Skip to main content Skip to search Skip to main navigation

Filter products

Kawai ES110

Panasonic

Average rating of 0 out of 5 stars

tactile switch 5 mm for Kawai
1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
0 .65*
Jalco

Average rating of 0 out of 5 stars

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch
Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
2 .49*
Jalco

Average rating of 0 out of 5 stars

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

6 .88*
Kawai

Average rating of 0 out of 5 stars

Contact rubber Kawai RH88A
1 pcs. Contact rubber for Kawai KeyboardFeatures:Height of contacts: 11 mmWidth of the strip: 25 mmLength of the strip: 164 mmNumber of contacts per strip: 12Note on replacing the RH88A contact rubbers:Please always replace all contact rubbers in the keyboard.A new contact rubber has better playing dynamics than a contact rubber that is 8 or 10 years old. If you replace only one contact rubber, you will notice differences in the playing dynamics.A contact rubber consists of 12 contacts and covers an octave. A rubber contact strip consists of 12 contacts and covers an octave. For complete replacement of the rubber contact strips in a 88 Key keyboard you will need 8 strips with 12 contacts. One strip can be cut after 4 contacts.

18 .90*
Synth-Parts

Average rating of 0 out of 5 stars

SMK LGP6531-0800F DC Power Jack with solder pins for PCB
1 pcs. SMK LGP6531-0800F DC Power Jack with solder pins for PCBtechnical Dates of LGP6531-0800F:Termination Solder PinOuter Diameter: 5.9 mmInner Diameter: 3 mmInner Contact: 1.05 mmDC-Socket LGP6531-0800F and LGP6531-1500f are nearly same. LGP6531-0800f is a little bit better with electrical contact.Mechanical Description of LGP6531-0800F and LGP6531-1500F:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 14 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

4 .25*
Kawai

Average rating of 0 out of 5 stars

Kawai DC Power Jack 1 mm with solder pins
1 pcs. DC Power Jack with solder Pins for PCB mounting suitable for modelsKawai ES100Kawai ES110Kawai ES120Kawai VPC1This part comes directly from Kawai Europe.technical Dates:Termination Solder PinOuter Diameter: 5,9 mminner Diameter: 1 mmMechanical Description:The DC jack housing is made of plastic and the power jack is designed for direct board mounting.Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. 

5 .84*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. Nut M12 x 1 mm black for Phone Jack 6.3mm
1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

1 .99*
Kawai

Average rating of 0 out of 5 stars

Kawai PS-129 Power Supply Unit
1 pcs external Power Supply Unit Kawai PS-129Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Delivery only with secondary cable.Electrical properties:Primary: 100-230V ACSecundary: 12V DCCurrent: 4AUse: EuropePractical advice:Plug of the device. Don't work under Voltage. 

69 .00*
Kawai

Average rating of 0 out of 5 stars

Kawai RH88B PWB Assy KKB-034(2)
1 pcs. Service Kit Kawai RJ88B PWB Assy KKB-034(2)This service kit replaces the circuit boards and contact rubbers in the Kawai RJ88B keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai ES110Kawai ES120

164 .99*

Kawai ES110 spare parts easy to buy online



The Kawai ES110 stage piano is a digital piano designed for professional use by professional and amateur musicians. If an electric piano from Kawai is used a lot then the individual components of the Kawai ES110 electric piano are subject to wear. Anyone who likes to play a lot on his Kawai ES110 e-piano will need a key from the keyboard as a spare part at some point. But also the contact rubber or the sensorboard in the keyboard of the Kawai ES110 digital piano may need to be replaced by a new component. During frequent disassembly and assembly of the stage piano on stage, the phone jack, the power supply or the power cord are stressed hard. If after many years of trouble-free music making you can hear crackling and popping in the speaker, then most likely the volume control is defective. With us you can easily buy a new potentiometer for your Kawai ES110 Stage Piano.



We supply spare parts for Kawai ES110 electric piano worldwide.



We are your reliable supplier for spare parts of your Kawai ES110 electric piano. We offer our spare parts like phone jack socket, tact switch or volume potetniometer in our online store. We also have the matching potentiometer usually permanently in stock. Original Kawai spare parts like contact rubber, key and sensorboard we also have in our assortment. Spare parts we have partly also in OEM quality for the Kawai ES110 electric piano in stock. For us OEM quality means that we get spare parts such as tact switch, potentiometer or phone jack directly from the same supplier from which Kawai buys the components. Our original Kawai spare parts like sliptape, contact rubber or sensorboard are usually shipped with Deutsche Post or DHL. If the delivery of your needed spare part for the Kawai ES110 Stage Piano is especially urgent, please contact us. We can also organize an express delivery with UPS.