Skip to main content Skip to search Skip to main navigation

Filter products

Nord Stage 4

Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob
1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed. 

8 .45*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob with line 6 mm
1 pcs. Clavia Nord Knob with line 6 mmPraktical tip:The knobs are just plugged on. No tools are needed. 

8 .45*
Fatar

Average rating of 0 out of 5 stars

Contact rubber for Fatar Keyboards
Rubbercontact: 12 Contacts
Contact rubber for Fatar KeyboardsFatar uses in many different keyboards same contact rubber. The here offered contact rubber are suitable for!!!!!   Not for use in Roland Instruments    !!!!!Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP/10 MDRFatar TP/10 ABSFatar TP/40Fatar TP/100LRtechnichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white or greyFatar Keyboards are used by Clavia Nord, Döpfer, Ensonic, Korg, Kurzweil, GEM

Variants from €5.00*
10 .95*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. tactile switch 13 mm Nord Black
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

5 .99*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Housing Screw 16 mm Black Phillips
1 pcs. Screw 16 mm Black PhillipsLength: 16 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one is used for red side panels.

1 .69*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Housing Screw 6 mm Black Phillips
1 pcs. Screw 6 mm Black PhillipsLength: 6 mm Material: Iron blackThis Screw is used in many Clavia Nord instrumnets as Housing screw. This one can be located on rear side or on bottom.

1 .44*
Synth-Parts

Average rating of 0 out of 5 stars

PP Capacitor 4.7 nF Safety
 1 pcs. PP Capacitor 4.7 nF SafetySafety film capacitor suitable for use in mains filters 

1 .99*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch PCB
1 pcs Nord Phone Jack 1/4 - 6.3 mm Mono 1x Switch for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a mono jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phone jack is used by Clavia Nord Instruments often for Sustain Pedal.(This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

7 .75*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm Stereo for PCB
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This Phonejack is used by Nord often for Headphone output and also for Right / LEft Line out. (This infromation is without varanty - Pinlayout of Phonejack is unique. Please complare)Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

8 .25*
Synth-Parts

Average rating of 5 out of 5 stars

Clavia Nord OLED Display with Frame new white
1 pcs.Clavia Nord OLED Display with Frame new white this is  a plug in ready Display replacement for Clavia Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.This display is clipped onto the circuit board with the frame. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

74 .90*
Nord

Average rating of 0 out of 5 stars

Nord Pedal Spring
1 pcs. Nord Pedal SpringOn this Pedal the PCB is fittet with Ground cable.Practice tip:Yamaha has built in a socket on the boards, which are built into the pedal which is perpendicular to the board. Here, the cable is plugged in that leads to the electronics of the electric piano in the upper part. As a result, this beech breaks out in the course of the operating years and it comes to the failure of the pedal.In most Repartur cases, it will be enough just to swap the socket. 

7 .95*
Synth-Parts

Average rating of 0 out of 5 stars

Clavia Nord OLED Display new white
1 pcs.Clavia Nord OLED Display new white this is  a plug in ready Display replacement for Claiva Nord Instruments. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.Notes on installation for Nord OLED Display:Here we deliver an OLED display without mounting frame. This mounting frame must be taken from the original display. The OLED display is glued into the frame with adhesive tape. The display can be slowly removed from the frame with a constant pull. Afterwards, please transfer the adhesive tape to the new OLED display. Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.  

54 .99*
Nord

Average rating of 0 out of 5 stars

Clavia Nord Knob Encoder
1 pcs. Clavia Nord Knob Praktical tip:The knobs are just plugged on. No tools are needed. 

7 .95*
Nord

Average rating of 0 out of 5 stars

Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB
1 pcs. Nord Phone Jack 1/4 - 6.3 mm Stereo 2x Switch PCB used by Clavia Nord PianosTechnical descriptionThe offered phone jack for PCB mounting is a stereo jack with two switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is often used on Clavia Nord instruments for the control pedal and rotor pedal. (This information is without guarantee - please have a look on pinlayout of the phone jack. The pin layout of phone jack is unique.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

7 .45*
Nord

Average rating of 0 out of 5 stars

Nord LED lens, 6 arrows
Nord LED lens, 6 arrows The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

8 .16*
Nord

Average rating of 0 out of 5 stars

Nord LED lens surround 6
1 pcs Nord LED lens surround 6 The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

7 .14*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. tactile switch 13 mm Nord light gray
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

6 .45*
Nord

Average rating of 0 out of 5 stars

Clavia Nord 4 way Power Supply IEC14 V1.3
1 pcs. Clavia Nord 4 way Power Supply IEC14 V1.3  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 10-pole ribbon cableThis Power supply deliver:+ 3.3 Volt+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

