Skip to main content Skip to search Skip to main navigation

Filter products

Yamaha SY-Serie

ALPS

Average rating of 0 out of 5 stars

tactile switch 4,3 mm Yamaha
tactile switch suitable for modelsYamaha DX7II, DX7IID, DX7IIFDYamaha SY77, SY99Yamaha Part no: KA907030 und VF946200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
€ 0 .65*
Jalco

Average rating of 0 out of 5 stars

YKB21-5012 - Phone Jack 1/4- 6.3 mm for printed circuits Mono
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg          partnumber: 454004300Roland       partnumber: 13449146Yamaha     partnumber: VB312600     YKB21-5012Yamaha     partnumber: VE742000     HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .49*
Jalco

Average rating of 0 out of 5 stars

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg          partnumber: 454004400Roland      partnumber: 13449125   HLJ0520-01-010Roland      partnumber: 13449145   YKB21-5010Yamaha     partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 2 .56*
Synth-Parts

Average rating of 0 out of 5 stars

Phone Jack 1/4 - 6.3 mm for printed circuits Mono with switch
1 pcs. Phone Jack 1/4 inch- 6.3 mm, mono with switch, for printed circuit used Roland or Yamaha InstrumentsPay attention! The solder contacts are arranged staggertly.The item is the same asHLJ 0521-01-1110HLJ 0541-01-1110HLJ 1520-01-3110HLJ 1540-01-3110This part is used inRoland Ersatzteilnummer 13449125  Yamaha Ersatzteilnummer LB203090Yamaha Ersatzteilnummer LB301930Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. Praktikal tip for phone jack:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

€ 2 .44*
Jalco

Average rating of 0 out of 5 stars

YKB21-5078 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5078HLJ-2305HTJ-064-16DThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .34*
Varta

Average rating of 0 out of 5 stars

CR2032 Solder pin for Yamaha DX-Series
1 pcs. CR2032 with 2 solder pin suitable forYamaha DX7, DX7 II, DX9, DX27, DX100Yamaha TG77Yamaha RX5, RX7, RX11Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The distance between the solder legs is 15 mm.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 3 .49*
E-Switch

Average rating of 0 out of 5 stars

1 pcs. Single pole push switch, 250V/5A with solder lugs SDDLD10900
1 pcs. Single-pole push switch in the switch design - OFF with solder terminals for cable assembly suitable for modelsKorg M1, M1RKorg T1, T2, T3Korg Part Number: 375006100The power switch corresponds to the ALPS switches SDDLD10900 TV5. This is no longer manufactured by ALPS.Termination Solder LugMounting holes with threadVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for a screw in a housing and has two threaded holes for M3 x 0.5 screws. The spacing of the mounting holes is 20 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 5 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*
Synth-Parts

Average rating of 0 out of 5 stars

Cage Nut M6 for Rack Mounting
1 pcs Cage Nut M6 for Rack Mounting  

€ 0 .49*
Hosiden

Average rating of 0 out of 5 stars

HLJ0544 Phone Jack 1/4 - 6.3 mm PCB Stereo ,Iron frame
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Stereo, for printed circuit with Iron FrameThe item is the same asHLJ 0544-01-010Technical description:The offered phone jack for PCB mounting is a mono jack one switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating.Praktikal tip:Pay attention! The solder contacts are arranged staggertly.These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
€ 4 .87*
Yamaha

Average rating of 0 out of 5 stars

Replacement keys and parts for FS Keyboard
Key: Aftertouch 76
1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition  

Variants from €0.67*
€ 88 .99*
Jalco

Average rating of 0 out of 5 stars

YKB21-5076 - Phone Jack 1/4- 6.3 mm PCB Mono
1 pcs. Phone Jack 1/4 inch - 6.3 mm, Mono witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5076HLJ-2305-01-3030These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .25*
Yamaha

Average rating of 0 out of 5 stars

Replacement keys and spare parts for Yamaha C61KG Keyboard
Auswahl Ersatzteil: Contactrubber 61P new
Spare parts for Yamaha C61KG KeyboardYamaha C61KG Keyboard is used inYamaha QS-300Yamaha QS-700Yamaha SY-22Color/tint: creme white

Variants from €2.36*
€ 27 .89*
Synth-Parts

Average rating of 0 out of 5 stars

Yamaha TG77 new LCD Display black with cable Kit
1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha TG77We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha TG77:Inside Yamaha TG 77 is very little space for the new display. A circuit board is mounted behind the display, it is called switch panel. On this switch panel a number of diodes are soldered which can collide with the new display. It is highly advisable to move these diodes to the back of the switch panel.This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display black with cable Kit for Yamaha SY99 SY77
1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Replacement:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes on installation the Display in Yamaha SY77 or SY99:The instrument must be disassembled almost completely to reach the display.  This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter. 

