Yamaha Motif Serie

Panasonic

tactile switch 9,5 mm Yamaha

tactile switch suitable for Yamaha ModellsRS7000 (REC/Play/Stop/<)RM1X (Control Buttons without Keyboard)Motif 6, Motif 7,Motif 8 (switch without LED)Motif XS, Motif ES (switch without LED)Yamaha Part Number: VZ085500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Panasonic

tactile switch 7 mm Yamaha

1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie - without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Yamaha

Yamaha GH3 Stopper Lower88

1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards.

€ 27 .49*

Yamaha

Replacement Keys Yamaha GHD Keyboard

Key: Key A

Replacement Keys for Yamaha GHD KeyboardThese Keys fits for all Yamaha GHD keyboards.Note on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.Yamaha GHD keyboard is used in:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200This list of Yamaha Clavinova models is only a small selection. These keys were used in many models.Hanging Keys:In a series of these keyboards there was a problem with so-called hanging keys caused by the use of an unsuitable plastic grease.The key is clicked into the keyboard frame at the rear end. Yamaha originally used white grease here. This plastic grease has attacked the plastic of the key's. In the long run, this led to a material break at the back side of the key's (see photo 2).By this material break, the key is a bit wrong and thereby strikes the key next to it, dragging and is thus difficult (hangs). Instruments affected between May 2000 and January 2003 are affected.Today Yamaha uses a blue keyboard grease which is suitable for the plastic keys. If you still find this white grease in your keyboard, it is recommended to remove this grease and replace it with the blue one. For a keyboard should be 10 to 20 grams of grease.The Yamaha GHD keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €6.89*

€ 8 .89*

Yamaha

Yamaha GH3 Actuate Rubber

1 pcs. Yamaha GH3 Actuate RubberThis rubber fits in these keyboardsYamaha GHDYamaha GH3Yamaha NL2This rubber is used on every single key as stopperColor: black

€ 2 .08*

Yamaha

Yamaha Keyboard grease, blue 50g

Yamaha Spezial Keyboard grease, Blue 50gOriginal Yamaha plastic grease for Keyboards. Color is blue and will be delivered in a 50 gramm portion.Molycote G-1066YThis grease is used on YamahaOn GHD and GH3 keyboards on the fulcrum - Where the key engages the frame.For pedals at the mechanical moving parts.

€ 35 .50*

Yamaha

Replacement keys and parts for FS Keyboard

Key: Aftertouch 76

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition

Variants from €0.67*

€ 88 .99*

Yamaha

Yamaha NL2 Keyboard grease, white 50g

1 pcs. Yamaha Spezial Keyboard grease, white 50gMOLYKOTE G-1006YOriginal Yamaha plastic grease for NL2 Keyboards.Color is white and will be delivered in a 50 gramm portion.This grease can also be used on Yamaha GHD / GH3 keyboards at key guides.

€ 35 .50*

Yamaha

Yamaha Potentiometer for Pitch Bend

1 pcs. Rotary Potentiometer for pitch bend suitable forYamahaResistance: 10 KOhm

€ 13 .78*

Yamaha

Yamaha FSX Keyboard FFC cable 23 Pol 1,25

1 pcs Yamaha FSX Keyboard FFC cable 23 Pol 1,25Keyboard connection cableLength = 130 mmBoth sides have the same connector

€ 10 .89*

Yamaha

Yamaha GHD one octae white keys

One Octave white Replacement Keys for Yamaha GHD KeyboardThis set contains:1 x A1 x B1 x C1 x D1 x E1 x F1 x GNote on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.

€ 58 .49*

Yamaha

Contactrubber for Yamaha GHD Keyboard

Rubbercontact: 11 Contacts

1 pcs. new Contactrubber for Yamaha GHD KeyboardThis keyboard is used in these modells and others:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha CVP-207Yamaha CVP-209Yamaha CVP-401Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200Color of these Contactrubber may be different.

