Products

1 pcs. white LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and white backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500  sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.The color of the shown display on picture, may differ from the original.Color: Black Character  /  white BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask. 

1 pcs. black LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with white letters and blue backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.Display defective?Our display is also suitable as a replacement part if the original LCD display is defective. It doesn't matter if only the backlight is no longer working or if the LCD is without function. Our display is perfectly suitable as a replacement display for the AKAI MPC-2500  sampler.Or are you looking for a Christmas present?Are you looking for a gift for an ambitious musician who works a lot with AKAI samplers or who has always been annoyed by the original display? How about a new display that visually enhances the device and also increases the value of the instrument.Unfortunately, we cannot offer the complete instrument, but only a new LCD display.The color of the shown display on picture, may differ from the original.Color: White Character  /  blue BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

1 pcs. yellow LCD Display with LED Backlight replacement including cable Kit forAKAI MPC-2500 We offer an brand new display with LED technology for backlight. Display is ready mounted, no soldering is requiered.Display with black letters and yellow-green backlightDisplay design upgrade:AKAI has built in a display with a yellow-green backlight that breaks out of the housing and disturbs the elegant appearance of this instrument. We offer a new display that matches the black case of the AKAI MPC-2500 . The display fits harmoniously into the design of the sampler.The color of the shown display on picture, may differ from the original.Color: Black Character  /  yellow BackgroundDelivery scope:Display is ready wired on delkiveryMounting parts if necessaryNotes on installation:The display is prepared by us ready wired and no soldering is required. All adjustments to the technical features of the MPC sampler are made by us on the display. Plug and Play installation. The new display is installed in exactly the same way as the old display was removed. For this reason, we do not provide installation instructions here. Nevertheless, we would like to point out that there is very little space in most devices. This work should only be done by technically experienced people.When switching on the new display for the first time, the optimum contrast point must be adjusted. This is achieved by pressing and holding the Stop key and turning the data wheel.  Installation service:We are also happy to install the display for you. Please ask.  

1 pcs. AKAI Stereo rotary potentiometer 14mm with threadAKAI MPC-2500    -    MAster Volume, Q3, Q4AKAI MPC-5000Electrical properties:The stereo nominal resistance has 10 KOhm, the electric resistance gradient is linear. The potentiometer is construed for a power of 0,05 Watt.Appearance (technical characterisation):The casing measures 14 mm widht, the total length without pins is 20 mm. In this total length the casing is 7,5 mm long. On this casing is the thread with 5 mm length connected and out of the thread the axis rises with 7 mm lengt. The axis has a diameter of 6 mm and is flattened on a length of 7 mm. It is made of black plastic. Its head has a slot and ends in corner radius. The seven solder pins are 0,6 mm wide (one of them) and they are arranged in a distance of 2 mm (pitch). The curved pins, which are sticking out to the front, are necessary for the electrical function.In medium range of the casing the metallic snap in connector is mounted. These connector will fix the potentiometer at the printed circuit board by pressing in.Between the two snap in holdings the distance is 15,3 mm. The holders latch in the board and fix the potentiometer mechanically.Useful hint:The volume control is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it. 

1 pcs. Fatar Keyboard TP100 76 Tasten complete--- shipping only in germany, sorry  -----This Keyboard is for Nord models:Nord Stage 2 HP76Nord Stage 2EX HP76Nord Stage 3 HP76The replacement of the entire keyboard is from a certain age of the electric piano well worth considering. 

1 pcs. Yamaha DX5 OLED Display NEW yellowReady-to-plug prepared OLED display for replacement in Yamaha DX5. The new OLED display is supplied by us with a new cable ready to plug in. Everything is screwed. No soldering required.Mechanical hints for the replacement of the OLED display in the Yamaha DX5:The mechanical effort required to remove the display from the instrument is relatively simple in this case. The cover of the synthesizer can be lifted up after loosening a few screws. Now the circuit board on which the display is mounted must be unscrewed. The display itself is screwed on and the cable is plugged in.Recommendation:Disconnect the circuitry that generated the backlight voltage for the old display. Simply cut off two components using small side cutters.Instructions are included with the display.Note on OLED technology:OLED - organic light-emitting diode. The advantage of OLED technology is that each pixel is illuminated. This makes the OLED display easy to read from all sides, even from extreme viewing angles. Furthermore, it is also very easy to read in sunlight.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 piece Electrolytical Capacitor 1uF/50VManufakturer: Rubycon  Electrolytic capacitors are subject to natural aging. This aging is specified as the service life for each electrolytic capacitor and depends on the internal temperature of the capacitor.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 piece Tantal Capacitor 10uF/16V Radial Be sure to check the polarity of tantalum capacitors. Incorrect polarity will destroy the capacitor.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5069used by:KorgRolandYamaha These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. Fatar Keyboard TP100 76 Tasten complete--- shipping only in germany, sorry  -----This Keyboard is for Nord models:Nord Stage 2 HP76Nord Stage 2EX HP76Nord Stage 3 HP76The replacement of the entire keyboard is from a certain age of the electric piano well worth considering. 

1 pcs. Transformer Yamaha CVP-50 XG038A00This Transformer is usedd and in a good condition.The primary cause of a defective, e.g. To make matters worse, most devices are only protected on the primary side of the transformer with a microfuse. In this situation, the transformer operates in overload, which in turn leads to overheating of the transformer. 

 1 pcs. PP Capacitor 3.3 nF Safety Y2 - 10 mmSafety film capacitor suitable for use in mains filters 

1 pcs. Yamaha USB Socket Typ B PCB with mounting These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Price is for 1 piece.

1 pcs. Yamaha Tyros 5 FFC cable LCL-LCR ConnecthThis cable connects the control buttons next to the LCD display to the large control panel on the left. This cable is often moved when the display is repositioned.   

1 pcs. Yamaha pedal felt red for E-PianoThis felt lines the inside of the pedal box and guides the pedalThe felt is coated with adhesive film on one side. 

1 pcs.Kawai Speaker KS05-013 TweeterNEWsuitable forKawai CA-901

1 piece Electrolytical Capacitor 6800uF/25VManufakturer: NichiconSeries: LGY - Snap InHere i offer spezial Capacitor from manufakturer Nichicon. The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. Yamaha pedal black red for E-PianoThis felt lines the inside of the pedal box and guides the pedalThe felt bust be glued. This felt is without adhesive. 

1 pcs 65W internal Switching Power Supply Unit suitable forKorg PA-800Electrical properties:Primary input voltage: 90 - 264 VACRated Power: 65 WattEfficiency: 77%Ripple: 1%Tripple OutputShort circuit protectionEN6100 proofEMC: CLASS BPractical advice:Plug of the device. Don't work under Voltage.  

1 piece Nichicon Electrolytic Capacitor 270uF/6.3V Polymer SMDManufacturer: NichiconHere i offer spezial Capacitor from manufakturer Nichicon.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. Siemens SM304A Parallel/Serial converterThis is the genuine Siemens chip SM304A Parallel/Serial converter for Keyboards. This chip is used, TESTED and FULLY WORKING conditions. This chip it was used in KORG BX3 and CX3.Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs. Battery 3 Volt - 1/3N   3 Solder pinPlease check right polarity! Attention: Shipping for Europe only The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs.Yamaha CP88 Knob S Indicator Praktical tip:The knobs are just plugged on. No tools are needed.

1 pcs. FFC Kabel 20 Pol 1,25 Pitch L300Keyboard connection cableBoth ends same side connector