Memory Card

Synth-Parts

Roland MKS-50 OS Version 3.0

1 piece EPROM with ROLAND MKS-50 OS version 3.0 with OLED Support.we offer here a Customized OS version for the Roland MKS-50. This OS version is required if a new OLED display is to be installed in the MKS-50.Mounting instructions for the EPROM in the Roland MKS-50:Soldering may be required if the EPROM in the Roland MKS-50 is not socketed.In very many cases EPORMs are plugged in on a socket from the factory. But it can happen that the EPROM is soldered directly. In this case the EPROM would have to be desoldered. In this case it is advisable to retrofit the IC socket.Practical notes:IC's/Eproms are sensitive to static charge!Recycling of E-Proms:The best recycling is always the reuse in the original form. We will be happy if you send us back your old eprom. We will then reuse it with the updated OS version.

€ 23 .49*

Synth-Parts

Yamaha DX7 II OS Version 1.9 EPROM

1 piece EPROM with Yamaha DX7 II OS version 1.9we offer here a OS version for the Yamaha DX7 IIMounting instructions for the EPROM in the Yamaha DX7 II:Soldering may be required if the EPROM in the Yamaha DX7 II is not socketed.In very many cases EPORMs are plugged in on a socket from the factory. But it can happen that the EPROM is soldered directly. In this case the EPROM would have to be desoldered. In this case it is advisable to retrofit the IC socket.Practical notes:IC's/Eproms are sensitive to static charge!Recycling of E-Proms:The best recycling is always the reuse in the original form. We will be happy if you send us back your old eprom. We will then reuse it with the updated OS version.

€ 16 .95*

Synth-Parts

Flash Rom MBM29LV160BE90TN replacement equivalent

1 pcs. Flash ROM 16Mas replacement for MBM29LV160BE90TN Mechanical Description:This flash rom is housed in a TSOP48 package and is designed for SMD mounting on a circuit board. This part sensitive to static charge

€ 24 .49*

Synth-Parts

Roland Juno 1 OS Version 4.0 EPROM

1 piece EPROM with ROLAND JUNO 1 OS version 4.0 with OLED Support.This OS works only in Juno-1.we offer here a Customized OS version for the Roland Juno1 . This OS version is required if a new OLED display is to be installed in the Juno1 .Mounting instructions for the EPROM in the Roland Juno1 :Soldering may be required if the EPROM in the Roland Juno1 is not socketed.In very many cases EPORMs are plugged in on a socket from the factory. But it can happen that the EPROM is soldered directly. In this case the EPROM would have to be desoldered. In this case it is advisable to retrofit the IC socket.Practical notes:IC's/Eproms are sensitive to static charge!Recycling of E-Proms:The best recycling is always the reuse in the original form. We will be happy if you send us back your old eprom. We will then reuse it with the updated OS version.

€ 23 .49*

Yamaha

Yamaha PROM #39

EPROM für Yamaha E-PianosPROM#39This part is used inYamaha PF10Yamaha PF15

€ 44 .49*

KORG

Korg Krome Memory card

1 pcs. Korg Krome Memory card 4GB

€ 64 .89*

ALPS

1,44 MB Disc ALPS DF354H

1 pcs. 1,44 MB Disc ALPS DF354H

€ 58 .99*

Synth-Parts

Floppy2USB Yamaha SY99 Floppy Emulator

1 pcs. Floppy2USB Adapter suitable for Yamaha SY-77Yamaha SY-99

€ 115 .00*

Synth-Parts

ipcas Disc-Manager Software for Windows

1 pcs. ipcas Disc-Manager Software for WindowsFloppy2USB disk management software for Windows.---- Without support --The manufacturer IPACS does not offer this tool anymore.

€ 1 .19*

Synth-Parts

Roland Juno 2 OS Version 2.5 EPROM

1 piece EPROM with ROLAND JUNO 2 OS version 2.5 with OLED Support.This OS works only in Juno-2.we offer here a Customized OS version for the Roland Juno2 . This OS version is required if a new OLED display is to be installed in the Juno2 .There are two OS versions 2.5Roland released version 2.5 as the last official OS version. This version was then changed again for OLED support. The version number was not incremented. The OS version with OLED support is not an official Roland version.Mounting instructions for the EPROM in the Roland Juno2 :Soldering may be required if the EPROM in the Roland Juno2 is not socketed.In very many cases EPORMs are plugged in on a socket from the factory. But it can happen that the EPROM is soldered directly. In this case the EPROM would have to be desoldered. In this case it is advisable to retrofit the IC socket.Practical notes:IC's/Eproms are sensitive to static charge!Recycling of E-Proms:The best recycling is always the reuse in the original form. We will be happy if you send us back your old eprom. We will then reuse it with the updated OS version.

€ 23 .49*

Synth-Parts

Floppy2USB Technics KN6000 Floppy Emulator

1 pcs. Floppy2USB Emulator suitable for Technics KN6000 We deliver this Floppy2USB drive with a suitable adapter cable. The installation is easy to accomplish.Much more complex is the transfer of the floppy disks to the USB stick. This requires an old PC that still has a floppy drive and a USB post. Here there is a software that supports copying.

€ 125 .00*

Synth-Parts

Floppy2USB Yamaha 9000Pro Floppy Emulator

1 pcs. Floppy2USB Emulator suitable for Yamaha 9000Pro We deliver this Floppy2USB drive with a suitable adapter cable. The installation is easy to accomplish.Much more complex is the transfer of the floppy disks to the USB stick. This requires an old PC that still has a floppy drive and a USB post. Here there is a software that supports copying.

€ 125 .00*

Filter products

Memory Card