Skip to main content Skip to search Skip to main navigation

Filter products

Korg 01/W - 05/W Serie

ALPS

Average rating of 0 out of 5 stars

tactile switch 9,5 mm for Korg Synthesizer
1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707    all expect 0 - 9Korg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .64*
Jalco

Average rating of 0 out of 5 stars

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .49*
Jalco

Average rating of 0 out of 5 stars

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg          partnumber: 454004400Roland      partnumber: 13449125   HLJ0520-01-010Roland      partnumber: 13449145   YKB21-5010Yamaha     partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .56*
E-Switch

Average rating of 0 out of 5 stars

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*
Synth-Parts

Average rating of 0 out of 5 stars

Cap rectangular for power switch
1 pcs. Cap rectangular for power switchPlease note the dimensions. The original caps used to be larger on many instruments. Dimensions: 12 x 7 mmHight: 10 mm

€ 2 .34*
Yamaha

Average rating of 0 out of 5 stars

Replacement keys and parts for FS Keyboard
Key: Aftertouch 76
1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition  

Variants from €0.67*
€ 88 .99*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display black with cable Kit for Korg 01/W
1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forKorg 01/W,Korg 01/W FDKorg 01/W ProKorg 01/W ProXDisplay for Korg 01/RW Rack Modul please order hereWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/W Keyboard Version:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display blue with cable Kit for Korg 01/W
1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProXDisplay for Korg 01/RW rack version please ordere hereWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsone SMD ResistorInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/W Keyboard Version:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people.This Display is also available with this Colors:Black Character / White BackgroundWhite Character / Black Background 

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

Korg 01/W Recapping Set
Recapping set Korg 01/WKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProXThe wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg 01/W series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Korg 01/W.The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 29 .49*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display white with cable Kit for Korg 01/W
LCD Display with LED Backlight replacement including cable Kit forKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProX We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementPlease let us know your instrumnet. The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Dislpay in Korg 01/W:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people. 

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

5 pcs. Contact Cleaning Stripes for electrical contacts
5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.

€ 11 .90*
Synth-Parts

Average rating of 0 out of 5 stars

Korg 01R/W new LCD Display black with cable Kit
1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forKorg 01R/W Rack ModulDisplay for Korg 01/W Keyboard Version plese order hereWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope for LCD Display:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/RW:The instrument must be disassembled almost completely to reach the display.The rack version of the Korg 01/RW synthesizer has much less mechanical effort than the keyboard versions.For the new display to work, one SMD resistor on the mainboard of the Korg 01/RW must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/RW have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Varta

Average rating of 0 out of 5 stars

CR2032
1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 3 pol C13-plug, 3m
1 pcs. Power cabel 3m with 3P C13 plug   

€ 9 .64*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display yellow with cable Kit for Korg 01/W
1 pcs. Yellow LCD Display with LED Backlight replacement including cable Kit forKorg 01/WKorg 01/W FDKorg 01/W ProKorg 01/W ProX We offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  Yellow BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementPlease let us know your instrument.The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01/W:The instrument must be disassembled almost completely to reach the display.For the new display to work, one SMD resistor on the mainboard of the Korg 01/W must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/W have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people 

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

Replacement stereo rotary potentiometer for Korg
Replacement stereo rotary potentiometer suitable for volume control inKorg 05RWKorg TR RackKorg X5DRThis volume control is no longer available by Korg. The here shown replacement pot is build with a 2,5 mm longer axis.Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The six solder pins are 0,6 mm wide (one of them) and they are arranged in two rows in a distance of 2,5 mm (pitch). At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From
€ 6 .55*
Synth-Parts

Average rating of 0 out of 5 stars

stereo potentiometer for Korg
1 pcs. Replacement stereo rotary potentiometer suitable for volume control inKorg 01R/WElectrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 9,5 mm, the total length without pins is 24 mm. In this total length the casing is 7 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 15 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The six solder pins are 0,6 mm wide (one of them) and they are arranged in two rows in a distance of 2,5 mm (pitch). Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

From
€ 6 .55*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 3 pol C13 Socket, 1.8 m
1 pcs. Power cabel with 3Pol C13-plug VDE testedCable: H05VV-G3G0,75mm²Length: 1,8 m

€ 6 .45*
Jalco

Average rating of 0 out of 5 stars

Korg triple female MIDI Socket for PCB, Jalco, YKF51-5046
1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display white with cable Kit for Korg 01R/W
LCD Display with LED Backlight replacement including cable Kit forKorg 01R/WWe offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsOne SMD ResistorInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg 01R/W:The instrument must be disassembled almost completely to reach the display.The rack version of the Korg 01/RW synthesizer has much less mechanical effort than the keyboard versions.For the new display to work, one SMD resistor on the mainboard of the Korg 01/RW must be replaced.Furthermore we recommend to take out of function the power supply for the old backlight. For this two components in the Korg 01/RW have to be cut or desoldered. With this change the annoying beeping is eliminated.This work is to be done only by technically, best electrotechnically savvy people. 

€ 99 .00*
ALPS

Average rating of 0 out of 5 stars

Korg 01/W Volume Slide Potentiometer
1 pcs. Korg 01/W Volume Slide PotentiometerKorg 01WKorg 01/W FDKorg 01W ProKorg 01/W ProXOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*
KORG

Average rating of 0 out of 5 stars

Korg Pitch Bend Potentiometer - discontinued
1 pcs. Korg Pitch Bend PotentiometerThis is a replacement Poterntiomter for Korg Pitch Bender. This Potetniomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):THis Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

€ 6 .79*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 3 pol C13-plug, 2m
Power cabel 2m with 3P C13 plug   

€ 7 .58*
Roland

Average rating of 0 out of 5 stars

AC Power Inlet 3 Pol
AC Power Inlet with AMP Connectortechnical Dates:Termination AMP Socket 4,3 mm  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with AMP Sockets.The electrical load is 10 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.

€ 5 .95*

Korg 01/W Workstation Synthesizer

Korg also introduced a new term to the world of musicians with the launch of the 01/W series. The term workstation has been established. The Korg 01/W Seire includes various models. Starting with the classic 01/W with 61 keys. Based on this, there are the 01 / W Pro with 76 keys and the large version, the 01/W Pro X with 88 keys. The series also includes a rack synthesizer version, the Korg 01R/W. To be able to offer a synthesizer version with floppy disk drive, there is also the Korg 01/W FD.

The Korg 01/W series today

The Korg 01/W is a digital synthesizer with AI2 synthesis. The tone generation is 16/32. The synthesizer was introduced to the market in 1991. The Korg 01 / W series still has a wide market breadth today and there is a wide range of additional sounds available. There are various Usergroups in which a lively exchange takes place. As a plus for the 01/W are often called the good keyboard and that the synthesizer is a good master keyboard. Furthermore, everything is housed in a very sturdy metal housing which brings high stability and longevity.

Spare parts and repairs

We offer spare parts in our online shop for this workstation synthesizer series. At Korg, no spare parts have been available for a long time. In order to make our offer attractive, we use different sources for our spare parts offer. So far you can find in our shop OEM spare parts. When it comes to spare parts for the keyboard or the housing, we make use of used spare parts which are in good condition. As a special highlight we can offer brand new LCD displays with LED backlight. The original displays are today often difficult to read. Another advantage is the whistling that occurs with many synthesizers disappears. All work that is due on Korg 01/W, whether the replacement of potentiometer, tactile switchs or encoders or the installation of a replacement LCD display, we perform all repair and replacement work professionally for you.