Korg PolySix
ALPS
tactile switch 4,3 mm
1 pcs. tactile switch suitable for modelsKorg MonopolyKorg PolySixKorg BX3/CX3 first Version build in 1980'sRoland JX 10PRoland Jupiter 8Roland TR808Part Number: Korg: 37503400, Roland: 13169601The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
€
0
.93*
KORG
Korg ESK7 Rubbercontact 6P x1
1 pc. Korg ESK7 Rubbercontact 6P x1 Features: Height of contacts: 8 mm width of the strip: 15 mm Length of the strip: 80 mm Number of contacts per strip: 6 contactsOne contact strip consists of 6 contacts and thus covers halfe octave.
€
13
.90*
NKK Switches
Single pole rocker switch 250V/6A with solder lugs
Single pole rocker switch with solder lugs suitable for modelsKorg MonoPolyKorg PolySixKorg Part Number: 375016006A / 250VACTermination Solder Lug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested Mechanical Description:The switch housing consists of polycarbonate. The switch is provided for a snap-in mounting in a housing and having corresponding spring lips on the narrow side of the housing. Housing cutout for installation should be 19.30 mm x 12.90 mm. The switch itself has a width of 12.90 mm, a length of 18.50 mm and a height of 13.60 mm plus 3 mm height of the rocker. The outside dimensions are 20.8 mm x 14.8 mm.Electrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made with solder lugs for cable assembly. The length of the terminals is 2.9 mm with a width of 3 mm.The electrical load is 6 A at 250 VAC.Knowledge in soldering is required for switch replacement.
€
4
.76*
Varta
Varta 3/V 150 NI-MH Akku with solder pins for Korg
Varta 3/V 150 NI-MH rechargeable with 2 solder pin suitable forKorg PolySixKorg Poly-61Varta produces two almost identical batteries of this type. The main difference is the design of the housing.Attention: Shipping for Europe only Dimensions for PCB layout: 17,7 x 10 mmTechnical Description:The dimensions of 3V/150 are hight of 26,8 mm and a deepth of 17,7 mm. The distance between the solder legs is 17,7 mm. The + pol has to legs with a distance of 10 mmThe akku is charged and ready for use.Practical tip:The akku is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's
€
10
.95*