Yamaha KX-series

1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie    -  without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. tactile switch suitable for modelsKorg DW6000, DW8000Korg Poly 61Korg KPR 77Roland JX 8PRoland TR606, TB303Yamaha DX7, DX9Oberheim Matrix 6Kurzweil K1000Kurzweil K2000Part Number: Korg: 37505000, Roland: 1129715,Yamaha: KA905510The old productnumber was called: KHC10901The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ-0520-01-010HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

Yamaha Spezial Keyboard grease, Blue 50gOriginal Yamaha plastic grease for Keyboards. Color is blue and will be delivered in a 50 gramm portion.Molycote G-1066YThis grease is used on YamahaOn GHD and GH3 keyboards on the fulcrum - Where the key engages the frame.For pedals at the mechanical moving parts. 

1 pcs. slide potentiometer with 30mm travel. Suitable Slider forData Entry für  Yamaha DX7 Yamaha DX9 Yamaha DX11Yamaha DX27 Yamaha DX100 This volume control with the labelling EWANA0C10B14 is no longer available from the manufacturer Panasonic, because it is no longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.  Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. new Contactrubber for Yamaha 16NW KeyboardThis keyboard is used in these modells:Yamaha MOX6Yamaha Tyros 1Color of these Contactrubber may be different.

1 pcs. Yamaha GHL Stopper L88 - lower FeltThis GHL keyboard is used in these modells and others:Yamaha P-70Yamaha YDP-131 

1 pcs. Yamaha GHL Actuate Rubber This rubber is used on every singel key as stopperColor: black

1 pcs. HEC470-01-630 DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha P-85Yamaha P-140We offer the original Hosiden power socket here.technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting.  Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

1 pcs. Yamaha GHL Stopper U88 This GHL keyboard is used in these modells and others: Yamaha P-70Yamaha YDP-131

1 pcs. new Contactrubber for Yamaha GHL KeyboardThis keyboard is used in these modells:Yamaha P-35Yamaha P-70Yamaha P-105Yamaha AriusYamaha MOXD8Yamaha MOXF8Color of these Contactrubber may be different.

1 pcs. Yamaha contact PCB for Yamaha GHL88 KeyboardThis keyboard is used inYamaha P-115Yamaha P-125Yamaha YDP-S30Yamaha YDP-143

1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5050 These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Yamaha USB Socket Typ B PCBJalco used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. Encoder 16 mm widht suitable forYamaha Tyros 1Yamaha Tyros 2Yamaha CVP-207Yamaha CVP-209 Part numbers:Yamaha      VU48130R  REB161-PVB  

Yamaha GHL Key's  This keyboard is used in these modells:Yamaha P-120Yamaha P-125Yamaha YDP-S30Yamaha YDP-143Color: whiteNote on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.mechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

Replacement Keys and parts for Yamaha A KeyboardYamaha A keyboard is used inKorg 01/W ProXKorg T1Yamaha CLP-50Yamaha PF15Yamaha A Keyboard is a very old Keyboard with weighted keys.

1 pcs external Power Supply Unit Yamaha PA-130B Replacement for Yamaha PA-3C PSU Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage. 

1 pcs.  Yamaha FFC cable for GHL KeyboardKeyboard connection cableThis cable connects Yamaha GHL Keyboard with Mainboard   

Key's 16N unweighted suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-e403Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

Contact PCB for Yamaha 16NW keyboard PCB high

1 pcs. Yamaha KX series OLED Display new white this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 Mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new yellow this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new blue this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.