Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Products

tactile switch 7,3 mm
ALPS
tactile switch 7,3 mm
1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .99*
tactile switch 9,5 mm for Korg Synthesizer
ALPS
tactile switch 9,5 mm for Korg Synthesizer
1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707    all expect 0 - 9Korg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
tactile switch 9,5 mm long life Korg
Panasonic
tactile switch 9,5 mm long life Korg
1 pcs. tactile switch suitable for models KorgLong life:This switch has a lifetime 10 times longer than the original switch Korg build inBX3, CX3              new Version build 2002i30ix300                    Attention: here are also two different switch on boardMS2000, MS2000RN1, N1R, N5SG-ProX, SGR, SP500Triton le, TR61, TR88, TR-Rackz1Korg Part Number: 374000200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
tactile switch 9,5 mm Yamaha
Panasonic
tactile switch 9,5 mm Yamaha
tactile switch suitable for Yamaha ModellsRS7000                        (REC/Play/Stop/<)RM1X                           (Control Buttons without Keyboard)Motif 6, Motif 7,Motif 8   (switch without LED)Motif XS, Motif ES         (switch without LED)Yamaha Part Number: VZ085500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
tactile switch 5 mm for Roland
Panasonic
tactile switch 5 mm for Roland
1 pcs. tactile switch suitable for models RolandFP1, FP2, FP3, FP4, FP5, FP6, FP7, FP8, FP-50JV25, JV30, JV35, JV50, JV80, JV90, JV880, JV1080JP8000JD800     - Cursor ButtonsMC-303, MC-307RD-500XP10, XP50, XP60, XP80XV3080U20Fantom X6,X7,X8           without REC/PLAY/STOPOnly for non-illuminated buttons:A90, A90-EXXP30JV1000JP8080RD-600,RD-700Roland Part Number: 13169697 or 13169752The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
tactile switch 5 mm Yamaha RM1x - discontinued -
ALPS
tactile switch 5 mm Yamaha RM1x - discontinued -
1 pcs tactile switch suitableYamaha RM1XYamaha MX100II disklavierThese switch is for Keyboard ButtonsYamaha Part Number: VS1809800The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 1 .25*
Nut M7 x 0.75 mm
Synth-Parts
Nut M7 x 0.75 mm
 Nut M7 x 0.75 mm, metallic bright, for rotary potentiometerTechnical description:This nut fits to rotary potentiometer. The nut is build from iron and has metric fine thread M7 x 0.75 mm. The thickness is 2 mm and wrench size is 10 mm. 

€ 0 .46*
Alesis Andromeda Potentiometer Post Filter
Synth-Parts
Alesis Andromeda Potentiometer Post Filter
1 pcs. Replacement rotary potentiometer suitable for Alesis Andromeda A6   -  Post FilterWe have set out on a search!Alesis used potentiometers manufactured by Panasonic in the Andromeda A6. Unfortunately, Panasonic has stopped the production of this potentiometer series. In addition, there is the fact that the potentiometers from Panasonic have a few special features so that most commercially available potentiometers can not be used.After a lengthy research, which unfortunately did not lead to a positive result, we decided to build a potentiometer especially for the Alesis Andromeda A6.Shaft and guide are made of metal: We deliberately chose a potentiometer with a metal shaft and guide. We are convinced that this leads to a much longer life span than the original Panasonic potentiometers where shaft and guide are made of plastic.Electrical properties:The stereo nominal resistance has 5 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 9 mm, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 17,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in one row in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:67 pcs. - to replace all small Potentiometer in your Alesis Andromeda A6 you will need 67 of these.The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

€ 3 .75*
tactile switch 7 mm Yamaha
Panasonic
tactile switch 7 mm Yamaha
1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie    -  without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
tactile switch 5 mm for Kawai
Panasonic
tactile switch 5 mm for Kawai
1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
Xvive MN3009 256 Stage BBD DIP8
Xvive Audio
Xvive MN3009 256 Stage BBD DIP8
1 pcs. Xvive MN3009 256 Stage BBD DIP8  -   Panasonic MN3009 cloneRebuild of the MN3009 BBD from Panasonic. We think that it is a 1:1 clone from original Panasonic Chip. Comment from a college:Noise level and spectrum similar to that of an intact Panasonic MN3009. In direct comparison with a usual defective Panasonic chip (which still works, but just typically rushes) was the difference between sea surf and reasonably constant background noise clearly. That is spoken in some forums of completely noise-free, I can not understand ..... FeaturesVariable delay time from 0.64ms to 12.8msWide dynamic range 88dB (typ)Total harmonic distortion <0.3%Clock frequency from 10Hz to 200KHz Package: DIP-8    Mechanical Description:The IC is housed in a DIP 8 package and is designed for trughhole mounting on a circuit board. THis chip is pin compatible to Panasonic MN3009.ICs are sensitive to static charge! Handle with care. Semiconductors are excluded from exchange.   

