Yamaha RM1X

Panasonic

tactile switch 9,5 mm Yamaha

tactile switch suitable for Yamaha ModellsRS7000 (REC/Play/Stop/<)RM1X (Control Buttons without Keyboard)Motif 6, Motif 7,Motif 8 (switch without LED)Motif XS, Motif ES (switch without LED)Yamaha Part Number: VZ085500The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

ALPS

tactile switch 5 mm Yamaha RM1x - discontinued -

1 pcs tactile switch suitableYamaha RM1XYamaha MX100II disklavierThese switch is for Keyboard ButtonsYamaha Part Number: VS1809800The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 1 .25*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

Synth-Parts

LED 3 mm Red

1 piece LED 3 mm Red The LED are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .99*

Synth-Parts

LED 3 mm Green

1 piece LED 3 mm Green The LED are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 0 .99*

Synth-Parts

Potentiometer for Yamaha rm1x with center Tap 12mm

1 pcs. Rotary Potentiometer vertikal 12 mm with center TapCenter Tap function: no deviation in center positionYamaha RM1x Utility Mounting instruction Yamaha RM1x:The potentiometer with thread I offer here can also be used in the RM1x. The great advantage of this solution is that I think potentiometers with threads will have much longer lifetime than potentiometers without threads. Indisputably, the axis is guided and stored much more stably by the thread.n the pictures you see a test installation I have made.Electrical properties:The nominal resistance has 10 kOhm (Kilo-Ohm), the electric resistance gradient runs linear.Appearance (technical characterisation):The casing measures 12 mm bright, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has TAP function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

From

€ 4 .70*

Taiwan Alpha Electronic Co., LTD.

Encoder 16 mm for Yamaha

Encoder 16 mm widht suitable forYamaha RM1XYamaha RS-7000Practical advice:The thread of this encoder is 2 mm longer than the thread of the original encoders. Depending on the space in the housing, it can tighten a bit when reassembling. These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 5 .63*

Synth-Parts

Yamaha RM1x new LCD Display black plug and play

1 pcs. Black LCD Display with LED Backlight replacementYamaha RM1xWe offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character / Black BackgroundDelivery scope of LCD Display for RM1x:Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha RM1x :To replace the display, the Yamaha RM1x is opened from the back. So the rear half of the case has to be removed. Afterwards the floppy drive, the DM board and a sheet metal frame must be unscrewed. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife. Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters. Note on contrast adjustment:It may be necessary to replace 2 SMD capacitors on the main board. Due to the ageing of the capacitors, the setting range for the contrast has shifted.

€ 129 .00*

Synth-Parts

Replacement Set tactile Switch for Yamaha RM1x complete

Complet replacement set tactile switch for Yamaha RM1xconsist of:45 pcs 9,5 mm hight27 pcs Keypad switchOperational Life for all switch: 1.000.000 CyclesThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 39 .00*

Varta

CR2450

1 pcs. CR2450Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 24.7 mm and a thickness of 5mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .88*

Yamaha

Knob for Yamaha RM1X

1 pcs. Knob for encoder knobs inRM1XMotif XS RackRS7000Praktical tip:The knobs are just plugged on. No tools are needed.

€ 6 .75*

Synth-Parts

Replacement stereo rotary potentiometer 14mm

1 pcs. Replacement stereo rotary potentiometer 14mm widht for Volume, suitable forYamaha RS-7000Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 5 .89*

Synth-Parts

Powersupply external 12V like Yamaha PA-150A

1 pcs external Class A Power Supply Unit equivalent to Yamaha PA-150ANo original Yamaha spare part!The advantages of this external power adapter for Yamaha Epianos or workstations are brand manufacturers low residual ripple Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 5.5 mm outside diameter. Electrical properties:Secondary voltage: 12VDCCurrent: 2ACE / GS testedPractical advice:Plug of the device. Don't work under Voltage.

€ 28 .56*

Jalco

Yamaha triple female MIDI Socket for PCB, Jalco, YKF51-5046

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees. used by:YamahaThese part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 10 .89*

Synth-Parts

Yamaha RM1x complete Set Potentiometer, Encoder

Complet replacement set potentiometer for Yamaha RM1xconsist of:8 pcs rotary poti, vertikal, 12mm, Center click + TAP4 pcs Encoder, 16mm1 pcs Stereo Volume rotary pot, 14mmOperational Life for all pot's: 15.000 CyclesOperational Life for all Encoder: 50.000 CyclesMounting instruction Yamaha RM1x:in the RM1x Yamaha has installed a potentiometer without thread. The potentiometer I offer here can also be used in the RM1x. However, the housing holes must be drilled out by 1 to 2 mm and the axis must be shortened by 5 mm. The big advantage of this solution is that I think that threaded potentiometers are much more durable than unthreaded potentiometers. Undeniably, the axis is guided and supported by the thread much more stable.In the pictures you see a test installation I have made.The pot's are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 51 .17*

Yamaha

LCD Display Yamaha RM1X

1 pcs. new LCD Display suitable forYamaha Motif 6Yamaha Motif 7Yamaha Motif 8Yamaha RM1XYamaha RS7000This is only the LCD display without the backlight.The display is connected e.g. in the Yamaha RM1x by plugging the existing cable in the device onto the display. However, the display is supplied without the appropriate socket. Please note that you have to solder here.Original Yamaha spare part.The backlight is unfortunately no longer available.

€ 113 .17*

Yamaha

Yamaha Display Beezel WB21630R

1 pcs. Yamaha Display Beezel WB21630RThe display of the instrument is screwed into this frame. The frame is then installed in the housing.

€ 28 .49*

Yamaha

IC MASK LHMN5UXX V1.01 RM1X

1 pcs. IC MASK LHMN5UXX V1.01 RM1XSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

€ 37 .00*

Yamaha RM1x Groovebox

When it brought out its R-series a good two decades ago, Japanese technology corporation Yamaha set down a true milestone: the perfect instrument for dance and electronica producers. A versatile workstation, the device offered pioneering ways of creating complete tracks without using other instruments, and was the first step towards success for many a DJ. The rm1x was one of the most important models in the R-series, and is still popular in today’s age of powerful laptops and software. From potentiometers to tactile switches, producers are often on the lookout for various spare parts for the model – available in this category at an attractive price. Here, you will find a wide range of classic wearing parts that will restore your Yamaha instrument to its original high quality, once again placing all its options for composing and playing back dance tracks at your fingertips.

Order spare parts for the RM1x at low prices online

Thanks to its large display and wide range of connection options for headphones and audio cables, this R-series model was an essential piece of kit for many studios at the turn of the century. Its talents as a rhythm box also made it the constant companion of many dancefloor DJs, though its switches and dials often suffered a lot of wear as a result. Our online store is your one-stop shop for spare tactile switches, potentiometers and other technical equipment for Yamaha tools. We also stock a wide range of spare parts for other Yamaha music products, which will allow you to enjoy them for years to come. If you need spare parts for your Yamaha E-piano or keyboard, for instance, just head to the corresponding section of our site.

Filter products

Yamaha RM1X

Yamaha RM1x Groovebox

Order spare parts for the RM1x at low prices online