Roland A-Serie

Panasonic

tactile switch 5 mm for Roland

1 pcs. tactile switch suitable for models RolandFP1, FP2, FP3, FP4, FP5, FP6, FP7, FP8, FP-50JV25, JV30, JV35, JV50, JV80, JV90, JV880, JV1080JP8000JD800 - Cursor ButtonsMC-303, MC-307RD-500XP10, XP50, XP60, XP80XV3080U20Fantom X6,X7,X8 without REC/PLAY/STOPOnly for non-illuminated buttons:A90, A90-EXXP30JV1000JP8080RD-600,RD-700Roland Part Number: 13169697 or 13169752The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

ALPS

tactile switch for Roland JD800 Discontinued

1 pcs tactile switch suitable for Roland JD800These switch is for User ButtonsRoland Part Number: 13169727The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 1 .96*

Roland

Replacement parts for Roland PA4 and PA4A Keyboard

Ersatzteile Tastatur: Fulcrum 12P

Spare parts for Roland PA4 and PA4AKeyboardHere you will find different parts for Progressive Hammer Action Keyboard from Roland. These PA4 Keyboard was build by Roalnd in two different Versions. There exists a PA4 and a PA4A Version. The Parts i offer here fits for both Versions. Cusion, FeltHammerKey GuidePrice is valid for one spare part. Lower Cusion for Hammer in a Roalnd PA4 or Pa4A Keyboard (PArt-No: TTROPA4-ZU-FLTHA1)This Cussion is needed to stop hammer when falling down.Roland use here a material based on two different components.One side is self-adhesive.For a complette Keyboard wit 88 Keys you will need 2 of these cusionTTROPA4-ZU-FLTHA1.For all other Felt and Cusions you will need one part for a complete Keyboard.Please have a look at the video for replacing Hammers.

Variants from €1.49*

€ 17 .90*

ALPS

tactile switch 5 mm for Roland

tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Synth-Parts

Power cable 2 pol for EU, 1.8m

1 pcs. Power cabel 1,8 m with 2P plug for Europe

€ 6 .89*

Synth-Parts

Roland A-80 A-50 new LCD Display blue

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit for Roland A-50Roland A-80We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character / Blue BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

NKK Switches

Single pole rocker switch 250V/6A with solder lugs

Single pole rocker switch with solder lugs suitable for modelsRoland6A / 250VACTermination Solder Lug1 poleMounting hole: 19,8 x 12,8 mmDimensions outside: 20,8 x 14,8 mmVDE-tested Mechanical Description:The switch housing consists of polycarbonate. The switch is provided for a snap-in mounting in a housing and having corresponding spring lips on the narrow side of the housing. Housing cutout for installation should be 19.30 mm x 12.90 mm. The switch itself has a width of 12.90 mm, a length of 18.50 mm and a height of 13.60 mm plus 3 mm height of the rocker. The outside dimensions are 20.8 mm x 14.8 mm.Electrical properties:The electrical components are made of copper with a silver or tin plating and electrical connection is made with solder lugs for cable assembly. The length of the terminals is 2.9 mm with a width of 3 mm.The electrical load is 6 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 4 .76*

Varta

CR2032

1 pcs. CR2032Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Manufacturer: Panasonic or Varta Information for handling old Battery's

€ 3 .19*

Synth-Parts

Roland A-80 A-50 new LCD Display black

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forRoland A-50Roland A-80 We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character / black BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Panasonic

tactile switch 5 mm for Roland

1 pcs. tactile switch suitable for modelsRoland MC-505Roland MC-808Roland MC-909Roland Part Number: 1343478The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

€ 0 .71*

Synth-Parts

Roland A-80 A-50 new LCD Display white

Blue LCD Display with LED Backlight replacement including cable Kit forRoland A-50Roland A-80We offer an absolutely equivalent display using modern LED technology for backlight.Color: black Character / white BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Roland

Replacement Keys for Roland PA4A Keyboard

Taste: Key A

Spare parts for Roland PA4A KeyboardDoes a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken. This part fits for all Roland PA4A Keyboards Roland PA4A Keyboard is used in Roland A90 and A90exRoland FP-1 and FP-8 and FP-9Roland HP-145 and HP-147Roland HP-236 and HP-237 and HP-245Roland HP-2800 and HP-2880Roland HP-330 and HP-335 Roland HP-3800Roland HP-530 and HP-535 and HP-550 and HP-555Roland HP-5700Roland HP-730Roland RD600Roland XV-88 The S-Key fits in Keyboard PA4 AND PA4A. You can find it here: TTROPA4-KBLPlease have a look at the video for replacing Hammers.

Variants from €9.53*

€ 9 .98*

Roland

Roland PA4 contactrubber for Keyboard

1 pc. Contact rubber for Roland PA4 keyboardFeatures: Height of contacts: 9 mm width of the strip: 32 mm Length of the strip: 165 mm Number of contacts per strip: 12 contactsRoland spare part number: 22185247This contactrubber fits in Roland PA4 and also Roland PA4A Keyboard.One contact strip consists of 12 contacts and thus covers one octave. For a complete replacement of the contact strips in a keyboard with 88 keys, 7 contact strips + 4 contacts are needed. The remaining 4 contacts can easily be separated from a contact strip with 12 contacts. For this purpose, a notch is provided in the contact strip after every 4 contacts.

€ 11 .90*

Simply order spare parts for Roland A-80 online

Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. In our shop we offer you Roalnd Fantom spare parts products, which continue the brand quality after the replacement in the usual way. These include synthesizer replacement parts and key replacement parts, but also Fantom encoders, PCB mount phone jacks or LCD display for Roland A-80. One thing all Roland spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the Fantom replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which Roland A-80 probe to buy or what type of Replacement Parts or replacement key are right for the models you use. We are happy to help!

Do not compromise on quality

A system is only as powerful as its smallest component. For you, this means that Roland brand-quality replacement parts that you know from the manufacturer should also be purchased and installed. This applies to Roland A-80 encoders as well as the Roland Fantom LCD display or any other Fantom replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an Roland A-80 encoder or an Roland Fantom tact switch, you have the same professional quality as buying a complete device. For all questions we are gladly there for you. Phone jack socket for PCB? Replacement keys? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.

Filter products

Roland A-Serie

Simply order spare parts for Roland A-80 online

Do not compromise on quality