Display-Sets

1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha TG77We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:Inside Yamaha TG 77 is very little space for the new display. A circuit board is mounted behind the display, it is called switch panel. On this switch panel a number of diodes are soldered which can collide with the new display. It is highly advisable to move these diodes to the back of the switch panel.This work is to be done only by technically, best electrotechnically savvy people.

1 pcs. blue LCD Display with LED Backlight replacement including cable Kit forE-mu e5000 UltraWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color: White Character  /  blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The display is prepared by us ready to plug in. All adjustments to the technical features of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. Our recommendation is to remove this part of the circuitry. It is sufficient to remove one or two components with a side cutter.However, we would like to point out that there is very little space in most units. This work should only be done by technically experienced people.Installation service:We are also happy to install the display for you. Please ask. 

1 pcs. new LCD Display with LED Backlight replacement including cable Kit forKorg i2Korg i3We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play Display. No soldering is requiered.Color: Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people. 

1 pcs. LCD Display with LED Backlight replacement including cable Kit forKorg Wavestation,Korg Wacestation A/DKorg Wavestation EXWe offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  yellow BackgroundDelivery scope of LCD Display:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg Wavestation:The instrument must be disassembled almost completely to reach the display. Furthermore, you have to solder on wire bridge in your synthesizer. And you have to cut some elektronic parts to take out of control old Backligth section.This work is to be done only by technically, best electrotechnically savvy people.

1 pcs. OLED Display New forE-Mu Ultra ProteusTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display.These different Display versions are available:BlueRed/OrangeYellowWhiteLifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha QS-300 We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Pleaase let us know your instrument, so we can put on right cable length. Benefits for this Display Replacement with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation ths Display in Yamaha QS-300:The instrument must be disassembled almost completely to reach the display.  This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.

1 pcs. LCD Display with LED Backlight replacement including cable Kit forYamaha W5Yamaha W7 We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Pleaase let us know your instrument, so we can put on right cable length. Benefits for this Display Replacement with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation ths Display in Yamaha W5 or W7:The instrument must be disassembled almost completely to reach the display.  This is a very time-consuming process. Please do not underestimate the disassembly and assembly effort.This work is to be done only by technically, best electrotechnically savvy people.No soldering required.All you need is a screwdriver and a side cutter.

1 pcs. LCD display with LED backlightsuitable forRoland D-70, mainboard version 02Roland D-70, mainboard version 03We offer here a high quality replacement display with modern LED technology for the backlight.Color: black font/white backgroundScope of delivery of LCD Display set:Display with connection cableMounting accessoriesManual The delivery includes an already soldered cable and a connection adapter suitable for your mainboard.Please note the information at the end of the article description! Advantages of a display with LED backlight:much brighterhigh-frequency noise (beeping) of the transformer is eliminatedmuch longer lifetime of the backlight compared to the lifetime of EL-filmslower power consumptionNotes on assembly LCD Display for Roland D-70:The instrument must be almost completely disassembled to access the display.We strongly recommend to take the circuit part, which generates the backlight voltage for the old display, permanently out of operation.This procedure is described in the manual. This work should only be done by technically, preferably electrotechnically skilled people.CAUTION!Roland delivered the D-70 synthesizer with two revisions of the mainboard.In order to supply you with the correct version of the necessary connectors, it is important that you know the revision number of your mainboard before ordering this replacement display.Please order the version of our custom made, high quality replacement part that fits your D-70 synthesizer.This will save you from a possible wrong order.You will find the version designation in the upper left corner of your mainboard. Behind "ASSY 76237130" you will find either "01", "02" or "03". 

1 Stk. LCD display with LED backlightsuitable forRoland D-70, mainboard version 00Roland D-70, mainboard version 01We offer here a high quality replacement display with modern LED technology for the backlight.Color: black font/white backgroundScope of delivery:Display with connection cableMounting accessoriesManual The delivery includes an already soldered cable and a connection adapter suitable for your mainboard.Please note the information at the end of the article description!Advantages of a display with LED backlight:much brighterhigh-frequency noise (beeping) of the transformer is eliminatedmuch longer lifetime of the backlight compared to the lifetime of EL-filmslower power consumptionNotes on assembly:The instrument must be almost completely disassembled to access the display.We strongly recommend to take the circuit part, which generates the backlight voltage for the old display, permanently out of operation.This procedure is described in the manual. This work should only be done by technically, preferably electrotechnically skilled people.CAUTION!Roland delivered the D-70 synthesizer with two revisions of the mainboard.In order to supply you with the correct version of the necessary connectors, it is important that you know the revision number of your mainboard before ordering this replacement display.Please order the version of our custom made, high quality replacement part that fits your D-70 synthesizer.This will save you from a possible wrong order.You will find the version designation in the upper left corner of your mainboard. Behind "ASSY 76237130" you will find either "01", or "02". 

