Skip to main content Skip to search Skip to main navigation

Filter products

Yamaha CLP-150

Yamaha

Average rating of 0 out of 5 stars

Yamaha GH3 NL2 Stopper Upper 88, felt
1 pcs. Yamaha GH3/NL2 Stopper U88 V8468201This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. Old spare part no is: VU34210R 

34 .89*
Panasonic

Average rating of 0 out of 5 stars

tactile switch 7 mm Yamaha
1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie    -  without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
0 .65*
Yamaha

Average rating of 0 out of 5 stars

Yamaha GH3 Stopper Lower88
1 pcs. Yamaha GH3/NL2 Stopper L88 - lower Felt V7640101This GH3 keyboard is used in these modells and others:Yamaha CLP-270This felt is also used in older Yamaha GHD keyboards. 

27 .49*
Yamaha

Average rating of 0 out of 5 stars

Replacement Keys Yamaha GHD Keyboard
Key: Key A
Replacement Keys for Yamaha GHD KeyboardThese Keys fits for all Yamaha GHD keyboards.Note on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key.Yamaha GHD keyboard is used in:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200This list of Yamaha Clavinova models is only a small selection. These keys were used in many models.Hanging Keys:In a series of these keyboards there was a problem with so-called hanging keys caused by the use of an unsuitable plastic grease.The key is clicked into the keyboard frame at the rear end. Yamaha originally used white grease here. This plastic grease has attacked the plastic of the key's. In the long run, this led to a material break at the back side of the key's (see photo 2).By this material break, the key is a bit wrong and thereby strikes the key next to it, dragging and is thus difficult (hangs). Instruments affected between May 2000 and January 2003 are affected.Today Yamaha uses a blue keyboard grease which is suitable for the plastic keys. If you still find this white grease in your keyboard, it is recommended to remove this grease and replace it with the blue one. For a keyboard should be 10 to 20 grams of grease.The Yamaha GHD keyboard is a velocity-sensitive keyboard, which comes in 2 versions.With a 4-zone hammer mechanism and a simple hammer mechanism in which all hammers are equally weighted.Mechanical construction:The base frame of the keyboard is made of plastic and is therefore very light. All other components are attached to this frame by screws or clamps.The white Keys have a size in cm of 2,2x21x4,2, the black Keys 2,2x19,2x5,9 cm.

Variants from €6.89*
8 .89*
Yamaha

Average rating of 0 out of 5 stars

Yamaha GH3 Actuate Rubber
1 pcs. Yamaha GH3 Actuate RubberThis rubber fits in these keyboardsYamaha GHDYamaha GH3Yamaha NL2This rubber is used on every single key as stopperColor: black 

2 .08*
Jalco

Average rating of 0 out of 5 stars

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

6 .88*
E-Switch

Average rating of 0 out of 5 stars

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

6 .95*
Yamaha

Average rating of 0 out of 5 stars

Yamaha Keyboard grease, blue 50g
Yamaha Spezial Keyboard grease, Blue 50gOriginal Yamaha plastic grease for Keyboards. Color is blue and will be delivered in a 50 gramm portion.Molycote G-1066YThis grease is used on YamahaOn GHD and GH3 keyboards on the fulcrum - Where the key engages the frame.For pedals at the mechanical moving parts. 

35 .50*
Yamaha

Average rating of 0 out of 5 stars

Yamaha pedal felt black for E-Piano
1 pcs. Yamaha pedal felt black for E-PianoThe felt is coated with adhesive film on one side. 

2 .94*
Jalco

Average rating of 0 out of 5 stars

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch
Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in  Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

5 .81*
Jalco

Average rating of 0 out of 5 stars

YKB21-5076 - Phone Jack 1/4- 6.3 mm PCB Mono
1 pcs. Phone Jack 1/4 inch - 6.3 mm, Mono witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5076HLJ-2305-01-3030These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

4 .25*
Yamaha

Average rating of 0 out of 5 stars

Yamaha NL2 Keyboard grease, white 50g
1 pcs. Yamaha Spezial Keyboard grease, white 50gMOLYKOTE G-1006YOriginal Yamaha plastic grease for NL2 Keyboards.Color is white and will be delivered in a 50 gramm portion.This grease can also be used on Yamaha GHD / GH3 keyboards at key guides.

35 .50*
Yamaha

Average rating of 0 out of 5 stars

Pedal Volume Potentiometer
1 pcs. Pedal Volume PotentiometerThis is a replacement Poterntiomter for Pedal from E-Piano if there is a Volume Pedal installed.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Pedal.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

14 .95*
Yamaha

Average rating of 0 out of 5 stars

Yamaha GHD one octae white keys
One Octave white Replacement Keys for Yamaha GHD KeyboardThis set contains:1 x A1 x B1 x C1 x D1 x E1 x F1 x GNote on the keys supplied - black rubber:The keys are normally supplied without the black rubber buffer that is attached to the lower end of the key. The black rubber must be taken from the old key. 

58 .49*
Synth-Parts

Average rating of 0 out of 5 stars

Power cable 2 pol for EU, 1.8m
1 pcs. Power cabel 1,8 m with 2P plug for Europe  

6 .89*
Yamaha

Average rating of 0 out of 5 stars

Contactrubber for Yamaha GHD Keyboard
Rubbercontact: 11 Contacts
1 pcs. new Contactrubber for Yamaha GHD KeyboardThis keyboard is used in these modells and others:Yamaha Clavinova CLP-120Yamaha Clavinova CLP-150Yamaha Clavinova CLP-220Yamaha Clavinova CLP-320Yamaha Clavinova CLP-880Yamaha Clavinova CLP-910Yamaha Clavinova CLP-930Yamaha Clavinova CLP-950Yamaha CVP-107Yamaha CVP-109Yamaha CVP-207Yamaha CVP-209Yamaha CVP-401Yamaha Motif 8 und Yamaha Motif ES8Yamaha P-80Yamaha P-120Yamaha P-200Color of these Contactrubber may be different.

