Yamaha SY99
tactile switch suitable for modelsYamaha DX7II, DX7IID, DX7IIFDYamaha SY77, SY99Yamaha Part no: KA907030 und VF946200The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
1 pcs. Phone Jack 1/4 inch- 6.3 mm, Mono for printed circuit used in Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5012HLJ-0520-01-010HLJ 4306HLJ 4306-01-3000Mono with switchit is used by the following manufaturesKorg partnumber: 454004300Roland partnumber: 13449146Yamaha partnumber: VB312600 YKB21-5012Yamaha partnumber: VE742000 HLJ 4306These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 pcs. CR2032 with 2 solder pin suitable forYamaha DX7, DX7 II, DX9, DX27, DX100Yamaha TG77Yamaha RX5, RX7, RX11Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version. The distance between the solder legs is 15 mm.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's
1 pcs. weighted Key's suitable for Yamaha FS-Keyboardin earlier times this Yamaha Fs Keyboard was also used in Korg Instruments.Please choose your spare part with dropdown menue on left side.Color: cremewhiteThis key is used and in a good kondition
1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character / Black BackgroundDelivery scope of LCD Display Replacement:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtion Notes on installation the Display in Yamaha SY77 or SY99:The instrument must be disassembled almost completely to reach the display. This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.
5 pcs Contact Cleaning Stripes for electrical contacts These contact cleaning stripes are spezial developed for cleaning electrical Contacts.The strip consists of a kind of paper that is quite hard, does not fuzz and is abrasion resistant. The strip was then soaked with a special cleansing solution.
2 pcs. CR2032 with solder pin suitable forYamaha SY99 Attention: Shipping for Europe only Technical Description:The dimensions of CR2032 are diameter of 20 mm and a thickness of 3mm. Due to the soldering legs, the installation height is 6 mm for this horizontal version.Manufacturer: Panasonic or VartaPractical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's
1 pcs Encoder EC24B50D Practical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99 We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character / White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Pleaase let us know your instrument, so we can put on right cable length. Benefits for this Display Replacement with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation this Display in Yamaha SY77 or SY99:The instrument must be disassembled almost completely to reach the display. This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.
1 pcs. Floppy2USB Adapter suitable for Yamaha SY-77Yamaha SY-99
1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character / Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument. Please let us know your Instrument, so we can put on right cable length.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation The LCD Display in Yamaha SY77 or SY99: The instrument must be disassembled almost completely to reach the display. This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.
1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha SY77Yamaha SY99We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character / yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument. please let us know your instrumentBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionThis Display fits inNotes on installation:The instrument must be disassembled almost completely to reach the display. This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.
1 pcs. Rotary Potentiometer for Modulation suitable forYamaha MotifResistance: 10 KOhm
Digital-Analog-Converter for audio application for Roland E-PianosPCM56P von Texas InstrumentsThis part is used from RolandRoland part number:15209122 Resolution: 16bitInterface: seriellConversion rate: 666kS/sNumber of DAC outputs: 2Number of channels: 1Case: DIP16warm-up time: 1 minMechanical Description:The digital to analog converter is housed in a DIP 16 package and is designed for classic through hole mounting on a circuit board. Use of a socket is possible. The DA converter has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm.Technical Description:This D/A converter was developed specifically for use in audio applications. The DA converter provides low distortion and typical differential linearity error is 0.001%. The interface is serial and provides a 16 bit resolution. The conversion rate is 666kS / s. For operation, no external components, such as temperature compensation or similar is required.It is a symmetrical supply voltage of +- 5V to +- 12V needed.
Rotary potentiometer for LCD Contrast adjustment The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Rotary Potentiometer new for Modulation 2 suitable forYamaha SY99 Modulation 2Resistance: 10 KOhm
1 pcs. Volume Slide potentiometer with 30mm travel. Suitable forYamaha SY77Yamaha SY99------- Out of Production --------Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 pcs. Slide potentiometer with 30mm travel. Suitable forYamaha SY77 - Data EntryYamaha SY99 - Data Entry This part is no longer availabel from Yamaha.This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 piece LED 3 mm Red with clear-diffused Body The LED are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 piece bicolor LED 3 mm Red-green with clear-diffused Bodytecnical Hint:The housing of the LED is slightly flattened on one side. Same installation position as the original LED.The LED are firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.
1 pcs. IC HD6475328CP10 V1.4 CPU SY99Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. IC TC574000D-120 V1.4 SY99Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. IC ROM D SY99Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. IC ROM-C V1.2 5.0 SY99Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
Yamaha SY99 synthesizer
Yamaha launched the SY series as the successor to the digital synthesizer Yamaha DX7. The Yamaha SY-99 is the big model of this series with a key range of 76 pressure and velocity sensitive keys. Also available in the series is the SY77 with a key range of 61 keys and the TG77 which functions as a rack synthesizer without keys and is controlled purely via MIDI.
Yamaha SY99 today
The Yamaha SY-99 is a digital synthesizer with FM sound modulation. Furthermore, the synth also has Wave Rom extensions. The synthesizer was introduced to the market in 1991. The Yamaha SY99 also has a broad market breadth today and there is a wide range of add-on modules and feature enhancements. There are various Usergroups in which a lively exchange takes place. The benefits for the SY99 are often called the good keyboard and this synthesizer is a good to use as masterkeyboard. Furthermore, everything is housed in a very sturdy metal housing which brings high stability and long life.
Spare parts
We offer spare parts for this synthesizer in our online shop. Due to the age of this beautiful synth's not all spare parts from the manufacturer are now available as new. In order to make our offer attractive, we use different sources for our spare parts offer. So far you can find in our shop OEM spare parts. When it comes to spare parts for the keyboard or the housing, we make use of used spare parts which are in good condition. As a special highlight we can offer brand new LCD displays with LED backlight. The original displays are today often difficult to read. Another advantage is the whistling that occurs with many synthesizers disappears.
All the work that is due on SY99, whether the replacement of potentiometer, tactile switch or encoders or the installation of a replacement LCD display, we perform all repair and replacement work professionally for you.
Software update:
Various operating system versions have been created for the SY99. Especially the update to the OS version 1.57 requires extensive work which we also gladly offer and carry out.