Displays und LED
1 pcs. OLED Display New forAlesis HR-16mechanical work is required on Alesis HR-16:The display is mounted on plastic bolts that are firmly connected to the housing. These plastic bolts must be shortened. The height of the OLED display is much lower than the height of the original LCD display. Without adjustment of the plastic bolts, a tunnel effect occurs because the new OLED display is much too deep in the housing.The screws from the original display can be reused.No soldering is required. The required plug is already soldered on and the cable is only plugged on.The color of the display shown may differ slightly from the original.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display brandnew in yellow forRoland JD-800this is a plug in ready Display replacement for Roland JD-800. You will only need a screwdriver for this replacement.We deliver this LCD Display ready wired. The color of the shown display, may differ from the original.Installation service:Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Roland PG-1000 OLED Display Blue NEW, LCD ReplacementOLED display upgrade for the Roland PG-1000 programmer. This new OLED display upgrades the visual appearance of the Roland PG-1000 programmer. OLED displays convince with a very good readability from all viewing angles. Even in sunlight, OLED displays are easy to read.This OLED Display for Roland Programmer PG-1000 replacement is a really easy swapping. We will prepare this oled display in this way that you will only need a screwdriver. Cable connection is done into a socket.No soldering is required Notes on installation:- Recommendation: Take out of function the circuit part that generated the backlight voltage for the old display. It is sufficient to cut off two components with a small side cutter.- Instructions are enclosed with the display.Lifetime of OELD Display:The lifetime is specified by the manufacturer with 40,000 operating hours. Lifetime is different and depends on used color. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Roland PG-1000 OLED Display Yellow NEW, LCD ReplacementOLED display upgrade for the Roland PG-1000 programmer. This new OLED display upgrades the visual appearance of the Roland PG-1000 programmer. OLED displays convince with a very good readability from all viewing angles. Even in sunlight, OLED displays are easy to read.This OLED Display for Roland Programmer PG-1000 replacement is a really easy swapping. We will prepare this oled display in this way that you will only need a screwdriver. Cable connection is done into a socket.No soldering is required Notes on installation:- Recommendation: Take out of function the circuit part that generated the backlight voltage for the old display. It is sufficient to cut off two components with a small side cutter.- Instructions are enclosed with the display.Lifetime of OELD Display:The lifetime is specified by the manufacturer with 40,000 operating hours. Lifetime is different and depends on used color. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Roland PG-1000 OLED Display green NEW, LCD ReplacementOLED display upgrade for the Roland PG-1000 programmer. This new OLED display upgrades the visual appearance of the Roland PG-1000 programmer. OLED displays convince with a very good readability from all viewing angles. Even in sunlight, OLED displays are easy to read.This OLED Display for Roland Programmer PG-1000 replacement is a really easy swapping. We will prepare this oled display in this way that you will only need a screwdriver. Cable connection is done into a socket.No soldering is required Notes on installation:- Recommendation: Take out of function the circuit part that generated the backlight voltage for the old display. It is sufficient to cut off two components with a small side cutter.- Instructions are enclosed with the display.Lifetime of OELD Display:The lifetime is specified by the manufacturer with 40,000 operating hours. Lifetime is different and depends on used color. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. LCD ASSEMBLY (B) CVP-605BSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.
1 pcs. Black LCD Display with LED Backlight replacementRoland MV-30We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character / Black BackgroundDelivery scope of LCD Display for MV-30:Display ready wiredInstruction for replacement Advantages of this LCD display compared to the original display from Roland:Modern LED technology for backlightVery good contrast ratioWe now have many years of experience with this type of LCD display. These displays are durable and robust.Notes on installation the Display in Roland MV-30 :To replace the display, the Roland MV-30 is opened from the back. So the rear of the case has to be removed. Afterwards the Mainboard and Analog Board must be unscrewed. There are a lot of cables to be unpluged, but it is alle pluged in sockets. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Please do not forget to clean the Display Beezel in the housing.No soldering required.All you need is a screwdriver and side cutters.
1 pcs. Yamaha SY35 OLED Display NEW white, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY22 OLED Display NEW white, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY22 OLED Display NEW green, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY22 OLED Display NEW red, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY22 OLED Display NEW yellow, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY22 OLED Display NEW blue, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY22. We have prepared the OLED display for the Yamaha SY22 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY35 OLED Display NEW green, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY35 OLED Display NEW red, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Yamaha SY35 OLED Display NEW blue, LCD ReplacementReady-to-plug-in OLED display for replacement in the Yamaha SY35. We have prepared the OLED display for the Yamaha SY35 ready for you to plug in.. You will only need a screwdriver.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Vintage KeysAll you need to replace this display is a screwdriver. We supply the display itself ready for installation. The appropriate cable is soldered to the OLED display by us. To replace the display in the E-Mu Vintage Keys, open the lid of the instrument. The front panel must then be removed. The OLED display can then be replaced. Lifetime:The lifetime is specified by the manufacturer with 40,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. OLED Display New forE-Mu Pro CussionTo replace this display you need very good knowledge in soldering. The original display is soldered firmly to the board via a pin header. To disassemble the old display, this pin header must be cleaned very cleanly from the solder.An installation manual is enclosed with the display. Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
1 pcs. Korg M1R OLED Display brandnew in yellow this is a plug in ready OLED Display replacement for Korg M1R Rack Synthsizer. You will only need a screwdriver for this replacement.We deliver this OLED Display ready wired.To install this OLED replacement display in the Korg M1R, first remove the housing cover of the synthesiser. The front panel is then removed. The display is now accessible and can be unscrewed. When mounting the new OLED display in the Korg M1, please use the spacer sleeves supplied.Not compatible with Korg M1 Keyboard version. This Display is a separate item.The color of the shown display, may differ from the original.Installation service for Korg M1R:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.
LCD or OLED replacement display for musical instruments
For each offered replacement LCD display, we have made a test installation on the respective keyboard instrument. We looked at the details of where there may be problems or difficulties when replacing the LCD or OLED displays. No matter if it needs adjustments on the electrical or on the mechanical side. We have analyzed this in detail and offer here the appropriate solution.
These findings we have implemented in our product replacement displays for electric pianos, synthesizers or keyboards. Every manufacturer of electronic keyboard instruments has something special to note for each series and display type. It does not matter if it's a Yamaha electric piano, a Roland keyboard or a Korg workstation. Also with synthesizers from Nord, Sequential Circuits or Casio.
Every exchange display, whether for Emu or Akai sampler, Technics E-Pianos, Kurzweil Synthesizer, or Kawai Keybords is prepared so far and ready with all the cables provided that your effort is as small as possible.
Every LCD or OLED display sold by us has been tested on a suitable keyboard instrument before shipping.
LCD or OLED
You don't know exactly to choose an LCD display or a modern OLED display?
A detailed article can be found in our Blog
LCD based displays are a well known and mature technology. The manufacturers have collected a lot of experience and there is little risk that the displays fail or not correspond to the lifetime information. A major disadvantage of LCDs are the quite narrow range in which the display can be read well.
Displays based on OLED are a fairly new technology. The basis of these displays are organic fluorescent substances. The main advantage of these OLEDs is the very good readability on two levels. On the one hand, these displays are easy to read even in sunlight and, secondly, the angle at which these displays are readable is very good. So even at a very steep angle from the side or from the top results in a very good readability of the display. A third advantage is the lower power consumption because no power is needed for a backlight.