenkbare Tastaturabdeckung gibt. Die Tastaturabdeckung wird leicht angehoben und rollt dann sehr leicht in das innere des Pianos und gibt die Tastatur frei.Die Tastaturabdeckung ist ein Deckel der aus dem gleichen Material gefertigt ist wie der Korpus des Pianos. In der Regel ist das Spanplatte oder MDF-Platte. An der Vorderseite ist wahlweise eine Aluminiumschiene oder ein Holzsteg befestigt durch den der Deckel im geschlossenen Zustand auf dem Korpus des Pianos aufliegt. An der Rückseite ist eine durchgehende Aluminiumstange montiert. An jedem Ende dieser Stange ist ein Zahnrad aus Kunststoff befestigt. Diese Zahnräder bewegen sich auf Zahnstangen die im innern des Pianos am Korpus befestigt sind.

€ 11 .35*

Technics

Spare Parts Keyboard for Technics E-Piano, used

Parts Keyboard: Spring

Spare Parts for Technics E-Piano Keyboard, 88 Key hammeractionThis parts are usedTechnics Key-Guide:we know this problem with key guides in Technics E-Pianos. For this we have designed this alternative replacement key guide:Technics Key Guide

€ 0 .95*

Synth-Parts

Technics PR-370 OLED Display new yellow

Color: Yellow

1 pcs. brand new OLED Display forTechnics PR-170Technics PR-270Technics PR-370Especially the electric pianos built under the Technics brand are very important to us. A long time ago the support by the manufacturer was completely stopped so that today no original spare parts are available. Even if Technics has produced in very good quality, some components can break. Partly this is simply due to the aging of the components. We offer here a brand new OLED display as a replacement for the originaly used LCD display. Hints for mounting:To install this new OLED Display, the mechanical installation has to be done a different than the original display. The new OLED display will be delivered by us ready wired. No soldering work is necessary for this installation. Scope of delivery:1 pc. new OLED display, ready wiredMounting materialshort installation instruction Notes on disposal:every electronic component contains important raw materials that should be recycled. Please find out where in your city is a corresponding collection point for these components.

€ 78 .99*

Technics PR170 E-Piano without sound

Your Technics electric piano has no more sound? The power indicator (red LED) on the front left indicates that the electric piano is on. But you here no sound. In the vast majority of cases it is also so that the control LEDs and the operator panel do not work.
This misbehavior of the Technics PR170 is very well known to us. Essentially, this error is due to the aging of electronic components. We can also solve this problem and repair it. You do not need to send us the whole electric piano. No need. It's enough if you remove the motherboard from your electric piano and send it to us. We then test and repair your electric piano motherboard in our workshop. You have no idea what the motherboard is or you do not dare to screw it on the electric piano in general? Then ask a technically savvy person in your area or the electrician next door. These people can definitely help you.

Technics PR170 E-Piano with noisy keys

The keys of your Technics electric piano clatter loudly. You may hear a metallic clack when you release the keys? Your Technics PR170 piano has a built-in hammer mechanism keyboard. This means that under the key a hammer sits which is moved with each keystroke. In the resting position, this hammer rests on a felt. During the years of operation of your electric piano this felt wears out. Due to this wear of the piano felt, this hammer strikes the frame or the case of the your e-piano.
The whole thing can be solved by replacing the felt. We offer two different solutions for this case. The simple solution is. That you put an extra felt in front of the worn out felt. This solution is easy and fast. The second, more elaborate solution is to replace the old and worn out felt with a new felt. Unfortunately, it is quite expensive to completely remove the old felt. Gluing in the new felt is easy again.

Technics PR170 spare parts and replacement keys

Looking for a spare part for your Technics PR170 e-piano? We have many spare parts for Technics E-Pianos like replacemet keys, springs or key guides in stock. You are looking for other wearing parts such as felt or switchs. Even in these cases, we can help out with brand new spare parts. We offer you repaired electronics assemblies new power cables and replacement speakers for your Technics PR170 in our online shop to install yourself.

Filter products

Technics SX-PR170

Technics PR170 E-Piano without sound

Technics PR170 E-Piano with noisy keys

Technics PR170 spare parts and replacement keys