219 .00*
Nord

Average rating of 0 out of 5 stars

Nord LED lens single
1 pcs Nord LED lens single The LED lens assembly is a crucial component that enhances the visual feedback of the instrument’s control elements. These assemblies are designed for specific models and ensure optimal functionality.Product OverviewFunction: The LED lens assembly serves as a transparent cover that diffuses the light from the underlying LED, providing clear and consistent illumination. This visual feedback is essential for users to monitor parameter changes in real time.Compatibility: The LED lens is used in many Nord models and ensures good visibility of the LEDs.This is a replacement part that we source directly from Clavia Nord.Design: Made from durable materials, the LED lens is designed to withstand regular use while maintaining clarity and brightness.Manufactured from plastic. 

2 .00*
Nord

Average rating of 0 out of 5 stars

Clavia Nord 3 way Power Supply IEC14 12p connector
1 pcs. Clavia Nord 3 way Power Supply IEC14 12P Connector  brand new replacement power supply for many Clavia Nord models.Please pay attention to the mains connection: This power supply has a 3-pin IEC C14 connector. Older Clavia Nord models use a 2-pin Euro connector. Secondary side: 12-pole ribbon cableThis Power supply deliver:+5 Volt+/-12 VoltSafety note: Here you are working directly on the mains voltage of 230 VAC. This work is only suitable for people with appropriate electrical knowledge. 

219 .00*
Synth-Parts

Average rating of 0 out of 5 stars

Nord Duo pole push switch, 250V/6A, soldering
1 pcs. Nord duo-pole push switch in the switch design - OFF with solder Pins for Kable mounting suitable for modelsClavia Nord instrumentstechnical Dates:Voltage: 250VACCurrent: 6ATermination Solder VDE-tested Supplied without capMechanical Description:The housing of the switch is made of Plastic. The switch is provided for soldering. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 15 mm, a length of 30 mm and a height of 9 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 5 A at 250 VAC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

14 .93*
Nord

Average rating of 0 out of 5 stars

Clavia Nord PSU Transformer 22770
1 pcs Clavia Nord PSU Transformer 22770 Electrical properties of 22770:Primary: 230 V AC or 2 x 115 V ACSec: 4 x 7,5 Volttransformer for PCB mountingPractical advice:Plug of the device. Don't work under Voltage. 

69 .00*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. tactile switch 13 mm Nord Red
1 pcs. tactile switch suitable for modelsNord ComboNord ElectroNord LeadNord ModularNord PianoNord StageThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

6 .78*
Synth-Parts

Average rating of 0 out of 5 stars

Nord Rotary Poti 12 mm, 10kOhm center click
1 pcs. Nord Rotary Potentiometer vertikal 12 mm with center click, 10kOhm  Electrical properties:The nominal resistance has 10 kilo-Ohm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 12 x 11 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

12 .90*

Nord Stage 4 spare parts easy to buy online



The Nord Stage 4 digitalpiano is a digital piano designed for professional use by professional and amateur musicians. If an electric piano from Clavia Nord is used a lot then the individual components of the Nord Stage 4 electric piano are subject to wear. Anyone who likes to play a lot on his Nord Stage 4 e-piano will need a key from the keyboard as a spare part at some point. But also the contact rubber or the sensorboard in the keyboard of the Nord Stage 4 e-piano may need to be replaced by a new component. During frequent use of headphone of the Nord Stage 4 e-piano the phone jack are stressed hard. Also power supply or the power cord are parts that can be damaged over time. If after many years of trouble-free music making you can hear crackling and popping in the speaker, then most likely the volume control potentiometer is defective. With us you can easily buy a new potentiometer for your Nord Stage 4 Digital Piano.



We supply spare parts for Nord Stage 4 electric piano worldwide.



We are your reliable supplier for spare parts of your Nord Stage 4 electric piano. We offer our spare parts like phone jack socket, tact switch or volume potentiometer in our online store. We also have the matching potentiometer usually permanently in stock. Original Clavia Nord spare parts like contact rubber, key and sensorboard we also have in our assortment. Spare parts we have partly also in OEM quality for the Clavia Nord stage piano in stock. For us OEM quality means that we get spare parts such as tact switch, potentiometer or phone jack directly from the same supplier from which Clavia Nord buys the components. Our original Clavia Nord spare parts like Potentiometer, contact rubber or sensorboard are usually shipped with Deutsche Post or DHL. If the delivery of your needed spare part for the Nord Stage 4 E-Piano is especially urgent, please contact us. We can also organize an express delivery with UPS.