Roland Keyboards

Roland

Replacement parts for Roland PA4 and PA4A Keyboard

Ersatzteile Tastatur: Fulcrum 12P

Spare parts for Roland PA4 and PA4AKeyboardHere you will find different parts for Progressive Hammer Action Keyboard from Roland. These PA4 Keyboard was build by Roalnd in two different Versions. There exists a PA4 and a PA4A Version. The Parts i offer here fits for both Versions. Cusion, FeltHammerKey GuidePrice is valid for one spare part. Lower Cusion for Hammer in a Roalnd PA4 or Pa4A Keyboard (PArt-No: TTROPA4-ZU-FLTHA1)This Cussion is needed to stop hammer when falling down.Roland use here a material based on two different components.One side is self-adhesive.For a complette Keyboard wit 88 Keys you will need 2 of these cusionTTROPA4-ZU-FLTHA1.For all other Felt and Cusions you will need one part for a complete Keyboard.Please have a look at the video for replacing Hammers.

Variants from €1.49*

€ 17 .90*

Roland

Roland SK3 Rubbercontact 12P x1

1 pc. Contact rubber for old Roland keyboard Features: Height of contacts: 8 mm width of the strip: 16 mm Length of the strip: 162 mm Number of contacts per strip: 12 contactsOne contact strip consists of 12 contacts and thus covers one octave.This contact rubber has a notch to allow the contact rubber to be split. The division occurs with 7/5 contacts

€ 13 .90*

Synth-Parts

Key Guide NEW for Roland SK3 Keyboard

Replacement–set for broken key guides on Roland SK3 KeyboardsWith Roland Synthesizer and electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for old Roland instruments, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Roland key guides in an identical way. Therefore we offer you a matched spare part set for your Roland piano in our store.So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. YIncluded in the set:– Matched tube suitable for a keyboard with 88 keys.Tecnical advice for Grease:As we know there was no use of grease in these old keyboards.

€ 16 .66*

Roland

Replacement Keys for Roland PA4 Keyboard

Taste: Key A

Spare parts for Roland PA4 Keyboard Does a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken.This part fits for all Roland PA4 KeyboardsRoland PA4 Keyboard is used inRoland HP-237eRoland HP-555GRoland HP-7700Roland KR-370Roland KR-375Roland KR-570 und KR-575Roland KR-770Roland KR-1070Roland KR-4300Roland RD-500The S-Key fits in Keyboard PA4 AND PA4APlease have a look at the video for replacing Hammers.

Variants from €9.53*

€ 9 .98*

Roland

FFC cable set for Roland PHA Keyboard

FFC cable set for Roland PHA KeyboardsKeyboard connection cableThis set conists of two cables which connect the Keyboard with the Mainboard1 x 16P1 x 22PLength = 600 mmBoth sides have the same connector

€ 14 .90*

Roland

connection cable for Roland PHA Keyboard

1 pcs connection cable for your Roland PHA KeyboardThis Cable connects the Low, Mid and High Boards with the Mainborad of your Roland PHA Keyboard.Contacts: 16PPitch: 1,25 mmLength: 90 mm

€ 9 .90*

Roland

Contact rubber for Fatar (Roland) Keyboards

Kontaktgummi: 12 Contacts

Contact rubber for Fatar Keyboards build in in Roland Key InstrumentsRoland used in different Instruments Keyboards from Manufacturer Fatar. In this Keyboards are build in Contact rubber that is different to normal Fatar Contact Rubber.These Contact Rubber fits only in Fatar Keyboards used in Roland Instruments:Fatar TP/7SFatar TP/8SFatar TP/9SFatar TP10 MDRFatar TP10 ABSFatar TP40technichal dimensionsNo of contacts: 12 or 13Width: 22.7 mmheigh: 6.5 mmColor: white

Variants from €8.33*

€ 16 .10*

Roland

Contactubber for Roland SK8 Keyboard

Kontaktgummi: 12 Contacts

Contactrubber for Roland SK8 KeyboardRoland SK8 Keyboard is used inRoland JV-90Roland JX-30Roland JX-35Roland JX-50Roland XP-30Roland XP-50Roland XP-60Attention: This blue contactubber do not fit in old SK8 Keyboards

€ 12 .50*

Roland

Parts for Roalnd SK9 Keyboards

Taste: Spring

Parts for Roland SK9 KeyboardsHere you will find all parts like springs, felt, aftertouch and P.C.B.

€ 3 .33*

Roland

Hammer for Roland PHA Keyboard

Hammer: Hammer Zone 1

Hammer for Roland Progressive Hammer Action Keyboard- PHA2 and PHA3Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107e

€ 9 .62*

Roland

Contactubber for Roland MSK1/MSK2 Keyboard

Kontaktgummi: 12 Contacts

Contactrubber for Roland MSK1/MSK2 KeyboardThis Keyboard is used inRoland Juno D ( NEW TYPE !! CARBON CONTACT PCB )Roland Juno DiRoland Juno GRoland Juno Gi

€ 12 .50*

Roland

Replacement keys and spare parts for Roland SK7 Keyboard

Auswahl Ersatzteil: 12 Contacts

Spare parts for Roland SK7 KeyboardThis part fits for all Roland SK7 KeyboardsRoland SK7 Keyboard is used inD-70JD-800U-20 This keyboard is no longer available from Roland. Production discontinued.

