Potentiometer
1 pcs. Volume Slide potentiometer with 30mm travel. Suitable forYamaha EX5Yamaha Motif 6Yamaha Motif 7Yamaha Motif 8Yamaha QS-300Yamaha W5Yamaha W7------- Out of Production    --------Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 pcs. Slide potentiometer with 30mm travel. Suitable forYamaha SY77 - Data EntryYamaha SY99 - Data Entry This part is no longer availabel from Yamaha.This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 pcs. Slide potentiometer with 30mm travel. Suitable forYamaha Motif 6 - CS1 - CS4Yamaha Motif 7 - CS1 - CS4Yamaha Motif 8 - CS1 - CS4 This part is no longer availabel from Yamaha.This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 pcs. Volume Slide potentiometer with 30mm travel. Suitable forYamaha DX IIYamaha DX IIDYamaha DX IIFD-----    Discontinued - out of production   -------Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 pcs. Slide potentiometer with 30mm travel. Suitable forYamaha DX II - Data EntryYamaha DX IID - Data EntryYamaha DX IIFD - Data Entry This part is no longer availabel from Yamaha.This volume control with the labelling EWA-NFOC is no longer available from manufacturer Panasonic because the pot is not longer produced by them. We offer here a slide potentiometer with the same technical performance as the original part.Electrical properties:The stereo nominal resistance has 10 kOhm, the electric resistance gradient is logarithmic. The potentiometer is construed for a power of 0,06 Watt.Appearance (technical characterisation):This slide potentiometer has been built in in the past in many instruments and audio equipements. The particular embodiment of this potentiometer is the arrangement of the solder contact pins, which today are no longer usual. In total eight solder contact pins are laterally ordered to a group of four pins at the top and the end of the slide potentiometer. On both sides the solder pins are staggered in reverse order. Because of this arrangement the volume control fits only in a specific mounting position. The slide potentiometer has a travel of 30 mm.In medium range of the casing the metallic edge-socket connector is mounted. By these connectors the slide potentiometer will be fixed mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.
1 pcs. Slide potentiometer, suitable for E-mu E4KE-Mu E-SynthThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Slide Potentiometer with 60mm TravelThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Slide Potentiometer with 20mm TravelNote on the Lever:The lever on the original potentiometer is made of metal. The potentiometer offered here has a plastic lever that is 0.6 mm thicker than the original. The lever must be slightly worked in the thickness so that the cap can be attached.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Slide potentiometer with 30mm travel. Suitable for Casio FZ-1Specifications:Resistance: 10 kOhmtravel: 30 mmTechnical description:The potentiometer has a sliding path of 30 mm. Praktical tip:The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Yamaha Montage Scene Rotary PotentiometerYamaha Montage 6Yamaha Montage 7Yamaha Montage 8Yamaha YC73Yamaha YC88Electrical properties:The stereo nominal resistance has 5 Kilo-Ohm, the electric resistance gradient is liniear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The three solder pins are 0,6 mm wide (one of them) and they are arranged in one row in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The Potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
1 pcs. Rotary potentiometer for LCD Contrast adjustment  The potentiometer is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Slider with 45mm Travel and Center TAP Suitable for Yamaha S90ESThe slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Slider with 45mm Travel. Suitable for Kurzweil PC88The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Replacement stereo rotary potentiometer suitable for volume control inKorg Volca Sample 2Electrical properties:The stereo nominal resistance has 10 Kilo-Ohm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 10,5 x 11 mm, the total length without pins is 26,5 mm. In this total length the casing is 10 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 12,5 mm length. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of Metall. Its head has ends in corner radius. The thread, which surrounds the axis, has the screw measure M9 x 0,75 mm.The six solder pins are 0,6 mm wide (one of them) and they are arranged in two rows in a distance of 2,5 mm (pitch).At the end of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 10,5 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
1 pcs. Slider with 45mm Travel. Suitable for Yamaha Motif ES CS 1 - 4Yamaha Motif XS Volume 1 - 8The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Rotary Potentiometer vertikal 9 mm, 10kOhmSubstitute rotary potentiometer for KorgThe rotary pot fits also inKorg KorgElectrical properties:The nominal resistance has 10 kOhm, the electric resistance gradient runs linear. Appearance (technical characterisation):The casing measures 10 x 12 mm, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. The axis has a diameter of 6 mm and is flattened on a length of 12 mm. It is made of gray plastic. Its head has a slot and ends in corner radius. The three solder contact pins are 0,8 mm wide (one of them) and they are arranged in a raster in a distance of 2,5 mm. The bented pins, which are sticking out to the front, are necessary for the electrical function.In the back range of the casing the metallic edge-socket connector is mounted. The connector will be fixed at the printed circuit board by pressing in the snap in pin.Between the two snap in holdings the distance is 11 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.Â
1 pcs. Korg X2 Volume Slide PotentiometerKorg X2Korg X3Korg X5Korg X5DOEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Korg C15 Volume Slide PotentiometerKorg C15Korg C25Korg C35Korg C45OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. Korg i2 Volume Slide PotentiometerKorg i2Korg i3Korg i40Korg i50OEM Part: Original Equipment Manufacturer: We purchase this potentiometer from the same manufacturer as Korg did.The slider is firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.
1 pcs. SLIDE POT. BH10K OHM DX21Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. POTENTIOMETER (SLIDE TYPE) G100K C.C.Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. SLIDE POT. B10K RX-15Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. POTENTIOMETER A10K PSS-260Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. SLIDE POT. A10K RS30111A6 PSS170Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
Spare parts: Rotary and slider controls, potentiometers.
Rotary and slider controls are among the most commonly used control units on synthesizers, keyboards, organs, electric pianos, samplers, drm computers, and mixing consoles. If they are worn out, the device in which they were installed is often no longer fully usable.
In many cases, such devices end up in the closet, a few months later in the basement, years later, after moisture and dirt have attacked them, in the electronic scrap. This is usually completely unnecessary, because worn or damaged potentiometers can nowadays be replaced in most cases with relatively little effort and at low cost. Often it is only necessary to find the suitable spare part. Here Synth-parts.com is your competent partner and reliable helper. Especially in the case of components discontinued by the manufacturers, we are the help you need. In more than 10 cases we have even reissued controllers that are no longer available. For this purpose, we use the original manufacturers such as Alps, in order to guarantee exact component equality.
The exchange of potentiometers
The exchange of such a component requires of course experience in the handling of appropriate tools, i.e. a soldering iron, but can also be carried out by laymen. However, it must be taken into account that the device in question must often be almost completely disassembled and then reassembled. A camera or cell phone with photo function is an indispensable aid.
Repair in our specialized workshop
If you do not dare to repair the device yourself, or if you want to avoid the effort involved, we naturally offer you the repair in our well-equipped specialist workshop. With our special measuring devices and tools, our well-trained specialists can carry out such work properly and professionally at specially equipped workstations. You can send in your device after previous appointment arrangement, or deliver it directly. We will take care of the rest. Your favorite device is in the best hands with us.
Make an appointment to send in your device.