Variants from €9.52*
13 .24*
Yamaha

Average rating of 0 out of 5 stars

Yamaha USB Socket Typ B PCB, YKF45-0021
1 pcs. Yamaha USB Socket Typ B PCBJalco used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

4 .49*
ALPS

Average rating of 0 out of 5 stars

Yamaha Potentiometer CLP-150 centerclick
1 pcs. Slidepotentiometer with center click suitable for Yamaha CLP-150Yamaha CLP-170The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

9 .45*
Synth-Parts

Average rating of 0 out of 5 stars

Flash Rom MBM29LV160BE90TN replacement equivalent
1 pcs. Flash ROM 16Mas replacement for MBM29LV160BE90TN Mechanical Description:This flash rom is housed in a TSOP48 package and is designed for SMD mounting on a circuit board. This part sensitive to static charge  

24 .49*
Yamaha

Average rating of 0 out of 5 stars

Yamaha Pedal screw long
1 pcs. Yamaha Pedal screwDimensions: M6 x 57 mmNote:At 38 mm, this pedal support bolt has a longer thread than the one under item numberSCYA-WF054500

9 .45*
Yamaha

Average rating of 0 out of 5 stars

Hammer Yamaha GHD Keyboard
Hammer: Hammer Zone 1 black key
Replacement Hammer for Yamaha GHD Keyboard The Yamaha GHD Keyboard is used in two different configurations.The Keyboard is availabel with a 1 zone Hammeraction and with a 4 Zone Hammeraction.Here you will find the different Hammer for the GHD Keyboard

9 .48*
Yamaha

Average rating of 0 out of 5 stars

Stereo rotary potentiometer 14mm for Yamaha
1 pcs. Replacement stereo rotary potentiometer 14mm suitable forYamaha CLP-150Yamaha P-250Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. The axis rises with 13 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

6 .55*
Yamaha

Average rating of 0 out of 5 stars

Yamaha CLP-150 Mainboard DM tested with 1 year warranty
1 pcs. Mainboard for Yamaha CLP-150 E-PianosThese Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard. 

264 .97*
Yamaha

Average rating of 0 out of 5 stars

Yamaha Pedal PCB X0193 for E-Pianos V7675600
1 piece Yamaha Pedal PCB X0193 for E-Pianos V7675600This PCB for Yamaha pedal unit is used in pedals in which three potentiometers are installed.For final use, parts on the board still have to be broken off. The break edges are marked and perforated accordingly. This can be done easily and without tools. 

27 .89*

Yamaha CLP-150 repairs and spare parts


The Yamaha CLP-150 is an electric piano that was launched by Yamaha in 2002. The Yamaha CLP-150 was available in three variants with the model names Yamaha CLP-150, Yamaha CLP-150M and the variant Yamaha CLP-150C. As a rule, these variants are only different colors or veneers.

This series also includes the Yamaha CLP-170 with a better equipment and the Yamaha PF-500 as a variant in Stage Piano execution.

Yamaha CLP-150 repairs

for the Yamaha CLP-150 there are two main known age-related faults.


Yamaha CLP-150 with sticky keys.

The Yamaha CLP-150 has a Yamaha GHD keyboard with 4 zone hammer action. At the start of production of the Yamaha CLP-150 model in 2002, a grease was used in this keyboard that attacks the plastic of the keys in the long term. This causes the keys to stick in the keyboard. The keys with attacked plastic are slightly skewed and thus stuck.

This error "sticky keys on a Yamaha electric piano" affects the Yamaha CLP-150 that are within this serial number range:

1001 - ALL

Yamaha CLP-150: Serial number: 601001 - 608792

Yamaha CLP-150M Serial number: 601001 - 605626

Yamaha CLP-150C Serial Number: 601001 – 604968

 

If your Yamaha CLP-150 is within this serial number range, it is possible to replace the entire keyboard. With this solution you have solved the problem safely and for a long time.


Yamaha CLP-150 boot up error.

With the Yamaha CLP-150 it can happen that the electric piano shows the start up screen in the display after switching on and hangs in this state. It is then not possible to make music with the electric piano.


My Yamaha CLP-150 shows only the start screen.

 

In this error case, there are two possible error causes according to our knowledge so far. Both error causes are on the mainboard of the Yamaha CLP-150. At Yamaha these boards are usually called DM Board.

We can repair these errors. Please feel free to contact us. Since we have this model in our workshop it is sufficient if you send us the mainboard from your Yamaha CLP-150. We can then test and repair the DM board in our test electric piano.

Yamaha CLP-150 Spare Parts

we offer various spare parts for the Yamaha CLP-150. In our online store you can order spare parts online such as keys for the keyboard. We can also get a whole keyboard for you. Do you need a set of new contact rubbers for the keyboard? We usually have the contact rubbers in stock and ready for shipping.

 

Yamaha CLP-150 with banging sounds.

 

If your Yamaha CLP-150 has errors in the velocity, then this is in most cases because the contact rubber in the keyboard is worn out. These contact rubbers can be replaced with manageable effort.