Roland JD-Serie

Panasonic

tactile switch 5 mm for Roland

1 pcs. tactile switch suitable for models RolandFP1, FP2, FP3, FP4, FP5, FP6, FP7, FP8, FP-50JV25, JV30, JV35, JV50, JV80, JV90, JV880, JV1080JP8000JD800 - Cursor ButtonsMC-303, MC-307RD-500XP10, XP50, XP60, XP80XV3080U20Fantom X6,X7,X8 without REC/PLAY/STOPOnly for non-illuminated buttons:A90, A90-EXXP30JV1000JP8080RD-600,RD-700Roland Part Number: 13169697 or 13169752The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

ALPS

tactile switch for Roland JD800 Discontinued

1 pcs tactile switch suitable for Roland JD800These switch is for User ButtonsRoland Part Number: 13169727The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 1 .73*

Roland

Replacement keys and spare parts for Roland SK7 Keyboard

Auswahl Ersatzteil: 12 Contacts

Spare parts for Roland SK7 KeyboardThis part fits for all Roland SK7 KeyboardsRoland SK7 Keyboard is used inD-70JD-800U-20 This keyboard is no longer available from Roland. Production discontinued.

Variants from €0.68*

€ 15 .90*

Synth-Parts

Roland PG300, PG800, JD-800 Potentiometer, Slider

1 pcs. slide potentiometer with 30mm travel and 15mm Lever. Suitable forRoland D-70 - C1, BrightnessRoland JD-800 - Lever shorten!!!Roland PG-300Roland PG-800This Fader with the labelling EWANFX15B15 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Attention:Special pin layout. This potentiometer has a special pin layout and can only be used as a replacement for EWANFE or EWANFJ potenziometers. Not suitable for EWANA potentiometers.Without center. This potentiometer is only available without center.Electrical properties:The nominal resistance has 100 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of black plastic and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The potetniometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 8 .45*

Synth-Parts

FFC socket 26 pin, 1.25 mm pitch right angel

1 pcs. 26 pin FFC socket with 1.25 mm pitch right angel26 pintop contact sidePitch: 1.25 mmThis FFC Socket is used in Roland JD-800. This is located on small PCB under Keyboard

€ 0 .94*

Varta

CR2032

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Jalco

Roland triple female MIDI Socket for PCB, Jalco, YKF51-5046

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. This is a 1:1 replacement for the MIDI jack in newer Roland instruments.used by:Roland These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*

Synth-Parts

Roland JD-800 Volume Potentiometer

1 pcs. slide potentiometer with 30mm travel and 15mm Lever. Suitable forRoland JD-800 VolumeRoland XV-88 VolumeThe plastic lever must be shortened. The original potentiometer has a 5 mm sliding pin.This volume control with the labelling EWANA0X5B14 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 k? (Kilo-Ohm), the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of black plastic and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 8 .33*

Synth-Parts

Roland JD-800 FFC Kabel 26 Pol 430 mm Type B

1 pcs. Roland JD800 FFC cable 26 pinKeyboard connection cablein Roland JD-800 Service Manual this cable is called FUJI CARD 26x420This cable is the connection cable between the Mainboard in Rolands JD800 and the Contact Board Assy under the Keyboard.There are 2 different keyboard cables in the Roland JD-800:According to our research, there exists two different keyboard versions in Roland JD-800, which means there are two different versions used of this cable. The difference in this cable is, in one type of this cable contacts are on the same side of cable. In second type of this cable contacts are on one side on top and and on the opposite side at the other end of the cable contacts are down under.Please take a close look at your Roland JD-800 before ordering this cable. We have both cable versions on offer.This cable was produced in Germany in best qualtity.Length = 420 mmOpposit side connector

