Korg M1

ALPS

tactile switch 9,5 mm for Korg Synthesizer

1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707 all expect 0 - 9Korg ProphecyKorg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .64*

Nichicon

Bipolar Capacitor 1uF/50V for Audio, Radial, Nichicon Muse ES

1 piece bipolar Elko 1uF/50V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .98*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Nichicon

Bipolar Capacitor 10uF/16V for Audio, Radial, Nichicon Muse ES

1 piece bipolar Elko 10uF/16V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .93*

Nichicon

Bipolar Capacitor 22uF/16V for Audio, Radial, Nichicon Muse ES

1 piece bipolar Elko 22uF/16V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .83*

E-Switch

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 9 .45*

ALPS

Value Slider 30mm Travel for Korg

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

Yamaha

Replacement keys and parts for FS Keyboard

Key: Aftertouch 76

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition

Variants from €0.67*

€ 88 .99*

Synth-Parts

Korg M1 recapping set complete unit

Korg M1 recapping set complete unit The Capacitors are firmly soldered to a circuit board. For replacing the capacitors craftsmanship and experience in soldering is required.

€ 43 .49*

Synth-Parts

5 pcs. Contact Cleaning Stripes for electrical contacts

5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.

€ 11 .90*

Synth-Parts

Korg M1 LCD Display new Yellow

1 pcs. LCD Display brandnew in Yellow forKorg M1this is a plug in ready Display replacement for Korg M1. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired.Not compatible with M1r. This Display is a separate item.The color of the shown display, may differ from the original.These different Display versions are available:BlueblackWhiteYellowInstallation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 63 .50*

Synth-Parts

Rotary Pot for LCD Contrast L=15 B10K

Rotary potentiometer for LCD Contrast adjustmentThis pot is for these models:M1, M1r, M3rT1, T2, T3WavestationKorg spare part No.: 360021200The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 4 .44*

Varta

CR2032

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Synth-Parts

Rotary Pot for LCD Contrast L=20mm

Rotary potentiometer for LCD Contrast adjustment The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 4 .28*

Jalco

Korg triple female MIDI Socket for PCB, Jalco, YKF51-5046

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*

ALPS

Korg M1 Volume Slider

1 pcs. Korg M1 Volume Slider The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

Synth-Parts

Korg M1 OLED Display new yellow

1 pcs. Korg M1 OLED Display brandnew in yellow this is a plug in ready OLED Display replacement for Korg M1 Keyboard Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Korg M1. The OLED display itself is supplied pre-wired. No soldering is requiredNot compatible with Korg M1R Rack Synthesizer. This Display is a separate item.Mounting instructions for Korg M1 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly: The display in the Korg M1 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Korg M1 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Korg M1 Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 108 .99*

Varta

CR2016 for PCM Card

1 pcs. CR2016 forKorg M1 PCM CardRoland JD-800 PCM CardAttention: Shipping for Europe only Technical Description:The dimensions of CR2016 are diameter of 20 mm and a thickness of 1,6 mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

KORG

Korg M1 230V PSU reconditioned

1 pcs. 230V Switching Power Supply for Korg M1, reconditionedKLM-1269 This Power Supply Board is fully reconditioned, like new. 230V Version

€ 124 .95*

Synth-Parts

Korg M1 LCD Display new blue

1 pcs. LCD Display brandnew in blue forKorg M1this is a plug in ready Display replacement for Korg M1. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired.Not compatible with M1r. This Display is a separate item.The color of the shown display, may differ from the original.These different Display versions are available:BlueblackWhiteYellowInstallation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 63 .50*

Synth-Parts

D/A-Converter PCM54HP, DIP28

1 pcs. PCM54HP - Digital-Analog-Converter for audio application von Burr BrownThis part is used inKorg M1Korg T1Korg T2Korg T3 Resolution: 16bitInterface: parallelCase: DIP28warm-up time: 1 minMechanical Description:The digital to analog converter is housed in a DIP 28 package and is designed for classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 2.54 mm x 15.24 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is parallel and provides a 16 bit resolution. It is a symmetrical supply voltage of +- 5V to +- 12V needed.

€ 17 .85*

Yamaha

Key contact board for FS Keyboard

Rubbercontact: 12 Contacts

1 pcs. key contact board suitable FS keyboardsThis key contact is usedWidth: 6 cmheigh: 1,4 cmContact Resitance: lower 1 Ohm

€ 34 .00*

Synth-Parts

Korg M1 OLED Display new white

1 pcs. Korg M1 OLED Display brandnew in white this is a plug in ready OLED Display replacement for Korg M1 Keyboard Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Korg M1. The OLED display itself is supplied pre-wired. No soldering is requiredNot compatible with Korg M1R Rack Synthesizer. This Display is a separate item.Mounting instructions for Korg M1 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly: The display in the Korg M1 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Korg M1 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Korg M1 Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 108 .99*

Korg M1 Musicworkstation

Korg introduced 1988 M1 on the market. The first electronic keyboard instrument in the new segment Musikworkstaion. The M1 was built until 1994.

We offer in our shop a wide range of spare parts for the Korg M1 so that even after more than 30 years, the functionality can be guaranteed. As far as possible the potentiometer, tactile switch, button cell, IC and midi and phone jacks, we offer new components. In the area of the keyboard, or cabinet, we can only rely on used parts that are tested and cleaned by us.

Filter products

Korg M1

Korg M1 Musicworkstation