Variants from €0.68*

€ 19 .90*

Roland

Replacement keys, weighted, new for Roland SK8 Synthesizer Keyboard

Taste: Key A

NEW Replacement Keys, weighted for Roland SK8 Synthesizer Keyboardused inRoland XP-30Roalnd XP-80This are new Key's without "Red Glue-Problem"

€ 12 .90*

Roland

Replacement keys for Roland PHA Keyboard ivory

Taste: Key A

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: creme white (ivory)

€ 9 .62*

Roland

Replacement keys, weighted for Roland SK8-P Keyboard

Taste: Key A

Replacement Keys, weighted for Roland SK8-P Keyboardused inRoland KR-650Note: This keyboard has the problem that the glue for the key weights does not fully cure. This causes the glue to "flow" and the key weights to fall out. Never store instruments with this problem upright. Then the glue flows over all the keys and glues them together. This is the so-called "red glue problem". We currently have buttons with triggered weights that we add separately in stock.

€ 9 .52*

Roland

Roland PHA Keyboard Parts

Ersatzteile Tastatur: Chassis 12P

Roland Progressive Hammer Action Keyboard PartsHere you can find Chassis and PCB

€ 28 .99*

Roland

Replacement keys, unweighted for Roland SK9 Keyboard

Taste: Key A

Keys, unweighted for Roland SK9 KeyboardThis part fits for all Roland SK9 KeyboardsRoland SK9 Keyboard is used inJP-8000Color/tint: pure white

€ 9 .62*

Roland

Replacement keys for Roland PHA Keyboard

Taste: Key A

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: pure white

€ 9 .62*

Roland

Contact rubber for Roland SK9 Keyboards

Kontaktgummi: 12 Contacts

Contact rubber for Roland SK9 Keyboardstechnichal dimensionsNo of contacts: 7,8, 12 or 13Width: 21 mmheigh: 9.8 mm

€ 13 .98*

Roland

Replacement Keys for Roland PA4A Keyboard

Taste: Key A

Spare parts for Roland PA4A KeyboardDoes a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken. This part fits for all Roland PA4A Keyboards Roland PA4A Keyboard is used in Roland A90 and A90exRoland FP-1 and FP-8 and FP-9Roland HP-145 and HP-147Roland HP-236 and HP-237 and HP-245Roland HP-2800 and HP-2880Roland HP-330 and HP-335 Roland HP-3800Roland HP-530 and HP-535 and HP-550 and HP-555Roland HP-5700Roland HP-730Roland RD600Roland XV-88 The S-Key fits in Keyboard PA4 AND PA4A. You can find it here: TTROPA4-KBLPlease have a look at the video for replacing Hammers.

Variants from €9.53*

€ 9 .98*

Roland

Replacement keys, weighted for Roland SK9 Keyboard

Taste: Key A

Keys, weighted for Roland SK9 KeyboardThis part fits for all Roland SK9 KeyboardsRoland SK9 Keyboard is used inFantom (FA76)Fantom G6, G7Fantom SFantom X6, X7XP-10Color/tint: pure white

€ 9 .87*

Roland

Roland PA4 contactrubber for Keyboard

1 pc. Contact rubber for Roland PA4 keyboardFeatures: Height of contacts: 9 mm width of the strip: 32 mm Length of the strip: 165 mm Number of contacts per strip: 12 contactsRoland spare part number: 22185247This contactrubber fits in Roland PA4 and also Roland PA4A Keyboard.One contact strip consists of 12 contacts and thus covers one octave. For a complete replacement of the contact strips in a keyboard with 88 keys, 7 contact strips + 4 contacts are needed. The remaining 4 contacts can easily be separated from a contact strip with 12 contacts. For this purpose, a notch is provided in the contact strip after every 4 contacts.

€ 11 .90*

Roland

Parts for Roland SK8-P Keyboard

Ersatzteile Tastatur: Contact Rubber 12P used

Parts for Roland SK8-P KeyboardHere you will find used parts like contact Rubber, Frames for Contact Rubber, Springs and Keyboard Circuit Boards.

Variants from €2.95*

€ 11 .90*

Roland

Roland PHA2 PWB Assembly

1 pcs. Service Kit Roland PHA2 PWB AssemblyThis service kit replaces the circuit boards and contact rubbers in the Roland PHA2 keyboard. Only possible as a replacement for keyboards in which contact rubbers with two contacts per tone were used.The set consists of three boards, fully equipped with new contact rubbers.It is only possible to exchange this sentence completely. From Roland this is the only suitable replacement.

€ 144 .99*

Roland Keyboards

Filter products

Roland Keyboards