Roland MKS-10

1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ-0520-01-010HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125  Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Xvive MN3007 1024 Stage BBD DIP8  -  Panasonic MN3007 cloneRebuild of the MN3007 BBD from Panasonic. We think that it is a 1:1 clone from original Panasonic Chip. Features of MN3007Variable delay time from 5.12ms to 51.2msWide dynamic range 80dB (typ)Total harmonic distortion <0.5%Clock frequency from 10Hz to 100KHz Package: DIP-8 Mechanical Description of MN3007:The IC is housed in a DIP 8 package and is designed for trughhole mounting on a circuit board. THis chip is pin compatible to Panasonic MN3007.ICs are sensitive to static charge! Handle with care. Semiconductors are excluded from exchange.   

Power cabel 2m with 2P plug for Roland InstrumentsVDE testedCable: H05VV-F2G0,75mm²Socket: C10Mains plug CEE 7/7 earth contactLength: 2 mAlso forKorgAkai 

1 pcs. IC Socket DIP 16 Gold for ICTechnical Hint:Mounting of this part requiers soldering.  

1 pcs. Alfa Rpar AS3109 VCF IC DIP16 replacement for Roland IR3109The IC Alfa Rpar AS3109 is a voltage-controlled filter module that was used in analogue synthesizers in the 1980s. The AS3109 is pin-compatible with the Roland IR3109. Mechanical Description of AS3109:This AS3109 is housed in a DIP 16 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The IC has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm.Technical description of the AS3109:Voltage-controlled four-pole filter. The four independent sections can be connected together to enable a variety of filter responses, including common filters such as low-pass, high-pass, band-pass and all-pass. A single input exponentially controls the frequency over greater than a 15 octave range with little control voltage feedthrough. AS3109 benefits from high input impedance buffers.Pin-compatible replacement for the IR3109.Technically, the IC may differ slightly from the original. When replacing a Roland IR3109, the entire instrument must be recalibrated.The IR3109 was installed by Roland in the Jupiter series, the Juno series, the SH-101 and others, among others.Practical tips:These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Please be carefull because of static charing 

1 pcs. IC Socket DIP 8 Gold for ICTechnical Hint:Mounting of this part requiers soldering.  

1 pcs Roland Slide Potentiometer S3018P4CCB15  for BrillianceAttention: This SLider is without Center Click. Original Slider has Center Click. The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.