Display

Synth-Parts

Clavia Nord OLED Display new white

1 pcs.Clavia Nord OLED Display new white this is a plug in ready Display replacement for Claiva Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation for Nord OLED Display:Here we deliver an OLED display without mounting frame. This mounting frame must be taken from the original display. The OLED display is glued into the frame with adhesive tape. The display can be slowly removed from the frame with a constant pull. Afterwards, please transfer the adhesive tape to the new OLED display. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 54 .99*

Synth-Parts

Clavia Nord OLED Display with Frame new white

1 pcs.Clavia Nord OLED Display with Frame new white this is a plug in ready Display replacement for Clavia Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.This display is clipped onto the circuit board with the frame. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 74 .90*

Synth-Parts

CCFL neon lamp 100 x 2,2 mm for LCD Display Backlight

1 pcs. CCFL neon lamp 100 x 2,2 mm with cape for LCD Display BacklightYamaha PSR-S700Yamaha PSR-S900Safety advice to CCFL tubes:These neon tubes are very sensitive. Handling and mounting must be done very very carefully.The fluorescent tubes are operated with a high voltage of approx. 180V AC. Please observe the corresponding safety regulations of the VDE.

€ 43 .49*

Synth-Parts

Clavia Nord LCD Display new white

1 pcs.Clavia Nord LCD Display new white Replacement LCD Display for Claiva Nord Instruments. For installation soldering is requiered.Notes on installation for Nord LCD Display:This LCD Display is soldered to a PCB only with a small connector. This requieres very good soldering knowlege. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 20,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 58 .99*

Synth-Parts

Korg Krome new LCD Display

1 pcs. LCD Display forKorg Krome

€ 148 .75*

Synth-Parts

Yamaha Clavinova CVP extern 10 Zoll LCD screen new

1 pcs. brand new 10 inch extern LCD Display for Yamaha CVP seriesYamaha has been using color displays of various sizes in the Clavinova CVP models for many years. Displays are subject to natural aging, which leads to the fact that the displays are increasingly difficult to read. Even a readjustment of the contrast is no longer sufficient at some point. Yamaha has a very good spare parts supply for the Clavinova series. However, Yamaha cannot supply the original displays as replacements in all cases.We offer here an external HD LCD display that connects to the external video out of your Yamaha Clavinova CVP model. This ecternel Display shows same screen information as internal Display.The display resolution must be adjusted in many cases from 4:3 to 16:9 so the new display may be slightly blurred.Not an original spare part from Yamaha.Scope of delivery for extern Yamaha Clavinova LCD:1 pc. new LCD display, stand and cable for EU Attention: The color of the display shown may differ slightly from the original. Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components.

€ 148 .75*

Yamaha

Yamaha CP4 CP40 LCD Display new

1 pcs. brand new LCD Display with backlight suitable forYamaha CP4 Stage PianoYamaha CP40 Stage PianoWe offer here the original Yamaha spare part. Scope of delivery:1 pc. new LCD display, ready wired Notes on installation:Please be aware that you are opening an electrical device that is supplied with 230 volts. This work should only be carried out by people who have the appropriate expertise. Notes on disposal:Each electronic component contains important raw materials that should be recycled. Please find out where in your area there is a corresponding collection point for these components.

€ 129 .71*

Yamaha

LCD Display Yamaha RM1X

1 pcs. new LCD Display suitable forYamaha Motif 6Yamaha Motif 7Yamaha Motif 8Yamaha RM1XYamaha RS7000This is only the LCD display without the backlight.The display is connected e.g. in the Yamaha RM1x by plugging the existing cable in the device onto the display. However, the display is supplied without the appropriate socket. Please note that you have to solder here.Original Yamaha spare part.The backlight is unfortunately no longer available.

€ 113 .17*

Yamaha

LCD ASSEMBLY (B) CVP-605B

1 pcs. LCD ASSEMBLY (B) CVP-605BSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 448 .13*

Technics

LCD Display for Technics KN6000

1 pcs. LCD Display forTechnics KN6000Technics KN6000This Display is used.

€ 198 .99*

Synth-Parts

Clavia Nord OLED Display small with Frame new white

1 pcs.Clavia Nord small OLED Display with Frame new white this is a plug in ready Display replacement for Claiva Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation for Nord OLED Display:Here we deliver an OLED display without mounting frame. This mounting frame must be taken from the original display. The OLED display is glued into the frame with adhesive tape. The display can be slowly removed from the frame with a constant pull. Afterwards, please transfer the adhesive tape to the new OLED display. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 96 .00*

Synth-Parts

Clavia Nord OLED Display small new white

1 pcs.Clavia Nord small OLED Display new white this is a plug in ready Display replacement for Claiva Nord Instruments. We deliver this OLED Display ready wired.Notes on installation for Nord OLED Display:Here we deliver an OLED display without mounting frame. This mounting frame must be taken from the original display. The OLED display is glued into the frame with adhesive tape. The display can be slowly removed from the frame with a constant pull. Afterwards, please transfer the adhesive tape to the new OLED display. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 35 .94*

Yamaha

LCD Display for Yamaha Tyros 2

1 pcs LCD Display forYamaha CVP-309Yamaha Tyros 2

€ 474 .81*

Here are Displays. Without tech support for selve mounting.

Filter products

Display