1 pcs. Hammer Felt 1 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.A remedy here is the use of a new felt that is glued behind the original felt. A simple one, but effective solution.Made in Germany.You will need one for a complete Keyboard.One-sided self-adhering
Hammer Felt 2 for Technics E-Piano KeyboardThis results in very loud rattling when playing.Source of this rattling are the hammers. The hammers will no longer stopped by the felt and so the hammers clicking to the metall frame.We created a new felt that is based on a two componnent material like the original one. Here you has to replace the original felt with this new one.You will need 2 of these felts for a complete Keyboard.One-sided self-adheringInstallation note:Unfortunately, the old felt is difficult to access. It is very time-consuming to remove the old felt completely because the felt is difficult to access. Unfortunately, we have not had a good idea to simplify this. Gluing in the new felt is quite easy.
Hammer for a Technics E-Piano, 88 Key HammeractionThe hammers are used and in good condition. All keys supplied by us have been tested.2. different hammer versions:Please pay attention to the details. This Technics keyboard is also available with a pressure point simulation. The hammers in this keyboard version are constructed slightly differently in detail. Please take a close look.Technics has always used the same keyboard for many years. Today it has the advantage that the spare parts are easily interchangeable between the different instruments.We are of the opinion that Technics has used a very good and above all durable keyboard here. In addition to the good sound of the electric pianos, this is a definite plus point in favour of Technics electric pianosAssembly instructions:To be able to use a hammer, the keyboard must at least be unscrewed. This allows the keyboard as a whole to be pushed slightly away from the front edge. Now the key must be unscrewed. The hammer can then be removed from the top.Â
Replacement–set for broken key guides on Technics electric pianosWith Technics electric pianos, it can happen over time that the original key guides break because of aging. This leads to a hanging or grinding of the keys. Since there are no more original spare parts for Technics, we have been looking for an alternative. Through various application tests and material research, we have found a product that fulfills the characteristics of the original Technics key guides in an identical way. Therefore we offer you a matched spare part set for your Technics piano in our store. Why we don't have the parts rebuilt?For the reproduction of a plastic part, an individually made injection mold must be produced. Due to the rather special shape of the original key guide, the effort is very high and expensive. This would drive up the final selling price dramatically and would simply not be profitable for us. But since we have tested our product extensively, we can sell our alternative with a clear conscience. So that everyone can get an impression of our product and the handling or the exchange, we have prepared a suitable blog post and a PDF variant to print out. You will also receive a printed manual with the product when you order it. Included in the set:– Matched tube suitable for a keyboard with 88 keys.– Special keyboard grease– Instruction manualWhen replacing the key guides, it is necessary to grease the new parts. For this reason, a suitable grease especially for electric pianos is included in the set.Â
1 pcs. tactile switch suitable for Technics E-Pianos and Keyboardssuitable for:Â PX20PX73PX101PX103PX111PX222PX663PR307KN5000KN6000KN7000Â The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton
1 pcs. Power Switch Assembly 100 cm for Technics E-PianosThis power supply assembly is complete and ready to be installed. This module is used with different cable lengths in many Technics E-Pianos.Used item, we do not accept any function guarantee for the power switch !!!230V articles. Before any work: Pull the mains plug !!!Cable length: 100 cm
Key's for a Technics E-Piano, 88 Key HammeractionThe keys are used and in good condition. All keys supplied by us have been cleaned and checked.Since these are used keys, color deviations may occur. Technics has always used the same keyboard for many years. We think Technics has used a very good and above all durable keyboard.
versenkbare Tastaturabdeckung für Technics E-PianosTastaturabdeckungMontageschiene AluminiumStange, AluminiumHalter für StangeZahnradBei E-Pianos oder Digitalpianos von Technics ist es Standard das es eine versenkbare Tastaturabdeckung gibt. Die Tastaturabdeckung wird leicht angehoben und rollt dann sehr leicht in das innere des Pianos und gibt die Tastatur frei.Die Tastaturabdeckung ist ein Deckel der aus dem gleichen Material gefertigt ist wie der Korpus des Pianos. In der Regel ist das Spanplatte oder MDF-Platte. An der Vorderseite ist wahlweise eine Aluminiumschiene oder ein Holzsteg befestigt durch den der Deckel im geschlossenen Zustand auf dem Korpus des Pianos aufliegt. An der Rückseite ist eine durchgehende Aluminiumstange montiert. An jedem Ende dieser Stange ist ein Zahnrad aus Kunststoff befestigt. Diese Zahnräder bewegen sich auf Zahnstangen die im innern des Pianos am Korpus befestigt sind.
Mainboard for Technics E-PianosTechnics SXPX-222Technics SXPX-332These Mainboard is tested by us and fully working. We sell it with one year warranty.Is your e-piano faulty or no sound?Even if we do not have the appropriate board in stock, we can repair your board - with warranty. Usually it is enough if you send us the mainboard and the AmpBoard.Â