Yamaha Montage 8

Panasonic

tactile switch 7 mm Yamaha

1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie - without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Yamaha

Yamaha GH3 NL2 Stopper Lower 88

1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards.

€ 27 .49*

Yamaha

Replacement Keys Yamaha GHD Keyboard

Key: Key A

Replacement Keys for Yamaha GHD KeyboardThese Keys fits for all Yamaha GHD keyboards.Note on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.Yamaha GHD keyboard is used in:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200This list of Yamaha Clavinova models is only a small selection. These keys were used in many models.Hanging Keys:In a series of these keyboards there was a problem with so-called hanging keys caused by the use of an unsuitable plastic grease.The key is clicked into the keyboard frame at the rear end. Yamaha originally used white grease here. This plastic grease has attacked the plastic of the key's. In the long run, this led to a material break at the back side of the key's (see photo 2).By this material break, the key is a bit wrong and thereby strikes the key next to it, dragging and is thus difficult (hangs). Instruments affected between May 2000 and January 2003 are affected.Today Yamaha uses a blue keyboard grease which is suitable for the plastic keys. If you still find this white grease in your keyboard, it is recommended to remove this grease and replace it with the blue one. For a keyboard should be 10 to 20 grams of grease.The Yamaha GHD keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €6.89*

€ 8 .89*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Yamaha

Yamaha GH3 Actuate Rubber

1 pcs. Yamaha GH3 Actuate RubberThis rubber fits in these keyboardsYamaha GHDYamaha GH3Yamaha NL2This rubber is used on every single key as stopperColor: black

€ 2 .08*

Yamaha

Yamaha Montage Super Knob Rotary Potentiometer

1 pcs. Yamaha Montage Super Knob Rotary PotentiometerYamaha Montage 6Yamaha Montage 7Yamaha Montage 8Electrical properties:The stereo nominal resistance has 5 Kilo-Ohm, the electric resistance gradient is liniear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in one row in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 9 .84*

Yamaha

Contactrubber for Yamaha GHD Keyboard

Rubbercontact: 11 Contacts

1 pcs. new Contactrubber for Yamaha GHD KeyboardThis keyboard is used in these modells and others:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha CVP-207Yamaha CVP-209Yamaha CVP-401Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200Color of these Contactrubber may be different.

Variants from €9.52*

€ 13 .24*

ALPS

Yamaha Motif Volume Potentiometer

1 pcs. Slider with 45mm Travel. Suitable for Yamaha Motif ESYamaha Montage 6 Main VolumeYamaha Montage 7 Main VolumeYamaha Montage 8 Main VolumeThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 9 .90*

Yamaha

Yamaha Tyros Encoder 16 mm footprint

1 pcs. Encoder 16 mm widht suitable forYamaha Tyros 1Yamaha Tyros 2Yamaha CVP-207Yamaha CVP-209 Part numbers:Yamaha VU48130R REB161-PVB

€ 8 .45*

Yamaha

Yamaha GH3 AFT Stopper Upper 88, felt

1 pcs. Yamaha GH3 Stopper U88 with AftertouchThis GH3 keyboard is used in these modells and others:Yamaha Montage 8This felt is special for GH3 Keyboards with Aftertouch

€ 48 .99*

Yamaha Montage 8: A Comprehensive Overview

The Yamaha Montage 8 synthesizer is a highly regarded instrument among professional musicians and producers, known for its exceptional sound quality and advanced features. As a flagship model, it offers a versatile platform for both live performances and studio productions. This article delves into its compatibility, typical use cases, and the relevance of repair solutions for maintaining its functionality.

Compatibility and Features

The Yamaha Montage 8 is compatible with a wide range of music production setups, making it an excellent choice for professionals. Its Motion Control Synthesis Engine combines AWM2 (Advanced Wave Memory 2) and FM-X (Frequency Modulation) synthesis technologies, allowing for a broad spectrum of sound design possibilities. This synthesizer is equipped with an 88-key balanced hammer action keybed, ensuring a realistic piano feel, suitable for hybrid piano performances.

Typical Use Cases

Designed for versatility, the Yamaha Montage 8 excels in various applications. It is ideal for stage performances, where its robust build and intuitive interface allow musicians to deliver expressive performances. In studio environments, its extensive sound library and customizable features make it a powerful tool for composing and recording. Its integration capabilities with DAWs and other MIDI devices further enhance its utility.

Repair and Maintenance Relevance

Given its advanced technology and frequent use, maintaining the Yamaha Montage 8 is crucial for ensuring its longevity and performance. Over time, components such as replacement keys, keybed parts, and contact rubbers may require attention. Other parts like hammer action parts, potentiometers, encoders, and tactile switches are also subject to wear and tear. The LCD display, a critical interface component, might need replacement to maintain usability.

For those dealing with internal issues, PCB repair and sourcing OEM spare parts or EOL spare parts can be essential. Partnering with a professional repair service ensures that these tasks are handled with expertise, preserving the instrument's integrity and functionality.

Conclusion

The Yamaha Montage 8 stands out as a sophisticated and reliable synthesizer for professionals. Understanding its compatibility, applications, and the importance of regular maintenance can help users maximize its potential. Access to quality keyboard spare parts, e-piano spare parts, stage piano spare parts, and synthesizer spare parts is crucial for addressing any repair needs, ensuring this remarkable instrument continues to perform at its best.

Filter products

Yamaha Montage 8

Yamaha Montage 8: A Comprehensive Overview

Compatibility and Features

Typical Use Cases

Repair and Maintenance Relevance

Conclusion