Skip to main content Skip to search Skip to main navigation

Filter products

Yamaha CLP-990

Panasonic

Average rating of 0 out of 5 stars

tactile switch 7 mm Yamaha
1 pcs. tactile switch suitable for Yamaha MotifOn Yamaha Motif modells these switch is for lightning buttons.These switch is also suitable forYamaha PSR9000Yamaha Tyros serie    -  without LCD BoardYamaha Part Number: VV439800,WG31840R, VQ371700The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
0 .65*
Jalco

Average rating of 0 out of 5 stars

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

6 .88*
Yamaha

Average rating of 0 out of 5 stars

Yamaha Pedalcable No3
1 pcs. Yamaha Pedalcable No3This cable with plug is used by Yamaha for different E-Piano Modells. This Cable fits for Pedal with 3 Pedals.This cabel is for 6 Pol Mini Din Plug. All 6 wires are assigned on both sides.This cable is used in:Yamaha CLP-745Yamaha CLP-810SYamaha CLP-840Yamaha CLP-860Yamaha CLP-990Old Manufacturer Number: V0044700

22 .90*
Yamaha

Average rating of 0 out of 5 stars

Yamaha pedal felt black for E-Piano
1 pcs. Yamaha pedal felt black for E-PianoThe felt is coated with adhesive film on one side. 

2 .94*
Jalco

Average rating of 0 out of 5 stars

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch
Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in  Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

5 .81*
Yamaha

Average rating of 0 out of 5 stars

Pedal Volume Potentiometer
1 pcs. Pedal Volume PotentiometerThis is a replacement Poterntiomter for Pedal from E-Piano if there is a Volume Pedal installed.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Pedal.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

14 .95*
ALPS

Average rating of 0 out of 5 stars

Yamaha Stereo Potentiometer CLP-120
1 pcs. Slidepotentiometer. Suitable for Volume Slider inYamaha CLP-120Yamaha CLP-430Yamaha CLP-920Yamaha CLP-990Yamaha P-105Yamaha P-120 The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required. 

9 .45*
Synth-Parts

Average rating of 0 out of 5 stars

Piano felt for Yamaha Sliptape replacement
1 pcs. Piano felt as alternative to Yamaha sliptapeOur alternative for the sliptape used by Yamaha for wooden keys.Piano felt, an old and proven product from the piano industry. This piano felt is used by every piano builder exactly at the places where mechanical load capacity is important. There where a lever movement is converted into a rotary movement and mechanical parts should slide over each other as noiselessly as possible.In the Yamaha digital pianos in which wooden keys are used is exactly such a mechanical load given ngeb ndie from Yamaha with a so-called Sliptape is padded. This piano felt here is best suited to replace the Yamaha sliptape.What else you need:1 cutter knifePonal expressAlcohol for cleaningPolishing paste

36 .00*
Yamaha

Average rating of 0 out of 5 stars

Yamaha contactrubber Wood key 12 contacts
1 pcs Yamaha contactrubber Wood key 12 contactsIn this wooden keyboard installed by Yamaha only in very few models, a contact rubber was used in two places.Once there is a contact rubber in the front under the wooden keys. A second Kontaktugmmi sits in the back under the hammers.Here it is the contact rubber at the front under the keys. No more rubbers available.Contactrubber for one actave with 12 contacts.Only some few parts availableThis rubber was used inYamaha CLP-175Yamaha CLP-990Yamaha CVP-900

20 .99*

Yamaha Clavinova CLP-990 spare parts easy to buy online

The Yamaha Clavinova CLP-990 digitalpiano is a digital piano designed for professional use by professional and amateur musicians. If an electric piano from Yamaha is used a lot then the individual components of the Yamaha CLP-990 electric piano are subject to wear. Anyone who likes to play a lot on his Yamaha Clavinova CLP-990 e-piano will need a key from the keyboard as a spare part at some point. But also the contact rubber or the sensorboard in the keyboard of the Yamaha CLP-990 e-piano may need to be replaced by a new component. During frequent use of headphone of the Clavinova e-piano the phone jack are stressed hard. Also power supply or the power cord are parts that can be damaged over time. If after many years of trouble-free music making you can hear crackling and popping in the speaker, then most likely the volume control is defective. With us you can easily buy a new potentiometer for your Yamaha CLP-990 Digital Piano.



We supply spare parts for Yamaha Clavinoava CLP-990 electric piano worldwide.

We are your reliable supplier for spare parts of your Yamaha Clavinova CLP-990 electric piano. We offer our spare parts like phone jack socket, tact switch or volume potetniometer in our online store. We also have the matching potentiometer usually permanently in stock. Original Yamaha spare parts like contact rubber, key and sensorboard we also have in our assortment. Spare parts we have partly also in OEM quality for the Yamaha Clavinova CLP-990 electric piano in stock. For us OEM quality means that we get spare parts such as tact switch, potentiometer or phone jack directly from the same supplier from which Yamaha buys the components. Our original Yamaha spare parts like sliptape, contact rubber or sensorboard are usually shipped with Deutsche Post or DHL. If the delivery of your needed spare part for the Yamaha Clavinova CLP-990 E-Piano is especially urgent, please contact us. We can also organize an express delivery with UPS.