Roland RD-Serie

Panasonic

tactile switch 5 mm for Roland

1 pcs. tactile switch suitable for models RolandFP1, FP2, FP3, FP4, FP5, FP6, FP7, FP8, FP-50JV25, JV30, JV35, JV50, JV80, JV90, JV880, JV1080JP8000JD800 - Cursor ButtonsMC-303, MC-307RD-500XP10, XP50, XP60, XP80XV3080U20Fantom X6,X7,X8 without REC/PLAY/STOPOnly for non-illuminated buttons:A90, A90-EXXP30JV1000JP8080RD-600,RD-700Roland Part Number: 13169697 or 13169752The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Roland

Replacement parts for Roland PA4 and PA4A Keyboard

Parts Keyboard: Fulcrum 12P

Spare parts for Roland PA4 and PA4AKeyboardHere you will find different parts for Progressive Hammer Action Keyboard from Roland. These PA4 Keyboard was build by Roalnd in two different Versions. There exists a PA4 and a PA4A Version. The Parts i offer here fits for both Versions. Cusion, FeltHammerKey GuidePrice is valid for one spare part. Lower Cusion for Hammer in a Roalnd PA4 or Pa4A Keyboard (PArt-No: TTROPA4-ZU-FLTHA1)This Cussion is needed to stop hammer when falling down.Roland use here a material based on two different components.One side is self-adhesive.For a complette Keyboard wit 88 Keys you will need 2 of these cusionTTROPA4-ZU-FLTHA1.For all other Felt and Cusions you will need one part for a complete Keyboard.

Variants from €1.49*

€ 17 .90*

Jalco

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo

1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg partnumber: 454004400Roland partnumber: 13449125 HLJ0520-01-010Roland partnumber: 13449145 YKB21-5010Yamaha partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From

€ 2 .56*

ALPS

tactile switch 5 mm for Roland

tactile switch suitable for models RolandD-50, D-70Juno 1, Juno 2, Juno 106, Juno 106SG-800S50W30Roland Part Number: 13169633 and 13129753The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

Jalco

YKB21-5078 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5078HLJ-2305HTJ-064-16DThese phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 4 .34*

Jalco

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo

1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

€ 6 .88*

Roland

Replacement Keys for Roland PA4 Keyboard

Key: Key A

Spare parts for Roland PA4 Keyboard Does a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken.This part fits for all Roland PA4 KeyboardsRoland PA4 Keyboard is used inRoland HP-237eRoland HP-555GRoland HP-7700Roland KR-370Roland KR-375Roland KR-570 und KR-575Roland KR-770Roland KR-1070Roland KR-4300Roland RD-500The S-Key fits in Keyboard PA4 AND PA4APlease have a look at the video for replacing Hammers.

Variants from €9.53*

€ 9 .98*

Synth-Parts

Roland HP series Volume Potentiometer

1 pcs. slide potentiometer with 30mm travel and 15mm Lever. Suitable forRoland HP-136Roland HP-236Roland HP-237Attention: Lever - Slide pin must be shortende around 5 mmThis volume control with the labelling EWANNBX10B14 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 k? (Kilo-Ohm), the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of black plastic and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

€ 8 .33*

Roland

Replacement keys for Roland PHA Keyboard

Key: Key A

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: pure white

€ 9 .62*

Panasonic

tactile switch 5 mm for Roland

1 pcs. tactile switch suitable for modelsRoland MC-505Roland MC-808Roland MC-909Roland Part Number: 1343478The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From

€ 0 .65*

E-Switch

Single pole push switch, 250V/4A for PCB mounting SDDLD12200

Single-pole push switch in the switch design - OFF with solder pins for PCB mounting suitable for modelsKorg Korg Part Number:The power switch corresponds to the ALPS switches SDDLD12200 TV3. This is no longer manufactured by ALPS.Termination Solder pinMounting PCBVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for PCB mounting. Therefor are tow solder pins as Snap-In pins in the front. The spacing of the snap in pins is 16 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 4 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

ALPS

Power Switch, 250V/4A, PCB

1 pcs. Single-pole Power Switch in the switch design - OFF with solder pins for PCB mounting suitable for modelsKorg Korg Part Number:Termination Solder pinMounting PCBVDE-tested Supplied without capMechanical Description:The housing of the switch is made of nylon 66. The switch is provided for PCB mounting. Therefor are tow solder pins as Snap-In pins in the front. The spacing of the snap in pins is 16 mm. The housing cut job of performing the switching element should be 4x4 mm. The switch itself has a width of 10 mm, a length of 27 mm and a height of 17.90 mm. The protruding switching element has a length of 18 mm. Electrical properties:The electrical components are made of copper with a silver or tin plating. The electrical connection is made with solder connections for cable assembly. The length of the terminals is 4.2 mm and a width of 3 mm.The electrical load is 4 A at 250 VAC.Knowledge in soldering is required for switch replacement.