€ 12 .95*
Yamaha GH3 NL2 Stopper Upper 88, felt
Yamaha
Yamaha GH3 NL2 Stopper Upper 88, felt
1 pcs. Yamaha GH3/NL2 Stopper U88 V8468201This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. Old spare part no is: VU34210R 

€ 34 .89*
tactile switch for Roland JD800 Discontinued
ALPS
tactile switch for Roland JD800 Discontinued
1 pcs tactile switch suitable for Roland JD800These switch is for User ButtonsRoland Part Number: 13169727The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 1 .96*
Yamaha GH3 Stopper Lower88
Yamaha
Yamaha GH3 Stopper Lower88
1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. 

€ 27 .49*
Roland
Replacement parts for Roland PA4 and PA4A Keyboard
Ersatzteile Tastatur: Fulcrum 12P
Spare parts for Roland PA4 and PA4AKeyboardHere you will find different parts for Progressive Hammer Action Keyboard from Roland. These PA4 Keyboard was build by Roalnd in two different Versions. There exists a PA4 and a PA4A Version. The Parts i offer here fits for both Versions. Cusion, FeltHammerKey GuidePrice is valid for one spare part. Lower Cusion for Hammer in a Roalnd PA4 or Pa4A Keyboard (PArt-No: TTROPA4-ZU-FLTHA1)This Cussion is needed to stop hammer when falling down.Roland use here a material based on two different components.One side is self-adhesive.For a complette Keyboard wit 88 Keys you will need 2 of these cusionTTROPA4-ZU-FLTHA1.For all other Felt and Cusions you will need one part for a complete Keyboard.Please have a look at the video for replacing Hammers.

Variants from €1.49*
€ 17 .90*
Clavia Nord Knob
Nord
Clavia Nord Knob
1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed. 

€ 8 .45*
Electrolytic Capacitor 1uF/50V for Audio, Radial, Nichicon FW-series - discontinued -
Nichicon
Electrolytic Capacitor 1uF/50V for Audio, Radial, Nichicon FW-series - discontinued -
1 piece Electrolytical Capacitor 1uF/50V for Audio circuits  - discontinued -Manufakturer: NichiconSeries: FWHere i offer spezial Capacitor from manufakturer Nichicon. The series FW is developt spezial for use in audio circuits.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

€ 0 .86*
Replacement Keys Yamaha GHD Keyboard
Yamaha
Replacement Keys Yamaha GHD Keyboard
Taste: Key A
Replacement Keys for Yamaha GHD KeyboardThese Keys fits for all Yamaha GHD keyboards.Note on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.Yamaha GHD keyboard is used in:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200This list of Yamaha Clavinova models is only a small selection. These keys were used in many models.Hanging Keys:In a series of these keyboards there was a problem with so-called hanging keys caused by the use of an unsuitable plastic grease.The key is clicked into the keyboard frame at the rear end. Yamaha originally used white grease here. This plastic grease has attacked the plastic of the key's. In the long run, this led to a material break at the back side of the key's (see photo 2).By this material break, the key is a bit wrong and thereby strikes the key next to it, dragging and is thus difficult (hangs). Instruments affected between May 2000 and January 2003 are affected.Today Yamaha uses a blue keyboard grease which is suitable for the plastic keys. If you still find this white grease in your keyboard, it is recommended to remove this grease and replace it with the blue one. For a keyboard should be 10 to 20 grams of grease.The Yamaha GHD keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €6.89*
€ 8 .89*
Korg tactile switch 6.2 SMD 3.1 mm ground
Synth-Parts
Korg tactile switch 6.2 SMD 3.1 mm ground
1 pcs. SMD tactile switch with higth 3.1 mm ground Attention: SMD (Surface Mounted Device) needs spezial soldering equipment and spezial experience in solderingThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton 

€ 0 .84*
Bipolar Capacitor 1uF/50V for Audio, Radial, Nichicon Muse ES
Nichicon
Bipolar Capacitor 1uF/50V for Audio, Radial, Nichicon Muse ES
1 piece bipolar Elko 1uF/50V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

€ 0 .93*
YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
Jalco
YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*
tactile switch 5 mm for Roland
ALPS
tactile switch 5 mm for Roland
tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
Clavia Nord Knob with line 6 mm
Nord
Clavia Nord Knob with line 6 mm
1 pcs. Clavia Nord Knob with line 6 mmPraktical tip:The knobs are just plugged on. No tools are needed. 

€ 8 .45*
tactile switch 4,3 mm Yamaha
ALPS
tactile switch 4,3 mm Yamaha
tactile switch suitable for modelsYamaha DX7II, DX7IID, DX7IIFDYamaha SY77, SY99Yamaha Part no: KA907030 und VF946200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

You know exactly which product you need? Then you will find our articles sorted by product type here.