Skip to main content Skip to search Skip to main navigation

Filter products

Kawai ES6

Panasonic

Average rating of 0 out of 5 stars

tactile switch 5 mm for Kawai
1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .65*
Jalco

Average rating of 0 out of 5 stars

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch
Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .49*
Jalco

Average rating of 0 out of 5 stars

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*
Kawai

Average rating of 0 out of 5 stars

Kawai DC Power Jack 3.5 mm with solder pins
1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES4Kawai ES6Kawai ES7Kawai ES8Kawai ES520This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 7 mmInner diameter: 3.5 mmInnercontact: 1.5 mmMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 18 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 9 .22*
Kawai

Average rating of 0 out of 5 stars

Contact rubber Kawai RG88B
1 pcs. Contact rubber for Kawai KeyboardA contact rubber consists of 12 contacts and covers an octave.Contact high:  11 mmStrip bright:   25 mmStrip length:  164  mmNumber of contacts: 12A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

€ 15 .90*
Kawai

Average rating of 0 out of 5 stars

Kawai RH88 felt HAMMER LOWER-LIMIT CUSHION
1 pcs. Kawai lower hammer Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the hammers when they are returning to zero position. In the drawing it is the felt with the number 37This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.  

€ 30 .46*
Kawai

Average rating of 0 out of 5 stars

Kawai RH88 felt KEY LOWER LIMIT CUSHION
1 pcs. Kawai  Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are pushed For better mounting this felt is equipped with an adhesive tape.  

€ 14 .72*
Kawai

Average rating of 0 out of 5 stars

Kawai Power Button for Stage Serie
1 pcs. Kawai Power Button RoundKawai ES-6Kawai ES-7Kawai ES-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of diameter 11 mm. This part has one Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape. 

€ 11 .36*
Kawai

Average rating of 0 out of 5 stars

Kawai Sliptape, prepunched 100 pcs.
1 Set. Kawai Sliptape, prepunchedSet with 100 pcs.Size of a sliptape section: 4x12 mm.For old keyboards, the sliptape should be placed in the center because the sliptapes used in earlier times has been larger.This pre-cut sliptape fits only for hammer in plastic keyboards. Do not use this Sliptape in Kawai Wood Keyboards. 

€ 43 .49*
Kawai

Average rating of 0 out of 5 stars

Kawai RH88 felt KEY STOPPER CUSHION
1 pcs. Kawai  Key Stopper Felt for E-Piano KeyboardsThis felt is used by Kawai in many keyboards and dampens the keys when they are returning to zero position. In the drawing it is the two felts with the number 34This felt consists of several layers of different materials.For better mounting this felt is equipped with an adhesive tape.  

€ 30 .46*
Kawai

Average rating of 0 out of 5 stars

KAWAI RG88B Replacement keys for Keyboard
Tasten: Key C
Replacement keys for KAWAI Keyboard RG-88Bsuitable forKawai CN14Kawai ES6Kawai ES100The Kawai RG88B keyboard is a velocity sensitive keyboard with 4-zone hammer action.4-zone hammer action:With the 4-zone hammer action, Kawai is trying to get even closer to the feel of a mechanical grand piano than was possible with the previous hammer action keyboards. The keyboard touch of a mechanical piano is different in weight depending on the zone, whether bass or in the high range. This is simulated in the Kawai RG88B keyboard by the fact that there are four different hammers with different weights.The 4-zones are divided as follows:Zone 1, Bass - note 1 to 15Zone 2, middle1 - note 16 to 32Zone 3, middle2 - note 33 to 63Zone 4, soprano - note 64 to 88 

€ 16 .89*
ALPS

Average rating of 0 out of 5 stars

Volume Slider 30mm Travel
Stereo Slider with 30mm Travel. Suitable for Volume Slider forKawai ES6The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 10 .64*
Kawai

Average rating of 0 out of 5 stars

Kawai PS-154A Power Supply Unit
1 pcs external Power Supply Unit Kawai PS-154AMechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Delivery only with secondary cable.Electrical properties:Primary: 100-230V ACSecundary: 15V DCCurrent: 4AUse: EuropePractical advice:Plug of the device. Don't work under Voltage. 

€ 69 .00*
Kawai

Average rating of 0 out of 5 stars

Kawai Ring for Round Knob for Stage Serie
1 pcs. Kawai Ring for Round KnobKawai ES-7Kawai MP-8Kawai MP-11 Technical Description of Kawai Knob:This ring for Round Knob is placed on the axis of the rotary potentiometer and pressed into the housing. The ring centers the axis of the rotary potentiometer in your Kawai Stage Piano.

€ 11 .07*

Kawai ES6 spare parts easy to buy online


The Kawai ES6 stage piano is a digital piano designed for professional use by professional and amateur musicians. If an electric piano from Kawai is used a lot then the individual components of the Kawai ES6 electric piano are subject to wear. Anyone who likes to play a lot on his Kawai ES6 e-piano will need a key from the keyboard as a spare part at some point. But also the contact rubber or the sensorboard in the keyboard of the Kawai ES6 digital piano may need to be replaced by a new component. During frequent disassembly and assembly of the stage piano on stage, the phone jack, the power supply or the power cord are stressed hard. If after many years of trouble-free music making you can hear crackling and popping in the speaker, then most likely the volume control is defective. With us you can easily buy a new potentiometer for your Kawai ES6 Stage Piano.


We supply spare parts for Kawai ES6 electric piano worldwide.


We are your reliable supplier for spare parts of your Kawai ES6 electric piano. We offer our spare parts like phone jack socket, tact switch or volume potetniometer in our online store. We also have the matching potentiometer usually permanently in stock. Original Kawai spare parts like contact rubber, key and sensorboard we also have in our assortment. Spare parts we have partly also in OEM quality for the Kawai ES6 electric piano in stock. For us OEM quality means that we get spare parts such as tact switch, potentiometer or phone jack directly from the same supplier from which Kawai buys the components. Our original Kawai spare parts like sliptape, contact rubber or sensorboard are usually shipped with Deutsche Post or DHL. If the delivery of your needed spare part for the Kawai ES6 Stage Piano is especially urgent, please contact us. We can also organize an express delivery with UPS.