€ 99 .00*
ALPS

Average rating of 0 out of 5 stars

Encoder EC24B50D
1 pcs Encoder EC24B50D Practical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 35 .70*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display white with cable Kit for Yamaha SY99 SY77
1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99 We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Pleaase let us know your instrument, so we can put on right cable length. Benefits for this Display Replacement with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation this Display in Yamaha SY77 or SY99:The instrument must be disassembled almost completely to reach the display.  This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

5 pcs. Contact Cleaning Stripes for electrical contacts
5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.

€ 11 .90*
Varta

Average rating of 0 out of 5 stars

2 pcs. CR2032 Solder pin for Yamaha SY99
2 pcs. CR2032 with solder pin suitable forYamaha SY99 Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

€ 6 .69*
Synth-Parts

Average rating of 0 out of 5 stars

Battery holder for CR2032 for PCB mounting
1 pcs. Battery holder for CR2032 for PCB mountingAttention: Shipping for Europe only Technical Description:  Information for handling old Battery's

€ 2 .95*
Yamaha

Average rating of 0 out of 5 stars

Yamaha Potentiometer for Modulation
1 pcs. Rotary Potentiometer for Modulation suitable forYamaha MotifResistance: 10 KOhm

€ 13 .78*
Synth-Parts

Average rating of 0 out of 5 stars

Battery holder for CR2032 for PCB mounting
1 pcs. Battery holder for CR2032 for PCB mountingAttention: Shipping for Europe only Technical Description:  Information for handling old Battery's

€ 16 .59*
Synth-Parts

Average rating of 0 out of 5 stars

Floppy2USB Yamaha SY99 Floppy Emulator
1 pcs. Floppy2USB Adapter suitable for Yamaha SY-77Yamaha SY-99 

€ 115 .00*
Synth-Parts

Average rating of 0 out of 5 stars

Yamaha TG77 LCD Display blue with cable Kit
1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forYamaha TG77We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope of LCD Display Replacmeent:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation the Display in Yamaha TG77:Inside Yamaha TG 77 is very little space for the new display. A circuit board is mounted behind the display, it is called switch panel. On this switch panel a number of diodes are soldered which can collide with the new display. It is highly advisable to move these diodes to the back of the switch panel.This work is to be done only by technically, best electrotechnically savvy people.  

€ 99 .00*
Synth-Parts

Average rating of 0 out of 5 stars

LCD Display white with cable Kit for Yamaha TG77
1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha TG77We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:Inside Yamaha TG 77 is very little space for the new display. A circuit board is mounted behind the display, it is called switch panel. On this switch panel a number of diodes are soldered which can collide with the new display. It is highly advisable to move these diodes to the back of the switch panel.This work is to be done only by technically, best electrotechnically savvy people.

€ 99 .00*

Yamaha SY series Synthesizer

Yamaha launched the SY series as the successor to the digital synthesizer Yamaha DX7. The Yamaha SY-99 is the big model of this series with a key range of 76 pressure and velocity sensitive keys. Also available in the series is the SY-77 with a key range of 61 keys and the TG-77 which functions as a rack synthesizer without keys and is controlled purely via MIDI.

Yamaha SY-series today

The Yamaha SY-series is a digital synthesizer with FM sound modulation. Furthermore, the synth also has Wave Rom extensions. The synthesizer was introduced to the market in 1991. The Yamaha SY series Synthesizers also has a broad market breadth today and there is a wide range of add-on modules and feature enhancements. There are various Usergroups in which a lively exchange takes place. The benefits for the SY series are often called the good keyboard and this synthesizer is a good to use as masterkeyboard. Furthermore, everything is housed in a very sturdy metal housing which brings high stability and long life.

Spare parts and repairs

We offer spare parts for this synthesizer in our online shop. Due to the age of this beautiful synth's not all spare parts from the manufacturer are now available as new. In order to make our offer attractive, we use different sources for our spare parts offer. So far you can find in our shop OEM spare parts. When it comes to spare parts for the keyboard or the housing, we make use of used spare parts which are in good condition. As a special highlight we can offer brand new LCD displays with LED backlight. The original displays are today often difficult to read. Another advantage is the whistling that occurs with many synthesizers disappears.

All the work that is due on SY99,sy77 or TG77 whether the replacement of potentiometer, tactile switch or encoders or the installation of a replacement LCD display, we perform all repair and replacement work professionally for you.

Software update:

Various operating system versions have been created for the SY99. Especially the update to the OS version 1.57 requires extensive work which we also gladly offer and carry out.