Potentiometer

1 pcs. Slider with 45mm Travel. Suitable for Korg TriniityThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Slidepotentiometer. Suitable for Brillinace Slider inYamaha This slider has center clickThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

11 pcs. Slide potentiometer with 20mm travel. Suitable forRoland TR-707Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements.The slide potentiometer has a travel of 20 mm.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

1 pcs. Slidepotentiometer with 30mm Travel. Suitable for Volume Slider forKawai K4Kawai K4r The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Rotary Potentiometer for pitch bendThis poti is used inYamaha MOX6Yamaha MOX8

1 pcs. Replacement rotary potentiometer suitable forTechnics PC-15 VolumeTechnics PC-25 VolumeThe axis is shorter than the original.Electrical properties:The nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 25 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. POTENTIOMETER CS-01-2Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. POTENTIOMETER C500K PSS-260Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. SLIDE VARIABLE RESISTOR C1MSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. SLIDE POT. C10.0KX2 RS15H12AD QY20Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. ROTARY VARIABLE RES. A20K XV012313 MG16Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Kawai NV5 Pedal Potentiometer with cableThis is a replacement Poterntiomter for Damper Pedal from E-Piano.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Pedal.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

1 pcs. Rotary Potentiometer vertikal 12 mm with center TapCenter Tap function: no deviation in center positionSubstitute rotary potentiometer forYamaha RS7000Pitch Bend, ENV.DEPTH,SWING VELOCITY, CLOCK SHIFT MIDI DELAY, BEAT STRETCH GATE TIMEElectrical properties:The nominal resistance has 10 kOhm (Kilo-Ohm), the electric resistance gradient runs linear.Appearance (technical characterisation):The casing measures 12 mm bright, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has TAP function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

Rotary potentiometer for LCD Contrast adjustment  The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs Rotary Potentiometer vertikal 9 mm, 10kOhmSubstitute rotary potentiometer for Roland Fantom X6   -     Realtime ControlRoland Fantom X7   -     Realtime ControlRoland Fantom X8   -     Realtime ControlElectrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 9,7 x 12,5 mm, the total length without pins is 22,5 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The Three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 11 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 Set Korg Pitch Bend Potentiometer witch PCB KLM2304 / KLM2305This is a replacement Poterntiomter for Korg Pitch Bender. This Potentiomter will fit in a realy large range of Korg Instruments.In doubt please compare spare part number with your Service Manual.This is a set of two Potentiometers for Korg Pitch Bend.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Korg Pitch Bend.Replacement for PCB KLM2304 and KLM2305Useful hint:This Potenziometer is ready mounted on the PCB. For replacement you have only to connect the cable.

1 pcs. Rotary Potentiometer new for Modulation 2  suitable forYamaha SY99 Modulation 2Resistance: 10 KOhm

1 pcs. Rotary Potentiometer vertikal 9 mm, 10kOhmSubstitute rotary potentiometer for RoThe rotary pot fits also inKorg KorgElectrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 10 x 12 mm, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of gray plastic. Its head has a slot and ends in corner radius. The three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 11 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

Mono slide potentiometer with 45mm travel and 15mm Lever. Suitable parameter Slider forKorg OasysElectrical properties:The stereo nominal resistance has 10 kOhm (Kilo-Ohm), the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation): The slide potentiometer has a travel of 45 mm. Its metallic casing measures 60 x 8 mm, the height without lever is 7 mm. The lever is made of metall and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 1,2 mm. The solder contact pins are 0,8 mm wide (one of them).In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The value control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.

1 pcs. Slider with 45mm Travel. Suitable for  Kurzweil SP88Roland MC909 The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

Stereo Slider with 30mm Travel. Suitable for Volume Slider forKawai ES6The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Slider with 45mm Travel. Suitable for  Kurzweil  The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

Mono Slide Potentiometer with 30mm Travel. Suitable for forKawai ES100 The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.

1 pcs. Volume Slide potentiometer with 30mm travel. Suitable forYamaha SY77Yamaha SY99-------  Out of Production     --------Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.