Skip to main content Skip to search Skip to main navigation

Filter products

Yamaha S90

Panasonic

Average rating of 0 out of 5 stars

tactile switch 9,5 mm Yamaha
tactile switch suitable for Yamaha ModellsRS7000                        (REC/Play/Stop/<)RM1X                           (Control Buttons without Keyboard)Motif 6, Motif 7,Motif 8   (switch without LED)Motif XS, Motif ES         (switch without LED)Yamaha Part Number: VZ085500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .65*
Yamaha

Average rating of 0 out of 5 stars

Yamaha GH3 NL2 Stopper Lower 88
1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. 

€ 27 .49*
Yamaha

Average rating of 0 out of 5 stars

Replacement Keys Yamaha GHD Keyboard
Key: Key A
Replacement Keys for Yamaha GHD KeyboardThese Keys fits for all Yamaha GHD keyboards.Note on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.Yamaha GHD keyboard is used in:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200This list of Yamaha Clavinova models is only a small selection. These keys were used in many models.Hanging Keys:In a series of these keyboards there was a problem with so-called hanging keys caused by the use of an unsuitable plastic grease.The key is clicked into the keyboard frame at the rear end. Yamaha originally used white grease here. This plastic grease has attacked the plastic of the key's. In the long run, this led to a material break at the back side of the key's (see photo 2).By this material break, the key is a bit wrong and thereby strikes the key next to it, dragging and is thus difficult (hangs). Instruments affected between May 2000 and January 2003 are affected.Today Yamaha uses a blue keyboard grease which is suitable for the plastic keys. If you still find this white grease in your keyboard, it is recommended to remove this grease and replace it with the blue one. For a keyboard should be 10 to 20 grams of grease.The Yamaha GHD keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €6.89*
€ 8 .89*
Yamaha

Average rating of 0 out of 5 stars

Yamaha Keyboard grease, blue 50g
Yamaha Spezial Keyboard grease, Blue 50gOriginal Yamaha plastic grease for Keyboards. Color is blue and will be delivered in a 50 gramm portion.Molycote G-1066YThis grease is used on YamahaOn GHD and GH3 keyboards on the fulcrum - Where the key engages the frame.For pedals at the mechanical moving parts. 

€ 35 .50*
Yamaha

Average rating of 0 out of 5 stars

Contactrubber for Yamaha GHD Keyboard
Rubbercontact: 11 Contacts
1 pcs. new Contactrubber for Yamaha GHD KeyboardThis keyboard is used in these modells and others:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha CVP-207Yamaha CVP-209Yamaha CVP-401Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200Color of these Contactrubber may be different.

Variants from €9.52*
€ 13 .24*
Yamaha

Average rating of 0 out of 5 stars

Yamaha GHD one octae white keys
One Octave white Replacement Keys for Yamaha GHD KeyboardThis set contains:1 x A1 x B1 x C1 x D1 x E1 x F1 x GNote on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key. 

€ 58 .49*
Yamaha

Average rating of 0 out of 5 stars

Yamaha GH3 AFT Stopper Upper 88, felt
1 pcs. Yamaha GH3 Stopper U88 with AftertouchThis GH3 keyboard is used in these modells and others:Yamaha Montage 8This felt is special for GH3 Keyboards with Aftertouch 

€ 48 .99*
Synth-Parts

Average rating of 0 out of 5 stars

Yamaha S90 new LCD Display black plug and play
1 pcs. Black LCD Display with LED Backlight replacementYamaha S90We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for Yamaha S90:Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha S90:To replace the display in the Yamaha S90, remove the screws on the bottom edge. The S90 has a folding mechanism so that the upper part of the housing can be folded upwards. The display is then already accessible. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed.Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife.Mechanically, a piece of a small metal bracket must be sawn off. However, as this metal bracket can be easily removed from the appliance, this is a simple mechanical job.Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.   

€ 129 .00*
Synth-Parts

Average rating of 0 out of 5 stars

Yamaha Tyros Encoder 12 mm footprint
1 pcs. Encoder 16 mm widht suitable forYamaha S90    

€ 8 .45*
Synth-Parts

Average rating of 0 out of 5 stars

DRAM K4S643232E-TC70000 replacement equivalent
1 pcs. DRAM K4S643232E-TC70000 Mechanical Description:This flash rom is housed in a TSOP86 package and is designed for SMD mounting on a circuit board. This part sensitive to static charge  

€ 24 .89*