MPC 2500

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

ALPS

tactile switch 5 mm for AKAI

1 piece tactile switch suitable for modelsAKAI MPC-500AKAI MPC-1000AKAI MPC-2000AKAI MPC-2500AKAI MPC-4000Akai Part Number: ES-349474 und ES-411687NThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Synth-Parts

Akai MPC 2000XL Slidepotentiometer

1 pcs. Slidepotentiometer suitable for Akai MPC-2000 NOTE-VARIATIONAkai MPC-2000XL NOTE-VARIATIONAkai MPC-2500 Q-LINK Q1 und Q2Akai MPC-4000 Q-LINK Q5 und Q6Akai MPC-5000 Q-LINK Q1, Q2, Q3 und Q4The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 12 .90*

Synth-Parts

tactile switch 12 mm for AKAI MPC

1 piece Tactile switch 12 mm suitable for models AKAI MPC-1000AKAI MPC-2000AKAI MPC-2500AKAI MPC-4000These switch is used for REC,PLAY,STOP,TAP (6 pcs)Part Number: : ES-415015JThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

€ 1 .79*

Synth-Parts

MPC-2500 full Set tactile switch Akai

Complete Set tactile switch suitable for AKAI MPC-2500Part Number: : ES-415015J and ES-349474The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

€ 27 .49*

Synth-Parts

AKAI MPC-2500 LCD Display white with cable Kit

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and white backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.The color of the shown display on picture, may differ from the original.Color: Black Character / white BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel. Installation service:We are also happy to install the display for you. Please ask.

€ 99 .00*

Synth-Parts

AKAI MPC-2500 LCD Display blue with cable Kit

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with white letters and blue backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.Unfortunately, we cannot offer the complete instrument, but only a new LCD display.The color of the shown display on picture, may differ from the original.Color: White Character / blue BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel. Installation service:We are also happy to install the display for you. Please ask.

€ 99 .00*

Synth-Parts

AKAI MPC-2500 LCD Display yellow with cable Kit

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and yellow-green backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.The color of the shown display on picture, may differ from the original.Color: Black Character / yellow BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the Stop key and turning the data wheel. Installation service:We are also happy to install the display for you. Please ask.

€ 99 .00*

Synth-Parts

AKAI MPC-2500 LCD Display black with cable Kit

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with white letters and black BacklightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500. The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.Unfortunately, we cannot offer the complete instrument, but only a new LCD display.The color of the shown display on picture, may differ from the original.Color: White Character / black BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the Stop key and turning the data wheel. Installation service:We are also happy to install the display for you. Please ask.

€ 99 .00*

AKAI Stereo rotary potentiometer 14mm with thread

1 pcs. AKAI Stereo rotary potentiometer 14mm with threadAKAI MPC-2500 - MAster Volume, Q3, Q4AKAI MPC-5000Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 7 mm lengt. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 12 .50*

AKAI-MPC 2500

The first unit in the MPC series to incorporate the "Chop-Shop" and "Grid-Edit" functions into the MPC's official firmware.
The unit, which has been available since 2005, can also be operated with an alternative software called "JJ OS", which extends the range of functions of the MPC 2500, the MPC2500LE, and the MPC2500SE.
There was a special edition of this unit with a CD burner and a blue display. However, the distribution of this version has already been discontinued, which is why this special edition of the MPC2500 has become a rarity.

As with all older MPC2500s, the function keys can malfunction. This is due to the fact that the buttons are only designed for a life cycle of about 5000-10000 operations. Over time, these buttons show the behaviour known as "bouncing": The function is not triggered, or even triggered several times, even though the push-button has only been pressed once.

Repair

The buttons, the knobs, the sliders and the display of the MPC 2500 can of course be replaced if they fail after a few years. The repair or replacement of the defective components can be carried out in our specialist workshop at a reasonable price by appointment.
Make an appointment for the repair of your AKAI MPC 2500.

Filter products

MPC 2500

AKAI-MPC 2500

Repair