Technics Keyboards

E-Switch

Single pole push switch, 250V/5A with solder lugs SDDLD10900

Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Technics

Keys for Technics Keyboard Ivory

Taste: Key A

1 pcs. Replacement Keys for Technics KeyboardsThis Keyboard with single Keys is used by Technics in many of there Keyboards.These Keys are unweigted and in Color Creme White also called Ivory.This parts are used and in a good condition.Important NOTE:For this Keyboard Version Tehnics used different P.C.B.'s and differernt Contactrubber. Please have a exact look on your Keyboard if you need a replacement P.C.B or replacement Contactrubber.

Variants from €4.89*

€ 12 .95*

Synth-Parts

Plastic grease for Technics Keyboards 30g

30 g can of plastic grease for Technics keyboardswe offer here a grease that is specially made for plastic parts.Especially for Technics keyboards we have collected very good experience.This plastic grease has good creep properties that are only partially desirable for a keyboard. Please apply only very sparingly so that the grease is not deposited on the felts.Not to be used for Fatar keyboards.For moving plastic parts.

€ 13 .49*

ALPS

Encoder 12 mm Technics short axis

1 pcs. Encoder 12 mm footprint and extra short axis suitable for modelsTechnics KN5000Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 14 .40*

Panasonic

tactile switch 7 mm technics

1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for: PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000 The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Taiwan Alpha Electronic Co., LTD.

Encoder 16 mm for Technics KN6000

Encoder 16 mm widht suitable forTechnics KN6000 Practical advice:The thread of this encoder is 2 mm longer than the thread of the ALPS encoders These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .87*

Technics

Dial Knob Technics KN6000

1 pcs Dial Knob suitable forTechnics KN6000

€ 9 .89*

Synth-Parts

D/A-Converter PCM1728E SSOP28

1 pcs. PCM1728E SSOP28Digital-Analog-Converter for audio application forResolution: 24bitInterface: seriellNumber of DAC outputs: 2Number of channels: 1Case: SOOP28Mechanical Description:The digital to analog converter is housed in a SOOP258 package and is designed for SMD mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 0.63 mm x 3.8 mm.Technical Description:The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 18 bit resolution. For operation, no external components, such as temperature compensation or similar is required.It is a supply voltage of + 5V needed.

€ 20 .23*

Technics

4,72 inch Speaker for Technics EAS-12P458 used

4,72 inch midrange speaker, Technics EAS-12P458A3 or EAS-12P458JB3Asuitable forTechnics E-PianosTechnics Keyboards

€ 14 .90*

Technics

2,36 inch Speaker for Technics EAS-65PH31 used

2,36 inch highrange speaker, Technics EAS-65PH31A3 oder EAS-65PH31D3suitable forTechnics E-PianosTechnics Keyboards

€ 10 .76*

Visaton

4.32 inch Speaker for Technics EAS-12P458 NEW

4 inch midrange speaker, substitute für 4.32 inch Technics EAS-12P458A3 or EAS-12P458JB3ANEWsuitable forTechnics E-PianosTechnics KeyboardsPractical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 22 .90*

Visaton

2,36 inch speaker for Technics EAS-65PH31 NEW

1 pcs. New 2,36 inch highrange speaker, replacement for Technics EAS-65PH31suitable forTechnics E-PianosTechnics KeyboardsTechnics OrgansCone tweeter with special basked for the high-frequency range above 5000 Hz.Balanced frequency response with brilliant highs and high power handling.No separate high-frequency range housing construction necessary.Suitable as replacement unit for many HiFi speakers.

€ 26 .49*

Visaton

6,5 inch Speaker for Technics EAS-16PL NEW

1 pcs. 6,5 inch low-midrange speaker as replacement for Technics EAS-16PL470A3 or EAS-16PL403Asuitable forTechnics E-PianosTechnics Keyboardstechnical description:The speaker built in originally from Technics has become porous and brittle with age. We have found in cooperation with the Visaton the best possible replacement speaker and we are proud to offer this one here.This speaker is a low-midrange driver with a strong bass. The installation dimensions of the speaker are 170 mm in diameter at an installation depth of 73 mm. For fastening the speaker has four bores in the housing which are mounted on a diameter of 159 mm. The original Technics speaker has a 3 mm smaller diameter for fastening. The installation of the new speaker can be a little bit difficult.Practical tip:The speaker is mechanically fixed wirh 4 nuts. The electrical connection is made with plug-in cable shoes. We deliver a cable shoe adapter. This is necessary because the new speaker to the positive terminal has a larger cable lug used as the original Technics speakers.

€ 39 .00*

JST

JST FJ Plug 5 pin for printed circuits

JST FJ Plug 5 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Plug 10 pin for printed circuits 10PL-FJ

JST FJ Plug 10 pin for printed circuitthis FJ Plug form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 10 pin for printed circuits 10R-FJ

JST FJ socket 10 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

JST

JST FJ Socket 5 pin for printed circuits

JST FJ socket 5 pin for printed circuitthis FJ Socket form JST is used by Technics E-Pianos for connecting Printid Circuit Boards. Pitch: 2.0 mmThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 1 .79*

CUI Inc.

MINI DIN male 8 pin for Technics E-Pianos

Mini Din plug male 8 pin for printed circuitthis mini din plug is used by Technics E-Pianos for connecting foodswitch. Technics used two different Mini DIN plugs. It can be a 4 pole or a 8 pole version.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .21*

CUI Inc.

MINI DIN female 8 pin for printed circuits

Mini Din socket female 8 pin for printed circuitthis mini din socket is used by Technics E-Pianos for connecting foodswitch.Technics used two different Mini DIN sockets. Sometimes it is a 4 pole or in other cases it is a 8 pole socket.These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 3 .65*

Hosiden

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuitHosiden HLJ7101-01-3010 This phone jack is no longer manufactured and there are only remaining stocks.This part is used inRoland Fantom FARoland Fantom S88Roland Fantom X6Roland Fantom X7Roland Fantom X8Technics E-PianosTechnics KeyboardsPlease have a very detailed view on the picture. There is one Phone Jack very similar.Technical descriptionThe offered phone jack for PCB mounting is a Mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 7 .25*

Technics

Mainboard QJBG2320 for Technics KN6000, tested with 1 year warranty

1 pcs. Mainboard QJBG2320 for Technics KeyboardTechnics KN6000These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.

€ 288 .99*

Nichicon

Gold-Cap 1F/5.5 V

1 piece Gold-Cap 1 F/5,5 V Manufakturer: Elna or Panasonic

€ 4 .34*

Technics

Transformer Technics QTPG1M029A

1 pcs. Transformer Technics QTPG1M029AThis Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer.

€ 98 .00*

Technics

AC-IN Circuit QJBG2164 for Technics, used

AC-IN Circuit QJBG2164 for Technics, usedThese board is tested by us and fully working. We sell it with one year warranty.

€ 24 .89*

Filter products

Technics Keyboards