Displays und LED

1 pcs. blue LCD Display with LED Backlight replacementYamaha RS7000We offer an absolutely equivalent display using modern LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Blue BackgroundDelivery scope of LCD Display for RS7000 :Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha RS7000 :To replace the display, the Yamaha RS7000 is opened from the back. So the rear half of the case has to be removed. Afterwards the floppy drive, the DM board and a sheet metal frame must be unscrewed. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife. Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters. 

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3A6Kurzweil PC3A7Kurzweil PC3A8We offer an absolutely equivalent display using modern LED technology for backlight.Note on the PC3X series from Kurzweil:The replacement display offered here is the appropriate replacement for Kurzweil displays that already use LED backlighting. This can be identified by a short 2-pin connector to the right of the display. Color: Black Character  /  White BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement  Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast and brightness of the display can be adjusted as usual using the controls in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3A6Kurzweil PC3A7Kurzweil PC3A8We offer an absolutely equivalent display using modern LED technology for backlight.Note on the PC3X series from Kurzweil:The replacement display offered here is the appropriate replacement for Kurzweil displays that already use LED backlighting. This can be identified by a short 2-pin connector to the right of the display. Color: Black Character  /  yellow BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement  Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast and brightness of the display can be adjusted as usual using the controls in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Black LCD Display with LED Backlight replacementYamaha EX5Yamaha EX7 We offer an absolutely equivalent display using LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for Yamaha EX5 :Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha EX5 :To replace the display, the Yamaha EX5 is opened from the back. So the rear half of the case has to be removed. Afterwards the DM board and a sheet metal frame must be unscrewed. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife. Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.   

1 pcs. Roland Juno 106 Display Bezel red newThis display bezel can replace the original display bezel on the Roland Juno-106. Due to the age of the Roland Juno-106 synthesiser, it is possible that the original bezel is scratched. It is also possible that the plastic has become brittle and must be replaced for this reason. Note on mounting the display bezel in the Roland Juno 106:It is best to use double-sided adhesive tape to stick the new display bezel in place. This adhesive tape can be purchased in suitable widths of e.g. 2 mm.

1 pcs LCD Display forYamaha CVP-309Yamaha Tyros 2

1 pcs. Roland Juno 106 Display Bezel clear newThis display bezel can replace the original display bezel on the Roland Juno-106. Due to the age of the Roland Juno-106 synthesiser, it is possible that the original bezel is scratched. It is also possible that the plastic has become brittle and must be replaced for this reason.Note on mounting the display bezel in the Roland Juno 106:It is best to use double-sided adhesive tape to stick the new display bezel in place. This adhesive tape can be purchased in suitable widths of e.g. 2 mm.

1 pcs. Korg PA5x LCD DisplayOriginal Display unti from Korg

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and white backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500  sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.The color of the shown display on picture, may differ from the original.Color: Black Character  /  white BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask. 

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with white letters and blue backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500  sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.Unfortunately, we cannot offer the complete instrument, but only a new LCD display.The color of the shown display on picture, may differ from the original.Color: White Character  /  blue BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and yellow-green backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.The color of the shown display on picture, may differ from the original.Color: Black Character  /  yellow BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the Stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

1 pcs. Yamaha DX5 OLED Display NEW yellowReady-to-plug prepared OLED display for replacement in Yamaha DX5. The new OLED display is supplied by us with a new cable ready to plug in. Everything is screwed. No soldering required.Mechanical hints for the replacement of the OLED display in the Yamaha DX5:The mechanical effort required to remove the display from the instrument is relatively simple in this case. The cover of the synthesizer can be lifted up after loosening a few screws. Now the circuit board on which the display is mounted must be unscrewed. The display itself is screwed on and the cable is plugged in.Recommendation:Disconnect the circuitry that generated the backlight voltage for the old display. Simply cut off two components using small side cutters.Instructions are included with the display.Note on OLED technology:OLED - organic light-emitting diode. The advantage of OLED technology is that each pixel is illuminated. This makes the OLED display easy to read from all sides, even from extreme viewing angles. Furthermore, it is also very easy to read in sunlight.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new white this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 Mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new yellow this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new blue this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new green this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha KX series OLED Display new red this is  a plug in ready OLED Display replacement for Yamaha KX-serie USB Keyboard. For this OELD display replacement, we strongly recommend shortening the mounting bolts in the housing of the Yamaha KX-25. The OLED display itself is supplied pre-wired. No soldering is requiredThis OLED Display can be used in:Yamaha KX25Yamaha KX49Yamaha KX61Yamaha KX8 mounting is differentMounting instructions for Yamaha KX series OLED:The mechanical assembly of this OLED display is somewhat more complex. The USB Keyboard is opened from the back and almost all components have to be removed to access the display,The display assembly: The display in the Yamaha KX is mounted on plastic bolts that are firmly connected to the housing of the Keyboard, but these plastic bolts are much too high for the new OLED display at 10 mm. It is best to shorten these bolts to 5 mm so that the new OLED display comes very close to the windscreen. These plastic bolts can be easily sawn off with a small modelling handsaw. In our picture it is a saw from Tamiya.The big advantage is that a shim can be placed underneath as a height stop. This allows me to saw off the correct height very safely.Scope of delivery Yamaha KX OLED Display:OLED display ready wiredInstallation instructions The color of the shown display, may differ from the original.Installation service for Yamaha KX series Keyboard:We are able to do this replacement for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 piece 7-Segment with 2 Digits, Redthis 7-segment with 2 digits fits perfect in these InstrumentsRoland Juno 106The Items are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

1 pcs. new Blue LCD Display with LED Backlight replacement forALESIS Andromeda A6We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character on Yellow BackgroundAttention: The colour of the display shown may differ slightly from the original, e.g. due to your screen settings.  Delivery scope:Display, prepared ready to plug inMounting partsBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beeping) is eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:This work should only be carried out by people who are technically, preferably electrotechnically, experienced.Installation service:We are also happy to install the display for you. Please ask.