|To 3||4.81€ *|
|From 4||4.58€ *|
|From 8||4.35€ *|
Prices incl. VAT plus shipping costs
Ready to ship today, shipping: Mo,We,Fr.
Delivery time DE appr. 1-3 workdays.
Delivery time EU appr. 4-14 workdays.
Delivery time World appr. 6-30 workdays.
- Order number: VRRTA12CTM9F25B14M
Rotary Potentiometer vertikal 12 mm with center Tap
Substitute rotary potentiometer for
- Yamaha RS7000
Pitch Bend, ENV.DEPTH,SWING VELOCITY, CLOCK SHIFT MIDI DELAY, BEAT STRETCH GATE TIME
- Yamaha RM1x Utility
please refer to the separate note in the description!!!
The rotary pot fits also in
- Korg electribe EMX1
- Korg electribe ESX1
Pitch, Pan, Depth, EG Int, OSC Edit2
here the axis sticks out 2,5 mm.
In the RM1x, Yamaha has installed a potentiometer without a thread. The potentiometer with thread I offer here can also be used in the RM1x. For this, however, the drill holes must be drilled out 2 mm and the axis must be shortened by 5 mm. The great advantage of this solution is that I think potentiometers with threads will have much longer lifetime than potentiometers without threads. Indisputably, the axis is guided and stored much more stably by the thread.
n the pictures you see a test installation I have made.
The nominal resistance has 10 kOhm (Kilo-Ohm), the electric resistance gradient runs linear.
Appearance (technical characterisation):
The casing measures 12 mm bright, the total length without pins is 25 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.
The four solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function, in which the fourth pin has TAP function.
In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.
Between the two snap in holdings the distance is 13 mm. The holders latch in the board and fix the potentiometer mechanically.
The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
|Operating life:||15.000 cycles|