Skip to main content Skip to search Skip to main navigation

Filter products

Nord

Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob
1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed. 

€ 8 .45*
Fatar

Average rating of 0 out of 5 stars

Contact rubber for Fatar Keyboards
Rubbercontact: 12 Contacts
Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!!   Not for use in Roland Instruments    !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*
€ 10 .95*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob with line 6 mm
1 pcs. Clavia Nord Knob with line 6 mmPraktical tip:The knobs are just plugged on. No tools are needed. 

€ 8 .45*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Volume Dreh Potentiometer
1 pcs. Clavia Nord Volume Dreh Potentiometer Electrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear.Appearance (technical characterisation):The casing measures 16 mm Diameter, the total length without pins is 32 mm. In this total length the casing is 9 mm long. On this casing is the thread with 7 mm length connected and out of the thread the axis rises with 15 mm length. The axis has a diameter of 4 mm and is flattened on a length of 12 mm. It is made of metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

€ 15 .90*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. tactile switch 13 mm Nord Black
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 5 .99*
Fatar

Average rating of 0 out of 5 stars

Fatar Keyboard tripple Contact rubber 13P new
Rubbercontact: 13 Contacts
1 pcs. Fatar Keyboard tripple Contact rubber 13P new  technichal dimensionsNo of contacts: 13Width: 22.7 mmheigh: 6.5 mmColor: white or grey 

€ 13 .95*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Housing Screw 16 mm Black Phillips
1 pcs. Screw 16 mm Black PhillipsLength: 16 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one is used for red side panels.

€ 1 .69*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Housing Screw 6 mm Black Phillips
1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.

€ 1 .44*
Synth-Parts

Average rating of 0 out of 5 stars

Clavia Nord OLED Display new white
1 pcs.Clavia Nord OLED Display new white this is  a plug in ready Display replacement for Claiva Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation for Nord OLED Display:Here we deliver an OLED display without mounting frame. This mounting frame must be taken from the original display. The OLED display is glued into the frame with adhesive tape. The display can be slowly removed from the frame with a constant pull. Afterwards, please transfer the adhesive tape to the new OLED display. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.  

€ 54 .99*
Synth-Parts

Average rating of 5 out of 5 stars

Clavia Nord OLED Display with Frame new white
1 pcs.Clavia Nord OLED Display with Frame new white this is  a plug in ready Display replacement for Clavia Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.This display is clipped onto the circuit board with the frame. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 74 .90*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch PCB
1 pcs Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phone jack is used by Clavia Nord Instruments often for Sustain Pedal.(This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 7 .75*
Nord

Average rating of 0 out of 5 stars

Nord Pedal Spring
1 pcs. Nord Pedal Spring  

€ 7 .95*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm Stereo for PCB
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phonejack is used by Nord often for Headphone output and also for Right / LEft Line out. (This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 8 .25*
Synth-Parts

Average rating of 0 out of 5 stars

PP Capacitor 4.7 nF Safety
 1 pcs. PP Capacitor 4.7 nF SafetySafety film capacitor suitable for use in mains filters 

€ 1 .99*
ALPS

Average rating of 0 out of 5 stars

Nord Encoder 12 mm for Nord Elektro
1 pcs. Encoder 12 mm suitable for different Nord models Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 6 .84*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. tactile switch 13 mm Nord light gray
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 6 .45*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob Encoder
1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed. 

€ 7 .95*
Nord

Average rating of 0 out of 5 stars

Nord Encoder 22 mm for Nord Stage 2 with Detent
1 pcs. Nord Encoder 22 mm for Nord Stage 2 with DetentOriginal Nord spare part. Practical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 18 .45*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm for printed circuits Mono
Phone Jack 1/4- 6.3 mm, Mono, for printed circuit used by  Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .49*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob with line 4 mm
1 pcs. Clavia Nord Knob with line  4 mmThis control knob fits on a 4 mm D-axis. Nord used these knobs on older models. Especially for the volume potentiometer.Praktical tip:The knobs are just plugged on. No tools are needed. 

€ 8 .75*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB
1 pcs. Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack with two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is often used on Clavia Nord instruments for the control pedal and rotor pedal. (This information is without guarantee - please have a look on pinlayout of the phone jack. The pin layout of phone jack is unique.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 7 .45*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Pitch Stick long cable
1 pcs. Clavia Nord Pitch Stick long cable 

€ 108 .99*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm for printed circuits Stereo
Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by  Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 8 .50*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. tactile switch 13 mm Nord Red
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 6 .78*

.Clavia Nord - Synthesizers, Stage Pianos, and Organ Simulators

Founded in 1983 by Hans Nordelius in Sweden, Clavia initially built drum computers and e-drums under the name ddrums, but since the sale of this division to the us distributor in 1989, it has focused exclusively on keyboard instruments, or more precisely, synthesizers.
The instruments captivate on the one hand by their very high quality of workmanship, but on the other hand, the unique dark red colouring also stands out.
With the synthesizers produced since 1995, e.g. the Nord Lead, Clavia brought the first virtual analogue instrument onto the market, which could be expanded to 12 voices even back then.
In the course of the years, not only the number of voices of the devices was extended, but also the sound characteristics were improved considerably.
In 1999, Clavia launched the Nord Modular, an innovation that took users' hearts by storm. A rather small metal case with a virtual-analogue modular synthesizer system.
Since these days, Clavia has also been building so-called stage pianos and organ simulators of high quality.

Spare parts for Clavia Nord devices

Even the most robust devices will have a fault at some point. Jack sockets can get a loose contact, encoders or potentiometers can scratch. Such faults can also occur with Nord synthesizers. The typical Clavia buttons with their oval surface are also subject to a certain amount of wear, which is not at all uncommon. After all, these instruments have already been around for a few years and, in the case of the stage pianos, have certainly been transported from the rehearsal room to the concert hall and back several times. It is quite possible that things got a little rough in the process.
However, this is neither a problem nor a hindrance, because we at synth-parts have the necessary spare parts in stock, and can also install them immediately if necessary.

Repair of Clavia Nord Stage Pianos, Synths and Organs

In our workshop we repair your Clavia equipment under professional conditions. Our workshop is equipped with the special tools and measuring instruments needed to repair and maintain your Nord synthesizer. Specialised professionals who learned their craft from the ground up, and understand the unique needs of musicians, will restore your older equipment to the condition it deserves.
Make an appointment for repair