Yamaha PSR-S900

Jalco

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .49*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

E-Switch

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900

1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Yamaha

Contactrubber 16M CT2M for Yamaha

Rubbercontact: 12 Contacts

1 pcs. Contactrubber 16M CT2M suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-270Yamaha PSR-340Yamaha PSR-640Yamaha PSR-740Yamaha PSR-S700Yamaha PSR-S710Yamaha PSR-S750Yamaha PSR-S770Yamaha PSR-S900Yamaha PSR-S910Yamaha PSR-S950Yamaha PSR-S970Yamaha PSR-1500Yamaha PSR-2000Yamaha PSR-3000These Contactrubber was buildt in two different colors. Function is in both cases the same.

Variants from €9.90*

€ 11 .90*

Jalco

Phone Jack 1/4 - 6.3 mm PCB Stereo with switch

Phone Jack 1/4- 6.3 mm, Stereo with switch, for printed circuit used in Korg, Roland or Yamaha InstrumentsThis part is used inKorg OasysRoland Juno GYamaha Tyros 2 Technical descriptionThe offered phone jack for PCB mounting is a stereo jack with switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 5 .81*

Yamaha

DC Power Jack 3 mm with solder pins, Yamaha

DC Power Jack with solder Pins for PCB mounting suitable for modelsYamaha PSR-S950Yamaha P-155technical Dates:Termination Solder PinMechanical Description:The housing of the Power Jack is made of Plastic and the jack is provided for P.C.B. mounting. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder pins.The electrical load is 2 A at 24 VDC.Practical advice:Plug of the device. Don't work under Voltage.Knowledge in soldering is required for switch replacement.

€ 4 .94*

Yamaha

Yamaha USB Socket Typ A PCB, YKF45-0021

1 pcs. Yamaha USB Socket Typ A PCBJalco YKF45-0021used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 4 .49*

Yamaha

Replacement keys 16L for Yamaha

Key: Taste schwarze Octave

Key's 16L Style suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-340Yamaha PSR-450Yamaha PSR-710Yamaha PSR-750Yamaha PSR-910Yamaha PSR-950Yamaha PSR-1500Yamaha PSR-3000Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

Variants from €9.90*

€ 12 .50*

Yamaha

Yamaha USB Socket Typ B PCB, YKF45-0021

1 pcs. Yamaha USB Socket Typ B PCBJalco used by: Yamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

€ 4 .49*

Yamaha

Yamaha Replacement stereo rotary potentiometer 14mm

stereo rotary potentiometer for Volume, suitable forYamaha PSR-330 und 340PSR-530 bis 550PSR-630 und 640PSR-730 und 740PSR-1000, 1100, 1500PSR-2000, 2100, 3000PSR-S700 und S710PSR-S900 und S910CVP-207Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 5 mm long. The axis rises with 13 mm length. The axis has a diameter of 6 mm and is flattened on a length of 6mm. It is made of black plastic. Its head has a slot and ends in corner radius.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 1 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 5 .77*

Yamaha

Yamaha P-155 Round Knob black for Stage Piano

1 pcs. Yamaha Round KnobYamaha DGX-500Yamaha DGX-530Yamaha P-155Yamaha PSR-S700Yamaha PSR-S710Yamaha PSR-S900Yamaha PSR-S910 Technical Description of Yamaha Knob:This Round knob will be put on rotary potentiometer on your Yamaha Stage Pianos

€ 6 .38*

Yamaha

Yamaha PA-300C Power Supply Unit

1 pcs external Power Supply Unit Yamaha PA-300C Mechanical Description:The primary plug is designed for Europe and the plug on the secondary side is round with 6.5 mm outside diameter.Electrical properties:Practical advice:Plug of the device. Don't work under Voltage.

€ 69 .00*

Yamaha

Yamaha Tyros Encoder 16 mm footprint

1 pcs. Encoder 16 mm widht suitable forYamaha Tyros 1Yamaha Tyros 2Yamaha CVP-207Yamaha CVP-209 Part numbers:Yamaha VU48130R REB161-PVB

€ 8 .45*

Yamaha

Yamaha Keyboard grease, 50g

1 pcs. Yamaha Spezial Keyboard grease, 50gOriginal Yamaha plastic grease for Keyboards. Yamaha now also uses the blue key grease like in the GHD keyboards at this point.Grease will be delivered in a 50 gramm tube.This grease is used on Yamaha PSR Series. The original grease was probably a white grease.

€ 35 .50*

Synth-Parts

CCFL neon lamp 100 x 2,2 mm for LCD Display Backlight

1 pcs. CCFL neon lamp 100 x 2,2 mm with cape for LCD Display BacklightYamaha PSR-S700Yamaha PSR-S900Safety advice to CCFL tubes:These neon tubes are very sensitive. Handling and mounting must be done very very carefully.The fluorescent tubes are operated with a high voltage of approx. 180V AC. Please observe the corresponding safety regulations of the VDE.

€ 43 .49*

Yamaha

Stereo rotary potentiometer 14mm for Yamaha

1 pcs. Replacement stereo rotary potentiometer 14mm suitable forYamaha PSR-S900Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 6 .55*

Synth-Parts

FFC cable 20 Pol Pitch 1,00 L=110 mm

1 pcs. FFC cable 20 Pol Pitch 1,00 L=110 mm

€ 9 .25*

Yamaha PSR-S900 without function

You want to turn on your Yamaha PSR-S900, but nothing happens? The instrument stays dark? If you can rule out that the power supply is defective, then it is most likely PCB for the power supply. We can fix this. Unfortunately we need the whole instrument for this repair.

Simply order spare parts for Yamaha PSR-S900 online

Synthesizers and samplers are devices that are exposed to continuous loads and must also withstand them reliably. This applies to private needs, as well as for professional use. If the smallest components do not work, the entire system can not deliver the desired first-class sound. In our shop we offer you Yamaha PSR-S900 spare parts products, which continue the brand quality after the replacement in the usual way. These include synthesizer replacement parts and key replacement parts, but also PSR-S900 encoders, PCB mount phone jacks or LCD display for Yamaha PSR-S900. One thing all Yamaha spare parts have in common in our shop: they convince in material and quality of execution. We know that when musicians hit the peg or technicians do their job, there is no time for long failures. Therefore, the PSR-S900 replacement parts are optimally compatible and can be easily and, above all, swiftly and easily emptied. The gig or rehearsal can then continue immediately. Just call or email us if you're not sure which Yamaha PSR-S900 probe to buy or what type of Replacement Parts or replacement key are right for the models you use. We are happy to help!

Do not compromise on quality

A system is only as powerful as its smallest component. For you, this means that Yamaha brand-quality replacement parts that you know from the manufacturer should also be purchased and installed. This applies to Yamaha PSR-S900 encoders as well as the Yamaha PSR-S900 LCD display or any other PSR-S900 replacement parts. Anyone who compromises here makes a big mistake. Professionalism you need on stage is also essential for replacement parts. Whether you want to buy an Yamaha PSR-S900 encoder or an Yamaha PSR-S900 tact switch, you have the same professional quality as buying a complete device. For all questions we are gladly there for you. Phone jack socket for PCB? Replacement keys? No matter what you need: We will advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your high-performance partner for the installation of spare parts.

Filter products

Yamaha PSR-S900

Yamaha PSR-S900 without function

Simply order spare parts for Yamaha PSR-S900 online

Do not compromise on quality