Korg T-Serie

ALPS

tactile switch 9,5 mm for Korg Synthesizer

1 pcs. tactile switch suitable for models KorgKorg 01W, 01WFD, 01RW, 01WProXKorg i2, i3, i4sKorg N264, N364Korg M1Korg T1, T21, T3Korg X2, X5Korg WavestationKorg 707 all expect 0 - 9Korg Part Number: 375010500 oder 375007500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 2 .69*

Synth-Parts

Cap rectangular for power switch

1 pcs. Cap rectangular for power switchPlease note the dimensions. The original caps used to be larger on many instruments. Dimensions: 12 x 7 mmHight: 10 mm

€ 2 .34*

ALPS

Value Slider 30mm Travel for Korg

1 pcs. Mono Slider with 30mm Travel. Suitable for Value Slider for KorgN1, N5, N5ex, N264, N36401W, 01WFDX2, X3, X5, X5dM1, M1r, M3rT1, T2, T3WS, WSEXKorg spare part No.: 365007800The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .45*

E-Switch

Single pole push switch, 250V/5A with solder lugs SDDLD10900

Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Yamaha

Replacement keys and parts for FS Keyboard

Taste: Aftertouch 76

1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition

Variants from €0.67*

€ 88 .99*

Synth-Parts

5 pcs. Contact Cleaning Stripes for electrical contacts

5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.

€ 11 .90*

Varta

CR2032

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Synth-Parts

LCD Display white with cable Kit for Korg T1,T2,T3

1 pcs. new LCD Display with LED Backlight replacement including cable Kit forKorg T1Korg T2Korg T3We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character / White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementPlease let us know your instrument. The cable must fit specifically to the instrument. Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation of LCD Display:The instrument must be disassembled almost completely to reach the display.Small soldering job: For the new display a jumper has to be soldered on the audio board.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Synth-Parts

Rotary Pot for LCD Contrast L=15 B10K

Rotary potentiometer for LCD Contrast adjustmentThis pot is for these models:M1, M1r, M3rT1, T2, T3WavestationKorg spare part No.: 360021200The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 4 .44*

Synth-Parts

Power cable 3 pol C13 Socket, 1.8 m

1 pcs. Power cabel with 3Pol C13-plug VDE testedCable: H05VV-G3G0,75mm²Length: 1,8 m

€ 6 .45*

Synth-Parts

Power cable 3 pol C13-plug, 3m

1 pcs. Power cabel 3m with 3P C13 plug

€ 9 .64*

ALPS

Korg T1, T2, T3 Volume Slide Potentiometer

1 pcs. Korg T1 Volume Slide PotentiometerKorg T1Korg T2Korg T3OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 11 .34*

Synth-Parts

LCD Display black with cable Kit for Korg T1,T2,T3

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forKorg T1Korg T2Korg T3We offer an absolutely equivalent display using modern LED technology for backlight.Small soldering job to do.Color: White Character / Black BackgroundDelivery scope of Display Set:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Please let us know your Instrument, so we can put on right cable length onto your Display.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation of LCD Display:The instrument must be disassembled almost completely to reach the display.Small soldering job: For the new display a jumper has to be soldered on the audio board.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Synth-Parts

Korg T1,T2,T3 new LCD Display yellow with cable Kit

1 pcs. LCD Display with LED Backlight replacement including cable Kit forKorg T1Korg T2Korg T3We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character / yellow BackgroundDelivery scope of LCD Display set:Display ready wiredMounting partsInstruction for replacementPlease let us know your instrument on order.The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation of LCD Display in Korg T1,T2,T3:The instrument must be disassembled almost completely to reach the display.Small soldering job: For the new display a jumper has to be soldered on the audio board.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Synth-Parts

D/A-Converter PCM54HP, DIP28

1 pcs. PCM54HP - Digital-Analog-Converter for audio application von Burr BrownThis part is used inKorg M1Korg T1Korg T2Korg T3 Resolution: 16bitInterface: parallelCase: DIP28warm-up time: 1 minMechanical Description:The digital to analog converter is housed in a DIP 28 package and is designed for classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 14 connecting pins with grid of 2.54 mm x 15.24 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is parallel and provides a 16 bit resolution. It is a symmetrical supply voltage of +- 5V to +- 12V needed.

€ 17 .85*

Synth-Parts

Rotary Pot for LCD Contrast L=20mm

Rotary potentiometer for LCD Contrast adjustment The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 4 .28*

Synth-Parts

Power cable 3 pol C13-plug, 2m

Power cabel 2m with 3P C13 plug

€ 7 .58*

Jalco

Korg triple female MIDI Socket for PCB, Jalco, YKF51-5046

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Korg These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*

Synth-Parts

Recapping Set PSU for Korg T1,T2,T3

Recapping set Power Supply for Korg T1The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.With an age of more than 30 years, the Korg T series is in any case one of the instruments in which an replacement of all electrolytic capacitors is strongly advised.Our recapping set is made up of Capacitors, which have been specially developed for use in audio applications. The manufacturer Nichicon is for us the manufacturer with a good quality at reasonable prices offers.This Recapping Set contains all necessary Capacitors for the power supply in the Korg T1.Warning PSU Recapping:Risk of electric shock: Switching power supplys store high voltage and high energy for a very long period of time.When working with these spare parts offered here, you are working directly in a 230VAC circuit.Observe polarity. Incorrect installation will cause explosion and fire.For experts only: Be aware of dangers of electric current

€ 19 .90*

Yamaha

Key contact board for FS Keyboard

Kontaktgummi: 12 Contacts

1 pcs. key contact board suitable FS keyboardsThis key contact is usedWidth: 6 cmheigh: 1,4 cmContact Resitance: lower 1 Ohm

€ 34 .00*

Yamaha

Replacement Keys and Parts for Yamaha A Keyboard

Taste: Hammer balck key

Replacement Keys and parts for Yamaha A KeyboardYamaha A keyboard is used inKorg 01/W ProXKorg T1Yamaha CLP-50Yamaha PF15Yamaha A Keyboard is a very old Keyboard with weighted keys.

Variants from €2.89*

€ 3 .49*

Synth-Parts

MOSFET FQP2N90 replacement for 2SK1199

1 pcs. Nch Power MOSFET FQP2N90 - Replacement for 2SK1199 Housing: TO220VDss: 900VId: 2.2APd: 85WTechnical hint:suitable replacement for PSU in Korg T1,T2,T3

€ 7 .45*

Filter products

Korg T-Serie