€ 16 .24*

NKK Switches

Single pole rocker switch 250V/6A with solder lugs

Single pole rocker switch with solder lugs suitable for modelsRoland6A / 250VACTermination Solder Lug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested Mechanical Description:The switch housing consists of polycarbonate. The switch is provided for a snap-in mounting in a housing and having corresponding spring lips on the narrow side of the housing. Housing cutout for installation should be 19.30 mm x 12.90 mm. The switch itself has a width of 12.90 mm, a length of 18.50 mm and a height of 13.60 mm plus 3 mm height of the rocker. The outside dimensions are 20.8 mm x 14.8 mm.Electrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made with solder lugs for cable assembly. The length of the terminals is 2.9 mm with a width of 3 mm.The electrical load is 6 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 4 .76*

Synth-Parts

FFC Cable 26 Pol 1,25 420 mm

1 pcs. FFC cable 26 pin 1.25 pitch 420 mm Length = 420 mmsame side contacts.

€ 8 .58*

Varta

CR2016 for PCM Card

1 pcs. CR2016 forKorg M1 PCM CardRoland JD-800 PCM CardAttention: Shipping for Europe only Technical Description:The dimensions of CR2016 are diameter of 20 mm and a thickness of 1,6 mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Roland

Roland Fantom XR Power Switch Knob

1 pcs. Knob for power switch inRoland Fantom XRSpecifications:Dimension: 18x18 mmHight: 10 mmTechnical description:Praktical tip:The knobs are just plugged on. No tools are needed.Price is for one Knob without switch

€ 6 .55*

ALPS

Power Switch, 250V/4A, PCB

1 pcs. Single-pole Power Switch in the switch design - OFF with solder pins for PCB mounting suitable for modelsKorg Korg Part Number:Termination Solder pinMounting PCBVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for PCB mounting. Therefor are tow solder pins as Snap-In pins in the front. The spacing of the snap in pins is 16 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 4 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Synth-Parts

Roland JD-800 LCD Display new amber

1 pcs. LCD Display brandnew in amber forRoland JD-800this is a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 74 .97*

Synth-Parts

Roland JD-800 OLED Display new white

1 pcs. OLED Display brandnew in white forRoland JD-800this is a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 113 .99*

Synth-Parts

Roland JD-800 OLED Display new blue

1 pcs. OLED Display brandnew in blue forRoland JD-800this is a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 113 .99*

Synth-Parts

Roland JD-800 OLED Display new yellow

1 pcs. OLED Display brandnew in yellow forRoland JD-800this is a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 113 .99*

Synth-Parts

Roland JD800 Encoder Board new

1 pcs. Roland JD800 Encoder Board newThis Encoder PCB is suitable forRoland JD800Mechanical Description of Encoder Board:we deliver a brand new Encoder and a PCB ready mounted, herer you can just plug in the original cable. The cable is just pluged in and has to be taken over from original Encoder Board.This new Encoder has housing from Metall and a plastik axis.Practical advice for Mounting JD800 Encoder PCB:The circuit board must be machined:The new encoder has a larger thread than the original encoder in the JD-800. Furthermore, there is a pin on the encoder to prevent mechanical rotation of the component. The mounting hole for this pin must be re-drilled. The exact drilling plan can be seen in the pictures.The enlargement from 7 mm to 9 mm can be done by hand with a standard metal drill. This is gentler than working with a machine.

€ 14 .45*

Panasonic

Roland JD-800 Potentiometer with center

1 pcs. slide potentiometer with 30mm travel and 5mm Lever. Suitable for Roland JD-800 Attention:Special pin layout. This potentiometer has a special pin layout and can only be used as a replacement for EWANFE or EWANFJ potenziometers. Not suitable for EWANA potentiometers.Without center. This potentiometer is only available without center.Electrical properties:The nominal resistance has 100 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of black plastic and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The potetniometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 17 .49*

Hosiden

Roland Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Roland Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Please have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .25*

Synth-Parts

Roland JD-800 FFC Kabel 26 Pol 430 mm Type A

€ 16 .24*

Filter products

Roland JD-Serie