Skip to main content Skip to search Skip to main navigation

Filter products

MPC 1000

Jalco

Average rating of 0 out of 5 stars

YKB21-5010 - Phone Jack 1/4 - 6.3 mm PCB Stereo
1 pcs. Phone Jack 1/4 inch- 6.3 mm, stereo, for printed circuit used in  Korg, Roland or Yamaha Instrumentsthis phone jack corresponds to these parts:YKB21-5010HLJ0520-01-010HLJ1520-01-3010HTJ-064-10Dsame PCB layout, different housingHLJ4416-01-3020it is used by the following manufaturesKorg          partnumber: 454004400Roland      partnumber: 13449125   HLJ0520-01-010Roland      partnumber: 13449145   YKB21-5010Yamaha     partnumber: VE382300Technical description Jalco YKB21-5010:The offered phone jack for PCB mounting is a stereo jack without switching contact for 1/4 inch. The housing is made of black synthetic material and the electrical parts are made of a copper alloy with a tin coating. This phone jack is available from various manufacturers in the same mechanical and technical construction. An exception is the manufacturer HOSIDEN using a wider housing. The electrical connection has the same structure.Praktikal tip:These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

From
2 .56*
ALPS

Average rating of 0 out of 5 stars

tactile switch 5 mm for AKAI
1 piece tactile switch suitable for modelsAKAI MPC-500AKAI MPC-1000AKAI MPC-2000AKAI MPC-2500AKAI MPC-4000Akai Part Number:  ES-349474 und ES-411687NThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

From
0 .65*
Jalco

Average rating of 0 out of 5 stars

YKB21-5006 - Phone Jack 1/4- 6.3 mm for printed circuits Stereo
1 pcs. Phone Jack 1/4 inch - 6.3 mm, stereo with 2 switch, printed circuit for Korg, Roland or Yamaha Instrumentsthis Phone Jack corresponds to these parts:YKB21-5006HLJ-4306-01-3040HTJ-064-04These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

6 .88*
Synth-Parts

Average rating of 0 out of 5 stars

AKAI MPC1000 Encoder specIal new
1 pcs. AKAI MPC1000 Encoder special spare partTo replace the plastic shaft encoder in the AKAI MPC 1000.Encoder with plastic shaft: The wiring on the board has to be changed. We include instructions on how to do this with the order. For this work you need soldering skills and a piece of insulated wire.Mechanical note for the MPC1000 encoder:The axis of the encoder is approx. 0.5 mm longer than the axis of the original encoder in the MPC 1000. It can happen in rare cases that the encoder wheel scrapes the housing.Note on the OS version in the MPC1000:with older versions of the operating system in the MPC 1000 it can be that the encoder shows a different behavior. In this case please update to the current JJ OS.Practical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

8 .45*
Synth-Parts

Average rating of 0 out of 5 stars

tactile switch 12 mm for AKAI MPC
1 piece Tactile switch 12 mm suitable for models AKAI MPC-1000AKAI MPC-2000AKAI MPC-2500AKAI MPC-4000These switch is used for REC,PLAY,STOP,TAP (6 pcs)Part Number: : ES-415015JThe buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

1 .69*
Synth-Parts

Average rating of 0 out of 5 stars

MPC-1000 full Set tactile switch Akai
Complete Set tactile switch suitable forAKAI MPC-1000Part Number: :  AKAI: ES-415015J and ES-349474  Delivery Quantity: 35The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required

18 .99*
Synth-Parts

Average rating of 0 out of 5 stars

AKAI MPC-1000 LCD Display black with cable Kit
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-1000We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with white letters and black BacklightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-1000. The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-1000 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.Unfortunately, we cannot offer the complete instrument, but only a new LCD display.The color of the shown display on picture, may differ from the original.Color: White Character  /  black BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the Stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

95 .00*
Synth-Parts

Average rating of 0 out of 5 stars

AKAI MPC-1000 LCD Display white with cable Kit
1 pcs. white LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-1000We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and white backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-1000. The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-1000 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.The color of the shown display on picture, may differ from the original.Color: Black Character  /  white BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask. 

95 .00*
Synth-Parts

Average rating of 0 out of 5 stars

1 pcs. Cap round for power switch
 1 pcs. Cap round for power switch

2 .44*
Synth-Parts

Average rating of 0 out of 5 stars

AKAI MPC-1000 LCD Display blue with cable Kit
1 pcs. black LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-1000We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with white letters and blue backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-1000. The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-1000 sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.Unfortunately, we cannot offer the complete instrument, but only a new LCD display.The color of the shown display on picture, may differ from the original.Color: White Character  /  black BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

95 .00*
Synth-Parts

Average rating of 0 out of 5 stars

AKAI MPC-1000 LCD Display yellow with cable Kit
1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-1000We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and yellow-green backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-1000. The display fits harmoniously into the design of the sampler.The color of the shown display on picture, may differ from the original.Color: Black Character  /  yellow BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the Stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

95 .00*
ALPS

Average rating of 0 out of 5 stars

AKAI MPC1000 MPC500 Fader Potentiometer
1 pcs. Slidepotentiometer. Suitable forAKAI MPC500AKAI MPC1000The lever (sliding pin) is here about 3 mm longer than the original. However, the pin can be shortened well with a pair of straight pliers.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

9 .45*

Order spare parts for AKAI MPC-1000 easily online.


Synthesizers and samplers are devices that are exposed to a continuous load and must withstand it reliably. This is true for private use, as well as for professional use. If the smallest components do not work, the entire system cannot deliver the desired first-class sound. We offer in our store MPC spare parts products that continue brand quality even after replacement in the usual way. This includes synthesizer spare parts and sampler spare parts, but also encoder for Akai MPC 1000, jack socket for PCB mounting or LCD display for Akai MPC-1000. All MPC-1000 spare parts in our store have one thing in common: they convince in material and workmanship quality. We know that when musicians are hitting the keys or technicians are doing their job, there is no time for long breakdowns. Therefore, the Akai MPC spare parts are optimally compatible and can be replaced without any problems and, above all, quickly and easily. The gig or rehearsal can continue immediately afterwards. Just give us a call or send an email if you are not sure which spare part for Akai MPC-1000 you should buy, or which synthesizer spare parts or sampler spare parts are the right ones for the models you use. We will be happy to advise you!

Do not compromise on quality


A system is only as powerful as its smallest component. This means for you that Akai MPC-1000 spare parts should also be purchased and installed in brand quality that you know from the manufacturer. This applies to tact switch for Akai MPC 1000, as well as to the LCD display for Akai MPC 1000 or any other Akai spare parts. If you compromise here, you are making a big mistake. Professionalism, which you need on stage, is also essential for spare parts. No matter if you want to buy an potentiometer for Akai MPC 1000 or a tact switch for Akai MPC-1000, the same professional quality is appropriate as if a device is bought completely. For all questions we are happy to help you. Jack for PCB? Symthesizer spare part? No matter what you need: We advise you competently, so that your favorite music can sound as usual again. Online ordering is quick and uncomplicated, and we are always your efficient contact partner when it comes to installing the spare parts.