Kawai MP8II

Panasonic

tactile switch 5 mm for Kawai

1 pcs tactile switch suitable for modelsKawai ES6Kawai K4Kawai K5000Kawai KSP10, KSP20, KSP30Spare Part Number: 808345The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Kawai

Kawai Sliptape, stripe for Wood Keys

Kawai Sliptape, stripeThis Sliptape is for old and new wood Keys.8 contiguous strips are delivered which are cut to size. This amount is enough for more than one keyboard. So you can also cut something.You will find here a Blog articel for this Item:Sticky key on Kawai E-Piano Practical Hint for Kawai Sliptape:When replacing the sliptapes on the wooden keys, you have to be extremely accurate and meticulous. Especially the removal of glue residues on the hammer heads is extremely important.

€ 43 .49*

Synth-Parts

Piano felt for Kawai Sliptape replacement

1 pcs. Piano felt as alternative to Kawai sliptapeOur alternative for the sliptape used by Kawai for wooden keys.Our alternative to the slip tape used by Kawai for wooden keys.Piano felt, an old and proven product from piano making. This piano felt is used by every piano maker exactly where mechanical resilience is required. Where a lever movement is converted into a rotary movement and mechanical parts should slide over each other as silently as possible.In the Kawai digital pianos in which wooden keys are used is exactly such a mechanical load given from Kawai with a so-called Sliptape is padded. This piano felt here is best suited to replace the Kawai sliptape.Compared to the original Kawai Sliptape, the key pressure on this felt is very slightly more sluggish. However, this should improve with use as the felt becomes smoother with use.What else you need:1 cutter knifePonal expressAlcohol for cleaningPolishing pasteThe felt strip supplied is more than sufficient for one keyboard with 88 keys.

€ 36 .00*

Jalco

YKB21-5074 - Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4 inch- 6.3 mm, stereo with switch, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5074SCJ630P5PJ603Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Kawai

1 pcs. Kawai Holder Score Stand

1 pcs. Kawai Holder Score StandThis housing is made of plastic1 pc. The price is for one holder.This score stand is used onKawai ES7Kawai ES8Kawai MP7Kawai MP10Kawai MP11Kawai VPC1

€ 9 .59*

Synth-Parts

1 pcs. Nut M12 x 1 mm black for Phone Jack 6.3mm

1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

€ 1 .99*

Kawai

Kawai Volume Slider Knob for MP Stage Serie

1 pcs. Kawai Volume Slider KnobKawai MP-8Kawai MP-11 Technical Description of Kawai Button:This Volume Slider knob will be put on slide potentiometer on your Kawai Stage Pianos

€ 11 .07*

Kawai

Kawai Round Knob for Stage Serie

1 pcs. Kawai Round KnobKawai MP-8Kawai MP-7Kawai MP7SEKawai MP-11Technical Description of Kawai Knob:This Round knob will be put on rotary potentiometer on your Kawai Stage Pianos

€ 11 .07*

ALPS

Kawai Volume Slider 30mm Travel

1 pcs. Kawai Volume Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

Kawai

Kawai Button for MP series Stage Piano Large

1 pcs. Kawai Button Duo large 14 x 8 mmKawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 14 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .07*

Kawai

Kawai Button for Stage Serie Small

1 pcs. Kawai Button Duo Small 11 x 8 mmKawai ES-7Kawai MP-8Kawai MP-11Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description of Kawai Button:This Button fits for many Kawai Stage Pianos and is build for a Casing Window of 11 x 8 mm. This part has two Button. It is used with 5 mm tact switch.Practical tip:This button sits between PCB and Cassis. Normaly the button is fixed with tape.

€ 11 .07*

Kawai

Kawai WK88 PWB Assy KKB-008

1 pcs. Service Kit Kawai WK88 PWB Assy KKB-008This service kit replaces the circuit boards and contact rubbers in the Kawai WK88 keyboard. Only possible as a replacement for keyboards in which contact rubbers with three contacts per tone were used.This set of boards replaces the board KKB-008.The set consists of two boards, fully equipped with new contact rubbers.These Board fit in these e-pianos:Kawai CA13Kawai CA63Kawai PW9Kawai PW1000

€ 199 .00*

Kawai

Kawai Potentiometer for Pitch Bend VQ764300

1 pcs. Kawai Rotary Potentiometer for pitch bendThis poti is used in

€ 13 .90*

Kawai

Kawai Potentiometer for Modulation

1 pcs. Kawai Rotary Potentiometer for Modulation

€ 13 .78*

ALPS

Kawai Value Slider 30mm Travel

1 pcs. Kawai Value Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

Synth-Parts

Kawai Rotary Poti vertikal Real Time Control

1 pcs. Kawai Rotary Poti vertikal Real Time Control Electrical properties:The nominal resistance is 10 kOhm. The original potentiometer from Kawai has a resistance value of 20 kOhm. Since this potentiometer is used as a voltage divider, the resistance value is not decisive.Appearance (technical characterisation):The casing measures 11 x 11 mm, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin. Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .95*

Comprehensive Solutions for the Kawai MP8II

The Kawai MP8II is a highly regarded stage piano, known for its exceptional sound quality and realistic touch. To maintain its performance, it's essential to have access to reliable e-piano spare parts and professional repair services.

Essential Spare Parts for Your Kawai MP8II

Over time, certain components of the Kawai MP8II may require replacement. Commonly needed stage piano spare parts include replacement keys, keybed parts, and contact rubber. These elements ensure the instrument's playability and tactile response.

Enhancing and Maintaining the Hammer Action

The MP8II's authentic hammer action parts contribute significantly to its realistic feel. Maintaining these components is crucial for a consistent playing experience. Should issues arise, replacing worn-out parts with OEM spare parts is recommended to preserve the instrument's integrity.

Upgrading and Repairing Electronic Components

Modernizing your MP8II can be achieved through upgrades such as an OLED display upgrade, replacing the original LCD display replacement. For internal repairs, components like the PCB repair, tactile switch, and potentiometer may be addressed to restore full functionality.

Maintaining the Instrument's Structural Integrity

Elements such as felt and Sliptape play a role in the MP8II's sound and mechanical performance. Replacing these parts as needed ensures the piano continues to perform at its best.

Accessing Professional Repair Services

For complex repairs or sourcing EOL spare parts, utilizing a professional repair service is advisable. Experts can provide the necessary skills and resources to restore your Kawai MP8II to optimal condition.

Maintaining your Kawai MP8II with quality spare parts and professional services ensures it remains a reliable and enjoyable instrument for years to come.

Filter products

Kawai MP8II

Comprehensive Solutions for the Kawai MP8II

Essential Spare Parts for Your Kawai MP8II

Enhancing and Maintaining the Hammer Action

Upgrading and Repairing Electronic Components

Maintaining the Instrument's Structural Integrity

Accessing Professional Repair Services