Potentiometer
1 pcs. Roland V-Synth Potentiometer for TVAfit nRoland V-Synth - TVARoland VP-550 - MIC direct / Ensemble Level This Fader with the labelling EWANKEC15B14 is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part. Electrical properties:The nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position.The slide potentiometer has a travel of 30 mm. Its metallic casing measures 45 x 8 mm, the height without lever is 7 mm. The lever is made of metall and ends in corner radius. Its height is 15 mm, the breadth is 5 mm and its depth is 2 mm. The eight solder contact pins are 0,8 mm wide (one of them) and they are arranged in a distance of 3 mm. The bented pins are necessary for the electrical function.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The potetniometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
1 pcs. Fatar Studiologic Data Entry Slider 10K Ohmpractical advice:The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Roland Jupiter 6 Potentiometer 16mmThis Potentiometer fit on Roland Jupiter 6 for all upper panel except VCO and VCF on bender panel. Difference to the original Roland Jupiter 6 potentiometer:The thread is M8 on the original and M7 on our new replacement potentiometer. Since this is not used, the difference is negligible.Installation note:Replacing the potentiometers requires soldering skills.
1 pcs. Kawai Rotary Potentiometer for pitch bendThis poti is used in
1 pcs. Kawai Value Slider 30mm Travel The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. ROTARY VR B10K EVJ05DF20B14 PSR730Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. Kawai Rotary Poti vertikal Real Time Control Electrical properties:The nominal resistance is 10 kOhm. The original potentiometer from Kawai has a resistance value of 20 kOhm. Since this potentiometer is used as a voltage divider, the resistance value is not decisive.Appearance (technical characterisation):The casing measures 11 x 11 mm, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 10 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has no electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin. Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. Â
1 pcs. Slidepotentiometer suitable for The Dynacord PowerMate mixing console series is now manufactured in a version 3. This potentiometer fits securely into the original version of the PowerMate series.Dynacord PM600Dynacord PM1000Dynacord PM1600The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.Â
1 pcs. AKAI Stereo rotary potentiometer 14mm with threadAKAI MPC-2500  -  MAster Volume, Q3, Q4AKAI MPC-5000Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 7 mm lengt. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
1 pcs. E-Mu Emax Volume or Data Entry Slider 10K Ohmpractical advice:The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Kurzweil Replacement stereo rotary potentiometer for volume controlElectrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 17 mm, the total length without pins is 36,5 mm. In this total length the casing is 11 mm long. On this casing is the thread with 5 mm length connected. The axis has a diameter of 6 mm. It is made of Metall. The thread, which surrounds the axis, has the screw measure M7 x 0,75 mm.The six solder pins are 1 mm wide (one of them) and they are arranged in two rows in a distance of 5 mm (pitch).Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
Spare parts: Rotary and slider controls, potentiometers.
Rotary and slider controls are among the most commonly used control units on synthesizers, keyboards, organs, electric pianos, samplers, drm computers, and mixing consoles. If they are worn out, the device in which they were installed is often no longer fully usable.
In many cases, such devices end up in the closet, a few months later in the basement, years later, after moisture and dirt have attacked them, in the electronic scrap. This is usually completely unnecessary, because worn or damaged potentiometers can nowadays be replaced in most cases with relatively little effort and at low cost. Often it is only necessary to find the suitable spare part. Here Synth-parts.com is your competent partner and reliable helper. Especially in the case of components discontinued by the manufacturers, we are the help you need. In more than 10 cases we have even reissued controllers that are no longer available. For this purpose, we use the original manufacturers such as Alps, in order to guarantee exact component equality.
The exchange of potentiometers
The exchange of such a component requires of course experience in the handling of appropriate tools, i.e. a soldering iron, but can also be carried out by laymen. However, it must be taken into account that the device in question must often be almost completely disassembled and then reassembled. A camera or cell phone with photo function is an indispensable aid.
Repair in our specialized workshop
If you do not dare to repair the device yourself, or if you want to avoid the effort involved, we naturally offer you the repair in our well-equipped specialist workshop. With our special measuring devices and tools, our well-trained specialists can carry out such work properly and professionally at specially equipped workstations. You can send in your device after previous appointment arrangement, or deliver it directly. We will take care of the rest. Your favorite device is in the best hands with us.
Make an appointment to send in your device.