Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Roland D-110

tactile switch 5 mm for Roland
ALPS
tactile switch 5 mm for Roland
tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
Jalco
YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg          partnumber: 454004400Roland      partnumber: 13449125   HLJ0520-01-010Roland      partnumber: 13449145   YKB21-5010Yamaha     partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*
Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch
Synth-Parts
Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch
1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125  Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 2 .44*
Roland D-110 OLED Display NEW
Synth-Parts
Roland D-110 OLED Display NEW
Color: White
1 pcs. Roland D-110 OLED Display NewReady to plug in OLED display for replacement in Roland D-110 . No soldering is required.Roland has built a display into the D-110  that is no longer available today. Above all, a mechanical adaptation to today's available OLED display is required.We have developed a mounting frame that allows the use of today's standard display. We have this frame specially manufactured.For the actual assembly of the new OLED display in the Roland D110 only a screwdriver is required.Scope of delivery of the OLED Display Set:OLED Display ready wiredMounting FrameInstructionsPlease choose you favorit color. Lifetime of OLED Display:The lifetime is specified by the manufacturer with 40,000 to 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 88 .99*
stereo potentiometer for Roland
Synth-Parts
stereo potentiometer for Roland
1 pcs. Replacement stereo rotary potentiometer suitable for volume control inRoland D-110Electrical properties:The stereo nominal resistance has 50 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 9,5 mm, the total length without pins is 24 mm. In this total length the casing is 7 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 15 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The six solder pins are 0,6 mm wide (one of them) and they are arranged in two rows in a distance of 2,5 mm (pitch). Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

€ 7 .34*

Simply order spare parts for Roland D-110 online



Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. In our shop we offer you Roalnd D-110 spare parts products, which continue the brand quality after the replacement in the usual way. These include synthesizer replacement parts and key replacement parts, but also D-110 encoders, PCB mount phone jacks or LCD display for Roland D-110. One thing all Roland spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the D-110 replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which Roland D-110 probe to buy or what type of Replacement Parts or replacement key are right for the models you use. We are happy to help!


Do not compromise on quality



A system is only as powerful as its smallest component. For you, this means that Roland brand-quality replacement parts that you know from the manufacturer should also be purchased and installed. This applies to Roland D-110 encoders as well as the Roland D-110 LCD display or any other D-110 replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an Roland D-110 encoder or an Roland D-110 tact switch, you have the same professional quality as buying a complete device. For all questions we are gladly there for you. Phone jack socket for PCB? Replacement keys? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.