Power Point

Synth-Parts

SMK LGP6531-0800F DC Power Jack with solder pins for PCB

1 pcs. SMK LGP6531-0800F DC Power Jack with solder pins for PCBtechnical Dates of LGP6531-0800F:Termination Solder PinOuter Diameter: 5.9 mmInner Diameter: 3 mmInner Contact: 1.05 mmDC-Socket LGP6531-0800F and LGP6531-1500f are nearly same. LGP6531-0800f is a little bit better with electrical contact.Mechanical Description of LGP6531-0800F and LGP6531-1500F:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 14 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .25*

Synth-Parts

DC Power Jack No2 with solder pins for PCB

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha Motif RackYamaha P-120technical Dates:Termination Solder Pinouter Diameter: 7,3 mmInner diameter: 2,9 mm Mechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 3 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 5 .95*

Synth-Parts

DC Power Jack No4 with solder pins, Roland

1 pcs. HEC2305-016250 DC Power Jack with solder Pins for PCB mounting suitable for modelsRoland EP7 IItechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 3 .45*

Synth-Parts

DC Power Jack No1 with solder pins for PCB

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKorg ESX-1 SDtechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 2 .25*

Kawai

Kawai DC Power Jack 3.5 mm with solder pins

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES4Kawai ES6Kawai ES7Kawai ES8Kawai ES520This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 7 mmInner diameter: 3.5 mmInnercontact: 1.5 mmMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 18 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 9 .22*

Kawai

Kawai DC Power Jack 1 mm with solder pins

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES100Kawai ES110Kawai ES120Kawai VPC1This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 5,9 mminner Diameter: 1 mmMechanical Description:The DC jack housing is made of plastic and the power jack is designed for direct board mounting.Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.

€ 5 .84*

KORG

DC Power Plug No03 Korg

1 pcs. DC Power Plug suitable for modelsKorg electribetechnical Dates:Termination SolderingMechanical Description:The housing of the Power Plug is made of Plastic and cable is soldered on it. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 2 .88*

Yamaha

DC Power Jack 3 mm with solder pins, Yamaha

DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha PSR-S950Yamaha P-155technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .94*

Hosiden

Hosiden HEC0470-01-630 DC Power Jack

1 pcs. HEC470-01-630 DC Power Jack with solder Pins for PCB mounting We offer the original Hosiden power socket here.technical Dates:Termination Solder PinOuter Diameter: 6.5 mmInner Diameter: 2 mmMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 3 A at 16 VDC. Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .25*

Yamaha

DC Power Jack 2 mm with solder pins, Yamaha

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha DGX-660Yamaha P-45technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 6 .38*

Synth-Parts

SMK LGP7031-1200F DC Power Jack 3.5 mm with solder pins

1 pcs. SMK LGP7031-1200F DC Power Jack 3.5 mm with solder pinstechnical Dates of LGP7031-1200F:Termination Solder PinOuter Diameter: 7 mmInner Diameter: 3,5 mmInner Contact 1.5 mmSwitch: openMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 18 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 6 .45*

Synth-Parts

DC Power Jack No5, PCB for Roland

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsRoland TB-303technical Dates:Termination Solder PinSchwitch: OpenMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for this replacement.

€ 4 .89*

Yamaha

Yamaha NU1X FU AC-IN Board without frame YG672

1 pcs. Yamaha NU1X FU AC-IN BoardFor Europe only: 230VACUsed inYamaha CLP-675Yamaha NU1X

€ 29 .49*

Yamaha

Yamaha DC Power Jack 2 mm for Yamaha

1 pcs. DC Power Jack HEC0757-01-030 for cable mounting suitable for modelstechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 7 .78*

Roland

AC Power Inlet 3 Pol

AC Power Inlet with AMP Connectortechnical Dates:Termination AMP Socket 4,3 mm Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with AMP Sockets.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

€ 5 .95*

Roland

AC Power Inlet 2 Pol

1 pcs AC Power Inlet with Solder Pins for PCBtechnical Dates:Termination Solder Pins2 polElectrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

€ 5 .95*

Synth-Parts

DC Power Jack No4 with solder pins for PCB

DC Power Jack with solder Pins for PCB mounting suitable for modelsRoland EP7 IItechnical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 2 .38*

Synth-Parts

DC Power Plug No01 soldering

DC Power Plug suitable for modelsRoland EP7 IItechnical Dates:Termination SolderingMechanical Description:The housing of the Power Plug is made of Plastic and cable is soldered on it. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 6 .78*

Synth-Parts

DC Power Jack No5, PCB for E-mu

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsE-mu Launch-Padtechnical Dates:Termination Solder PinSchwitch: OpenMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for this replacement.

€ 4 .89*

Roland

AC Power Inlet PA125 - 2 Pol for Roland

1 pcs AC Power Inlet PA125 with Solder Lug - Discontinuedtechnical Dates:Termination Solder Lug2 polThis is the typical Roland power socket used by Roland for many decades. Today, this socket is no longer available at Roland. Therefore only used power sockets are offered here. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

€ 22 .02*

Synth-Parts

DC Power Jack No5 with solder pins for PCB

1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsRoland TB-303technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .89*

Yamaha

Yamaha DC-IN PCB X9480

1 pcs. Yamaha DC-IN PCB X9480For Europe only: 12VDC

€ 28 .56*

Yamaha

Yamaha AC Power Inlet Euro 2 Pol

1 pcs AC Power Inlet EU with Solder Pins for PCBCONNECTORINLET CCT2302-1372 ELB-02Ktechnical Dates:Termination Solder Pins2 pol Electrical properties CCT2302-1372 ELB-02K:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2,5 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

€ 8 .45*

Yamaha

Yamaha DC-IN PCB YA259 Discontinued

1 pcs. Yamaha DC-IN PCB YA259 DiscontinuedThis DC-IN Circuit Board is used inYamaha P-155 For Europe only: 16VDC

€ 48 .79*

Power Point

Filter products

Power Point