1 pcs. Roland GP-8 OLED Display New forThis Display replacement is a really easy swapping. No soldering is required.To be able to mount the new display, the mechanical fixation has to be changed. This can be done with light tools like a screwdriver and pliers.Please choose you favorit color. Lifetime:The lifetime is specified by the manufacturer with 40,000 to 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Roland D-110 OLED Display NewReady to plug in OLED display for replacement in Roland D-110 . No soldering is required.Roland has built a display into the D-110  that is no longer available today. Above all, a mechanical adaptation to today's available OLED display is required.We have developed a mounting frame that allows the use of today's standard display. We have this frame specially manufactured.For the actual assembly of the new OLED display in the Roland D110 only a screwdriver is required.Scope of delivery of the OLED Display Set:OLED Display ready wiredMounting FrameInstructionsPlease choose you favorit color. Lifetime of OLED Display:The lifetime is specified by the manufacturer with 40,000 to 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Roland PG-1000 OLED Display Red NEW, LCD ReplacementOLED display upgrade for the Roland PG-1000 programmer. This new OLED display upgrades the visual appearance of the Roland PG-1000 programmer. OLED displays convince with a very good readability from all viewing angles. Even in sunlight, OLED displays are easy to read.This OLED Display for Roland Programmer PG-1000 replacement is a really easy swapping. We will prepare this oled display in this way that you will only need a screwdriver. Cable connection is done into a socket.No soldering is required Notes on installation:- Recommendation: Take out of function the circuit part that generated the backlight voltage for the old display. It is sufficient to cut off two components with a small side cutter.- Instructions are enclosed with the display.Lifetime of OELD Display:The lifetime is specified by the manufacturer with 40,000 operating hours. Lifetime is different and depends on used color. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Black LCD Display with LED Backlight replacementYamaha S90We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for Yamaha S90:Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha S90:To replace the display in the Yamaha S90, remove the screws on the bottom edge. The S90 has a folding mechanism so that the upper part of the housing can be folded upwards. The display is then already accessible. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed.Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife.Mechanically, a piece of a small metal bracket must be sawn off. However, as this metal bracket can be easily removed from the appliance, this is a simple mechanical job.Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.   

1 pcs. White LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: Black Character  /  White BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards  the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.   

1 pcs. blue LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Blue BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards  the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.   

1 pcs. Yamaha SY35 OLED Display NEW yellow, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Roland JP8000 OLED Display brandnew in red this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Roland JP8000 OLED Display brandnew in green this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha VL1MWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha VL1m:No soldering is required. To replace the display in the Yamaha VL1m, the front panel must be largely dismantled. However, this is a relatively simple replacement. No soldering is required. The display is supplied pre-wired.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3K6Kurzweil PC3K7Kurzweil PC3K8We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast of the display can be adjusted as usual using the control in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3A6Kurzweil PC3A7Kurzweil PC3A8We offer an absolutely equivalent display using modern LED technology for backlight.Note on the PC3X series from Kurzweil:The replacement display offered here is the appropriate replacement for Kurzweil displays that already use LED backlighting. This can be identified by a short 2-pin connector to the right of the display. Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement  Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast and brightness of the display can be adjusted as usual using the controls in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Yamaha DX5 OLED Display NEW whiteReady-to-plug prepared OLED display for replacement in Yamaha DX5. The new OLED display is supplied by us with a new cable ready to plug in. Everything is screwed. No soldering required.Mechanical hints for the replacement of the OLED display in the Yamaha DX5:The mechanical effort required to remove the display from the instrument is relatively simple in this case. The cover of the synthesizer can be lifted up after loosening a few screws. Now the circuit board on which the display is mounted must be unscrewed. The display itself is screwed on and the cable is plugged in.Recommendation:Disconnect the circuitry that generated the backlight voltage for the old display. Simply cut off two components using small side cutters.Instructions are included with the display.Note on OLED technology:OLED - organic light-emitting diode. The advantage of OLED technology is that each pixel is illuminated. This makes the OLED display easy to read from all sides, even from extreme viewing angles. Furthermore, it is also very easy to read in sunlight.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

LCD Display for Roland Fantom XRThis part is no longer available from Roland

LCD Display forRoland Fantom X6Roland Fantom X7Roland Fantom X8