Technics SX-PR53

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

Technics

Technics RH3 keyboard felt keylimit upper

1 Pc Technics Top Keystroke Felt for Electric Piano KeyboardsThis felt is used by Technics in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 4 times.

€ 9 .50*

Technics

Technics RH3 Tastatur hammer lower limit felt

1 Pc. Technics Lower Hammer Stop Felt for Electric Piano KeyboardsThis felt is used by Technics in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times.

€ 10 .95*

Technics

Technics RH3 Keyboard felt keylimit lower

1 Pc. Technics RH3 Bottom Keystroke Felt for Electric Piano KeyboardsThis felt is used by Technics in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 2 times.

€ 9 .50*

Technics

Replacement keys for Technics SK25 Keyboard, purwhite

Key: Key A

Replacement Keys for Technics SK25 KeyboardSK25 keyboard is used in Technics PR-603Technics PR-703 Color: pur whiteThe SK25 keyboard is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

€ 12 .48*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Technics

Cap quadratic for power switch in Technics E-Pianos

Cap quadratic for power switch suitable in Technics E-PianosTechnics PX101Technics PX103Technics PX107Technics PX111

€ 7 .90*

Technics

Fader knob for Technics E-Piano

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with white line

€ 9 .52*

JST

JST FJ Plug 5 pin for printed circuits

JST FJ Plug 5 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Plug 10 pin for printed circuits 10PL-FJ

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 10 pin for printed circuits 10R-FJ

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 5 pin for printed circuits

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

Technics

Contact rubber SK25 for E-Piano Keyboard

1 pcs Contact rubber SK25 for Technics E-PianoFor the complete exchange of the contact strips in a keyboard with 88 keys 7 contact rubbers with 12 contacts and 1 contact rubber with 4 contacts are required.

€ 12 .90*

Technics

Parts SK25 Keyboard for technics E-Pianos

Parts Keyboard: Keyguide

Spare Parts for SK25 Keyboard Here you will find parts for SK25 Keyboard, like Felts, Springs and Contact Rubber

€ 4 .25*

Technics

Technics RH3 keyboard felt hammerlimit upper

1 Pc. Technics Upper Hammer Stop Felt for Electric Piano KeyboardsThis felt is used by Technics in many keyboards and dampens the hammers when they are moved against the frame when a key is pressed. This felt consists of several layers of different materials. For better assembly, this felt is equipped with adhesive tape. The felt is designed for an 88-key keyboard. If you have the 73 key version, the felt can be shortened.For a complete 88 key keyboard, you need this part 1 times.

€ 34 .00*

Technics

Hammer for Technics SK25 Keyboard

Hammer: Hammer Zone 1 white key

Replacement Hammer for Technics SK25 KeyboardThis Keyboard is used in these ModellTechnics PC-25Technics PR-52Technics PR-53Technics PR-54Technics PR-554Technics PR-603Technics PR-604Technics PR-703Technics PR-804Technics PR-903Technics PX-552Technics PX-663The Technics SK25 keyboard is a 4 zone hammer mechanism.The manufacturer uses a total of 8 different hammers, since in addition to the 4 zones, a different hammer is used for the white and black keys.

€ 11 .78*

Technics PR53 E-Piano with noisy keys

The keys of your Technics electric piano clatter loudly. You may hear a metallic clack when you release the keys? Your Technics PR53 piano has a built-in hammer mechanism keyboard. This means that under the key a hammer sits which is moved with each keystroke. In the resting position, this hammer rests on a felt. During the years of operation of your electric piano this felt wears out. Due to this wear of the piano felt, this hammer strikes the frame or the case of the your e-piano.
The whole thing can be solved by replacing the felt. We offer two different solutions for this case. The simple solution is. That you put an extra felt in front of the worn out felt. This solution is easy and fast. The second, more elaborate solution is to replace the old and worn out felt with a new felt. Unfortunately, it is quite expensive to completely remove the old felt. Gluing in the new felt is easy again.

Technics PR53 spare parts and replacement keys

Looking for a spare part for your Technics PR53 e-piano? We have many spare parts for Technics E-Pianos like replacemet keys, springs or key guides in stock. You are looking for other wearing parts such as felt or switchs. Even in these cases, we can help out with brand new spare parts. We offer you repaired electronics assemblies new power cables and replacement speakers for your Technics PR53 in our online shop to install yourself.

Filter products

Technics SX-PR53

Technics PR53 E-Piano with noisy keys

Technics PR53 spare parts and replacement keys