Variants from €9.52*

€ 13 .24*

ALPS

Yamaha Motif Volume Potentiometer

1 pcs. Slider with 45mm Travel. Suitable for Yamaha Motif ESYamaha Montage 6 Main VolumeYamaha Montage 7 Main VolumeYamaha Montage 8 Main VolumeThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 9 .90*

Yamaha

Hammer Yamaha GHD Keyboard

Hammer: Hammer Zone 1 black key

Replacement Hammer for Yamaha GHD Keyboard The Yamaha GHD Keyboard is used in two different configurations.The Keyboard is availabel with a 1 zone Hammeraction and with a 4 Zone Hammeraction.Here you will find the different Hammer for the GHD Keyboard

€ 9 .48*

Yamaha

Replacement keys, weighted for Yamaha FSX Keyboard

Auswahl Ersatzteil: Contactrubber 7P

Wheighted Key's suitable for Yamaha FSX KeyboardThis keyboard is used in these modells:Yamaha Motif XS6Yamaha Motif XS7Yamaha Tyros 2Yamaha Tyros 3Yamaha Tyros 4Color: whiteThis key is new

Variants from €3.20*

€ 11 .78*

Yamaha

Knob for Yamaha RM1X

1 pcs. Knob for encoder knobs inRM1XMotif XS RackRS7000Praktical tip:The knobs are just plugged on. No tools are needed.

€ 6 .75*

Synth-Parts

Yamaha Motif 6-7-8 new LCD Display black plug and play

1 pcs. Black LCD Display with LED Backlight replacementYamaha Motif 6Yamaha Motif 7Yamaha Motif 8We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character / Black BackgroundDelivery scope of LCD Display for Motif:Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha Motif 6,7 or 8 :To replace the display, the Yamaha Motif is opened from the back. So the rear body of the case has to be removed. Afterwards the Powersupply, the DM board and a sheet metal frame must be unscrewed. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife. Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.

€ 129 .00*

Panasonic

Yamaha Motif Volume Slide potentiometer

1 pcs. Volume Slide potentiometer with 30mm travel. Suitable forYamaha EX5Yamaha Motif 6Yamaha Motif 7Yamaha Motif 8Yamaha QS-300Yamaha W5Yamaha W7------- Out of Production --------Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 9 .98*

Panasonic

Yamaha Motif Slide potentiometer, CS1-CS4

1 pcs. Slide potentiometer with 30mm travel. Suitable forYamaha Motif 6 - CS1 - CS4Yamaha Motif 7 - CS1 - CS4Yamaha Motif 8 - CS1 - CS4 This part is no longer availabel from Yamaha.This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 9 .98*

Synth-Parts

D/A-Converter AK4396VF VSOP28 SMD housing

Digital-Analog-Converter AK4396VF for audio application from AKM (Asahi Kasehi) - compatible with AK4393VF Resolution: 24bitInterface: seriellCase: VSOP28Mechanical Description:The digital to analog converter is housed in a VSOP28 package and is designed for surface mounting on a circuit board. The D/A converter has 2 x 14 connecting pins with grid of 0.65 mm .Technical Description:This D/A converter was developed specifically for use in audio applications. The interface is serial and provides a 24 bit resolution.

€ 9 .52*

ALPS

Yamaha Motif CS1-4 and Volume 1 - 8 Potentiometer

1 pcs. Slider with 45mm Travel. Suitable for Yamaha Motif ES CS 1 - 4Yamaha Motif XS Volume 1 - 8The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 9 .90*

Yamaha

LCD Display Yamaha RM1X

1 pcs. new LCD Display suitable forYamaha Motif 6Yamaha Motif 7Yamaha Motif 8Yamaha RM1XYamaha RS7000This is only the LCD display without the backlight.The display is connected e.g. in the Yamaha RM1x by plugging the existing cable in the device onto the display. However, the display is supplied without the appropriate socket. Please note that you have to solder here.Original Yamaha spare part.The backlight is unfortunately no longer available.

€ 113 .17*

Yamaha

Yamaha FSX Stopper U 76

1 pcs. Yamaha FSX Stopper U 76This FSX keyboard is used in these modells and others:Yamaha Motif XS7

€ 11 .90*

Yamaha

Yamaha FSX Stopper U 61

1 pcs. Yamaha FSX Stopper U 61This FSX keyboard is used in these modells and others:Yamaha Motif XS6Yamaha Tyros 2Yamaha Tyros 3Yamaha Tyros 4

€ 9 .89*

Filter products

Yamaha Motif Serie