Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Korg DW8000

tactile switch 7,3 mm
ALPS
tactile switch 7,3 mm
1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .93*
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
Jalco
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg          partnumber: 454004400Roland      partnumber: 13449125   HLJ0520-01-010Roland      partnumber: 13449145   YKB21-5010Yamaha     partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .56*
Hammer Felt 1 for Technics E-Piano Keyboard
Synth-Parts
Hammer Felt 1 for Technics E-Piano Keyboard
1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering

€ 7 .89*
YKB21-5076 - Phone Jack 1/4- 6.3 mm PCB Mono
Jalco
YKB21-5076 - Phone Jack 1/4- 6.3 mm PCB Mono
1 pcs. Phone Jack 1/4 inch - 6.3 mm, Mono witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5076HLJ-2305-01-3030These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .25*
CR2032 with 3 Solder pin for Korg DW-Series
Varta
CR2032 with 3 Solder pin for Korg DW-Series
1 pcs. CR2032 with 3 solder pin suitable forKorg DW6000Korg DW8000Korg ix300Korg DVP-1Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The positive pole owns two interconnected soldering legs at a distance of 10 mm. The negative pole has one solder leg.We offer these button cell from Company Renata because these producer can provide the required pin distance as the only.Manufacturer:Mitsubishi, Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 3 .28*
Korg triple female MIDI Socket for PCB, Jalco, YKF51-5046
Jalco
Korg triple female MIDI Socket for PCB, Jalco, YKF51-5046
1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*
Korg DW8000 Recapping Set
Synth-Parts
Korg DW8000 Recapping Set
Recapping Set for Korg DW8000The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg DW8000  series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.If no longer available from Nichicon, we use Würth or Rubycon Capacitors.This Recapping Set contains all necessary Capacitors for Korg DW-8000 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 46 .49*

Korg DW8000 Spare Parts and Repair Solutions

The Korg DW8000 is a classic synthesizer known for its unique hybrid digital-analog sound engine. To ensure the longevity and optimal performance of this instrument, high-quality keyboard spare parts and synthesizer spare parts are essential. Whether you're a professional musician or a vintage gear enthusiast, maintaining your DW8000 is crucial for preserving its iconic sound.

Replacement Keys and Keybed Components

One of the most common issues with vintage keyboards is wear and tear on the keys. We offer replacement keys and keybed parts specifically designed for the Korg DW8000. These components ensure smooth and reliable key action, restoring the original feel of your instrument.

Electronic Components and Sensors

Maintaining the electronic functionality of your DW8000 is vital. Our inventory includes sensor boards, contact rubbers, and other essential parts to keep your synthesizer in top condition. Replacing these components can resolve issues like unresponsive keys or inconsistent velocity sensitivity.

Control and Display Upgrades

Enhance your DW8000 with modern upgrades. We provide potentiometers, encoders, and tactile switches for precise control adjustments. Additionally, consider an OLED display upgrade or LCD display replacement to improve visibility and functionality.

PCB Repair and Specialized Services

For more complex issues, such as circuit board damage, we offer PCB repair services. Our team can also source OEM spare parts and EOL spare parts to address rare or discontinued component needs. Trust our professional repair service to restore your DW8000 to its original glory.

Preserve Your DW8000

Investing in high-quality spare parts and professional services ensures that your Korg DW8000 remains a reliable and inspiring instrument for years to come. Explore our range of solutions tailored to meet the needs of this iconic synthesizer.