Display-Sets

1 pcs. Roland JP8000 OLED Display brandnew in red this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Roland JP8000 OLED Display brandnew in blue this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Roland JP8000 OLED Display brandnew in green this is  a plug in ready OLED Display replacement for Roland JP8000 Synthsizer. For this display replacement, we strongly recommend shortening the mounting bolts in the housing of the Roland JP8000. The OLED display itself is supplied pre-wired. No soldering is required Mounting instructions for Roland JP8000 OLED:The mechanical assembly of this OLED display is somewhat more complex. The synthesiser is opened from the back and almost all components have to be removed to access the display, unfortunately the keyboard also has to be removed.The display assembly:We have developed a special cable adapter for the display in the Roland JP8000. This makes it possible to continue using the flat cable used in the original. The flat cable is simply plugged in.The display in the Roland JP8000 is mounted on plastic bolts that are firmly connected to the display frame of the synthesiser, but these plastic bolts are much too high for the new OLED display at 8 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Roland JP8000 OLED Display:OLED display ready wiredInstallation instructionsmounting materialThe color of the shown display, may differ from the original.Installation service for Roland JP8000:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Black LCD Display with LED Backlight replacement including cable Kit forYamaha VL1MWe offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha VL1m:No soldering is required. To replace the display in the Yamaha VL1m, the front panel must be largely dismantled. However, this is a relatively simple replacement. No soldering is required. The display is supplied pre-wired.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forYamaha VL1MWe offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  White BackgroundDelivery scope of LCD Display Set:Display ready wiredMounting partsInstruction for replacementBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation for Display in Yamaha VL1m:No soldering is required. To replace the display in the Yamaha VL1m, the front panel must be largely dismantled. However, this is a relatively simple replacement. No soldering is required. The display is supplied pre-wired.This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3K6Kurzweil PC3K7Kurzweil PC3K8We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Black BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast of the display can be adjusted as usual using the control in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3A6Kurzweil PC3A7Kurzweil PC3A8We offer an absolutely equivalent display using modern LED technology for backlight.Note on the PC3X series from Kurzweil:The replacement display offered here is the appropriate replacement for Kurzweil displays that already use LED backlighting. This can be identified by a short 2-pin connector to the right of the display. Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement  Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast and brightness of the display can be adjusted as usual using the controls in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Black LCD Display with LED Backlight replacementYamaha EX5Yamaha EX7 We offer an absolutely equivalent display using LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for Yamaha EX5 :Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha EX5 :To replace the display, the Yamaha EX5 is opened from the back. So the rear half of the case has to be removed. Afterwards the DM board and a sheet metal frame must be unscrewed. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife. Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.   

1 pcs. Yamaha DX5 OLED Display NEW whiteReady-to-plug prepared OLED display for replacement in Yamaha DX5. The new OLED display is supplied by us with a new cable ready to plug in. Everything is screwed. No soldering required.Mechanical hints for the replacement of the OLED display in the Yamaha DX5:The mechanical effort required to remove the display from the instrument is relatively simple in this case. The cover of the synthesizer can be lifted up after loosening a few screws. Now the circuit board on which the display is mounted must be unscrewed. The display itself is screwed on and the cable is plugged in.Recommendation:Disconnect the circuitry that generated the backlight voltage for the old display. Simply cut off two components using small side cutters.Instructions are included with the display.Note on OLED technology:OLED - organic light-emitting diode. The advantage of OLED technology is that each pixel is illuminated. This makes the OLED display easy to read from all sides, even from extreme viewing angles. Furthermore, it is also very easy to read in sunlight.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

LCD Display for Roland Fantom XRThis part is no longer available from Roland

LCD Display forRoland Fantom X6Roland Fantom X7Roland Fantom X8

LCD Display forKorg Triton Studio

1 pcs. LCD Display forKorg Radias  - discontinued

1 pcs. LCD Display with LED Backlight replacement including cable Kit forKorg T1Korg T2Korg T3We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character  /  yellow BackgroundDelivery scope of LCD Display set:Display ready wiredMounting partsInstruction for replacementPlease let us know your instrument on order.The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation of LCD Display in Korg T1,T2,T3:The instrument must be disassembled almost completely to reach the display.Small soldering job: For the new display a jumper has to be soldered on the audio board.We recommend taking the power supply for the old display backlight out of operation. To do this, remove a transistor and a capacitor in the power supply. We have described this in our instructions.This work is to be done only by technically, best electrotechnically savvy people.

