Kawai K5

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

1 pcs, Nut M12 x 1 mm black for Phone Jack 1/4\ |Nut M12x1 for Phone Jack ¼ Technical description:The M12x1 nut offered is an accessory for 6.35 mm jack sockets. The nuts are made of iron. Metric fine thread M12 with 1 mm pitch. The nut has a thickness of 2 mm. The spanner size is 14 mm.Very good quality.

1 pcs blue LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5m We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. tactile switch suitable for modelsKawai K5Kawai K5mThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Battery with 3 solder pins suitable for  Kawai K5mimportant technical note:the original battery installed in the Kawai K5m has  2 soldering legs at the positive pole with a distance of 8 mm. The battery offered here has 2 soldering legs at the positive pole with a distance of 10 mm. It is possible to bend the two soldering legs forward so that they fit into the holes on the board.The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Attention: Shipping for Europe onlyInformation for handling old Battery's

Black LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5m We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs yellow-green LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5mWe offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  yellow-green BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation the Display in Kawai K5:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs white LCD Display with LED Backlight replacement including cable Kit forKawai K5Kawai K5mWe offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character  /  white BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. Furthermore, minor modifications to the electronics and the power supply are required. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Kawai  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.