€ 6 .95*

Synth-Parts

D/A-Converter AK4396VF VSOP28 SMD housing

Digital-Analog-Converter AK4396VF for audio application from AKM (Asahi Kasehi) - compatible with AK4393VF Resolution: 24bitInterface: seriellCase: VSOP28Mechanical Description:The digital to analog converter is housed in a VSOP28 package and is designed for surface mounting on a circuit board. The D/A converter has 2 x 14 connecting pins with grid of 0.65 mm .Technical Description:This D/A converter was developed specifically for use in audio applications. The interface is serial and provides a 24 bit resolution.

€ 9 .52*

Roland

Hammer for Roland PHA Keyboard

Hammer: Hammer Zone 1

Hammer for Roland Progressive Hammer Action Keyboard- PHA2 and PHA3Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107e

€ 9 .62*

Roland

Replacement keys for Roland PHA Keyboard ivory

Key: Key A

Replacement Keys for Roland Progressive Hammer Action Keyboard- PHA2Roland PHA Keyboard is used inRoland Fantom X8Roland HP-107eColor/tint: creme white (ivory)

€ 9 .62*

Roland

Roland PHA Keyboard Parts

Parts Keyboard: Chassis 12P

Roland Progressive Hammer Action Keyboard PartsHere you can find Chassis and PCB

€ 28 .99*

Roland

Replacement Keys for Roland PA4A Keyboard

Key: Key A

Spare parts for Roland PA4A KeyboardDoes a key on your electric piano hang or clack loudly when you play it? In these cases, it is usually not the key that is defective but the underlying hammer that is broken. This part fits for all Roland PA4A Keyboards Roland PA4A Keyboard is used in Roland A90 and A90exRoland FP-1 and FP-8 and FP-9Roland HP-145 and HP-147Roland HP-236 and HP-237 and HP-245Roland HP-2800 and HP-2880Roland HP-330 and HP-335 Roland HP-3800Roland HP-530 and HP-535 and HP-550 and HP-555Roland HP-5700Roland HP-730Roland RD600Roland XV-88 The S-Key fits in Keyboard PA4 AND PA4A. You can find it here: TTROPA4-KBLPlease have a look at the video for replacing Hammers.

Variants from €9.53*

€ 9 .98*

Roland

Roland PA4 contactrubber for Keyboard

1 pc. Contact rubber for Roland PA4 keyboardFeatures: Height of contacts: 9 mm width of the strip: 32 mm Length of the strip: 165 mm Number of contacts per strip: 12 contactsRoland spare part number: 22185247This contactrubber fits in Roland PA4 and also Roland PA4A Keyboard.One contact strip consists of 12 contacts and thus covers one octave. For a complete replacement of the contact strips in a keyboard with 88 keys, 7 contact strips + 4 contacts are needed. The remaining 4 contacts can easily be separated from a contact strip with 12 contacts. For this purpose, a notch is provided in the contact strip after every 4 contacts.

€ 11 .90*

Synth-Parts

Roland RD700SX PSU Recapping Set

Roland RD700SX Recapping Set PSUWarning: Switching power supplies store high amounts of energy for long periods of time. You are working on assemblies that operate at 230 V AC and approx. 300 V DC.You are carrying out this work at your own risk and under your own responsibility.A switching power supply from Sharp was installed in the Roland RD-700SX. The Sharp name is: B184. We have provided an example image of the SPSU here.The wear parts of the electronics are electrolytic capacitors. Capacitors are aging, and you will see the effect at first when it comes to greater damage because of overvoltage.Our recapping set consists of capacitors from renowned manufacturers. Preferably from Nichicon, Würth or Vishay. The Capacitors are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

€ 28 .99*

Filter products

Roland RD-Serie