1 pcs. Brandnew OLED Display BLUE suitable forYamaha TX802Based on our practical experience, we can offer you a complete mounting kit that contains everything needed to mount the new display. You only need to open the case and replace the OLED display. All you need is a screwdriver. The cable is plugged. This will be delivered:1 Brand new high Quality OLED Display, ready wiredMounting materialsMounting Instructions These different Display versions are available:BlueGreenYellowWhite The color of the shown display, may differ from the original. Installation service:We are also happy to install the display for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 to 100,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. LCD Display brandnew in Blue forYamaha TX802This is  a plug in ready Display replacement for Yamaha TX802. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired.On TX802 there is no contrast adjustment possible. We can not guarantee a optimal View. The color of the shown display, may differ from the original. These different Display versions are available:BlackOrangeWhiteYellowInstallation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. Brandnew OLED Display GREEN suitable forYamaha TX802We have invested a few hours to customize this OLED display so that it can be used in the TX802. Based on our practical experience, we can offer you a complete mounting kit that contains everything needed to mount the new display. You only need to open the case and replace the OLED display. All you need is a screwdriver. The cable is plugged.  This will be delivered:1 Brand new high Quality OLED Display, ready wiredMounting materialsMounting Instructions These different Display versions are available:BlueGreenYellowWhite The color of the shown display, may differ from the original.Installation service:We are also happy to install the display for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 to 100,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. LCD Display yellow brandnew forYamaha TG55this is  a plug in ready Display replacement for Yamaha TG55 .We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. LCD Display black brandnew forYamaha TG55this is  a plug in ready Display replacement for Yamaha TG55 . You will only need a screwdriver for this replacement.We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. LCD Display yellow brandnew forYamaha TG55this is  a plug in ready Display replacement for Yamaha TG55 .We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueWhiteBlackYellowLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-SynthWe offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacementThe cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtion Notes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals. Installation service for LCD Display:We are also happy to install the display for you. Please ask. 

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forE-mu E4KE-mu E-Synth We offer an absolutely equivalent display using modern LED technology for backlight.The color of the shown display, may differ from the original.Color:  Black Character / yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement The cable must fit specifically to the instrument.Benefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes for installing the LCD display in the E-Synth:The display is prepared by us ready for plugging in. All adjustments to the technical specifications of the E-Mu sampler are made by us on the display. Plug and play installation. The new display is installed in exactly the same way as the old display was removed.Recommendation for backlight voltage: The original display required a separate voltage for the backlight. We recommend removing this part of the circuit. In this case, an SMD transistor must be desoldered.We would nevertheless like to point out that there is very little space in most devices. This work should only be carried out by technically experienced individuals.Installation service for LCD Display:We are also happy to install the display for you. Please ask.  

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forRoland DJ-70We offer an absolutely equivalent display using modern LED technology for backlight.Color: White Character  /  Blue BackgroundDelivery scope:DisplayMounting partsInstruction for replacementReady wired with original cableBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beepingis eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of  EL-Foillower power consumtionNotes on installation:The instrument must be disassembled almost completely to reach the display. We strongly recommend to disable electronic circuit that generates backlight voltage for old display. This is described in our manual. This work is to be done only by technically, best electrotechnically savvy people.  

1 pcs. LCD Display white brandnew forYamaha TG55this is  a plug in ready Display replacement for Yamaha TG55 .We deliver this LCD Display plug in ready.With this Display we deliver some Parts for easy mounting and a short Instruction Manual.These different Display versions are available:BlueYellowBlackWhiteLifetime:The backlight lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.