Friedrich-Engels-Allee 161A, 42285 Wuppertal, Germany
We 10 am - 5 pm
Fr 10 am - 2 pm
Or via our contact form.
Go to homepage
€0.00

Filter products

Yamaha DX9

CR2032 Solder pin for Yamaha DX-Series
Varta
CR2032 Solder pin for Yamaha DX-Series
1 pcs. CR2032 with 2 solder pin suitable forYamaha DX7, DX7 II, DX9, DX27, DX100Yamaha TG77Yamaha RX5, RX7, RX11Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The distance between the solder legs is 15 mm.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 3 .49*
Yamaha DX-Serie Volume Slide potentiometer - EWA-NFOC
Synth-Parts
Yamaha DX-Serie Volume Slide potentiometer - EWA-NFOC
1 pcs. Volume Slide potentiometer with 30mm travel. Suitable for Yamaha DX7Yamaha DX9Yamaha DX11Yamaha DX21Yamaha DX27Yamaha DX100 This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From
€ 7 .74*
Recapping Set PSU for Yamaha DX7,DX9
Synth-Parts
Recapping Set PSU for Yamaha DX7,DX9
Recapping set Power Supply for Yamaha DX7,DX9The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the power supply in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90330 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 19 .40*
Yamaha DX-Serie Slidepotentiometer Data Entry - EWANA0C10B14
Synth-Parts
Yamaha DX-Serie Slidepotentiometer Data Entry - EWANA0C10B14
1 pcs. slide potentiometer with 30mm travel. Suitable Slider forData Entry für  Yamaha DX7 Yamaha DX9 Yamaha DX11Yamaha DX27 Yamaha DX100 This volume control with the labelling EWANA0C10B14 is no longer available from the manufacturer Panasonic, because it is no longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.  Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

From
€ 7 .74*
Yamaha DX7 Recapping Set Mainboard
Synth-Parts
Yamaha DX7 Recapping Set Mainboard
Recapping set Mainboard for Yamaha DX7The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Yamaha DX series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the Mainboard in the Yamaha DX7, DX9. Spare part number of the PSU board: LC90370 The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

€ 16 .54*
Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometer
Synth-Parts
Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometer
Slider Set for Yamaha DX-Serie - EWA-NFOC potentiometerSlider Set suitable for modelsYamaha DX 7Yamaha DX9Yamaha DX11Yamaha DX21Yamaha DX27Yamaha DX100Set contains:1 pcs. Slider for Volume1 pcs. Slider for Data EntryUseful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 11 .90*
Yamaha DX7 OLED Display NEW blue LCD Replacement
Synth-Parts
Yamaha DX7 OLED Display NEW blue LCD Replacement
Color: Blue
1 pcs. OLED Display blue New forYamaha DX7Yamaha DX9This Display replacement is a really easy swapping. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

€ 54 .70*
Cable straight thru 12,7 x 11,7 mm
Synth-Parts
Cable straight thru 12,7 x 11,7 mm
1 pcs. Cable straight thru 12,7 x 11,7 mmThis Cable straight thru is used by 2 pol power cords.Dimensions of mounting hole: 12,7 x 11,7 mm

€ 0 .68*
DIN female 5 pin MIDI for printed circuits, Jalco, YKF51-5066
Jalco
DIN female 5 pin MIDI for printed circuits, Jalco, YKF51-5066
1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5066used by:KorgRolandYamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 13 .09*
Yamaha DX7 LCD Display new
Synth-Parts
Yamaha DX7 LCD Display new
Color: Blue
1 pcs. LCD Display brandnew forYamaha DX7this is  a plug in ready Display replacement for Yamaha DX7. You will only need a screwdriver for this replacement.These different Display versions are available:BlueOrangeWhiteFor this replacement you will only need a screwdriver. We deliver this LCD Display plug in ready.Attention on the Orange Display: Here, a height difference of 3 mm must be bridged or compensated.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

€ 48 .99*

Maintaining and Upgrading Your Yamaha DX9

The Yamaha DX9 is a classic synthesizer known for its distinctive sound and robust design. However, like any electronic instrument, it may require maintenance or upgrades over time to ensure optimal performance. This guide explores the various options available for keeping your DX9 in top condition.

Essential keyboard spare parts for the Yamaha DX9

Over time, the keys of your DX9 may experience wear and tear. Replacing them with high-quality replacement keys ensures smooth playability. Additionally, the keybed parts may need attention to maintain the tactile response and mechanical integrity of the keyboard.

Addressing Electrical Components

The DX9's internal components, such as the contact rubber, are crucial for accurate key response. If these components degrade, replacing them can restore functionality. Furthermore, components like the potentiometer and tactile switch may require replacement to maintain precise control over sound parameters.

Display and Interface Enhancements

Upgrading the display of your DX9 can significantly improve usability. Consider an LCD display replacement for a clear and reliable interface. For a modern touch, an OLED display upgrade offers enhanced visibility and durability.

PCB and Circuit Repairs

If your DX9 encounters issues with its circuitry, PCB repair services can address faults and restore functionality. Opting for OEM spare parts ensures compatibility and quality, while sourcing EOL spare parts can help maintain the authenticity of this vintage synthesizer.

Professional Repair Services

For complex repairs or upgrades, a professional repair service can provide expertise and ensure your DX9 remains in excellent condition. These services often include diagnostics, component replacement, and performance optimization.

Maintaining your Yamaha DX9 with the right parts and services not only preserves its value but also enhances your musical experience. Whether you're replacing components or upgrading features, these solutions ensure your synthesizer continues to perform at its best.