Products

1 piece bipolar Elko 22uF/50V for Audio circuitsManufakturer: NichiconIn E-Pianos, Synthesizern and Keyboards bipolar electolytical capacitors are used for audio signal decoupling in Audio signal path. After 20 years these capacitors  are aged. In much cases the messured capacity after 20 years of use is 20 % distant from par value.Here i offer spezial bipolar Elkos from manufakturer Nichicon. The series Muse ES is developt spezial for use in audio signals path.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. 

1 pcs. Modal Synthesizer Encoder Typ12 20D no click with switchPractical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Modal Synthesizer Encoder with clicks with switchPractical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Modal Synthesizer Encoder no Click no switchPractical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Modal Sysnthesizer tactile switch The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton

1 pcs. Housing JST XH - 8 Pol Technical hint:These part is only housing without electrical contacts. For these contacts you will need a special Crimp tool.

1 pcs. Yamaha S90ES KNOB S, ENCODER Data Dial

1 pcs. Yamaha Tyros 4/5 SLIDER KNOB used at SONG, ASSIGN, 1−8

1 pcs. Phone Jack 1/8 inch - 3.5 mm, stereo witch switch, printed circuit for Korg, Roland or Yamaha InstrumentsJalco phone jack YKB21-5352This phonejack is a stereo jack socket with 7 solder legs. In addition to the signal contacts for stereo signal transmission, this jack has 2 switching contacts that are designed as normally closed contacts. These jack sockets are basically downwards compatible. For example, this 7-pin socket can also be used for the 3-pin version. To do this, it is sufficient to cut the extra soldering legs.Furthermore, there are two plastic noses on the underside, which are intended as a guide and holding tiller. These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Varta CR2450 with 3 solder pinAttention: Shipping for Europe only Technical Description:The dimensions of CR2450 are diameter of 24 mm and a thickness of 5 mm. Due to the soldering legs, the installation height is 10 mm for this horizontal version. The positive pole owns two interconnected soldering legs at a distance of 10 mm. The negative pole has one solder leg.Practical tip:The batterie is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Information for handling old Battery's

1 pcs. Felt for Keyboard 3.5mm*6mm 1250 lenghtThe key felt on many digital pianos, keyboards and synthesisers has started to show its age. As a result, the keyboard can become very noisy when played.This felt is relatively soft. Because of this softness, the felt compresses easily, meaning that its effective thickness under load is considerably less than the stated 3.5 mm. This softness provides very good cushioning.Fitting a new felt pad will solve this problem. A simple but effective solution.We have had this felt pad specially made by a company that specialises in the manufacture and processing of a wide variety of felts. You will receive a high-quality piano felt pad of the very best standard. Made in Germany. You will need one for a complete Keyboard with 88 keys.One-sided self-adhering 

1 piece 7-Segment with 2 Digits, Redthis 7-segment with 2 digits fits perfect in these InstrumentsRoland Juno 106The Items are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required.

1 pcs. Diode Keyboard Matrix Kawai 

1 pcs. new Blue LCD Display with LED Backlight replacement forALESIS Andromeda A6We offer an absolutely equivalent display using modern LED technology for backlight.Color: Black Character on Yellow BackgroundAttention: The colour of the display shown may differ slightly from the original, e.g. due to your screen settings.  Delivery scope:Display, prepared ready to plug inMounting partsBenefits for this Display with LED Backlight:much brighterhigh-frequency noise (beeping) is eliminatedlifetime of LED Backlight is around 3 times higher than lifetime of EL-Foillower power consumtionNotes on installation:This work should only be carried out by people who are technically, preferably electrotechnically, experienced.Installation service:We are also happy to install the display for you. Please ask.

1 pcs. Battery 1/2 AA suitable for   Attention: Shipping for Europe onlyInformation for handling old Battery's

1 pcs. triple MIDI DIN socket female 5 pin for printed circuitJalco YKF51-5046 Please look carefully. This MIDI socket is also available in a version in which the DIN sockets are rotated by 180 degrees.used by: Kawai  These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. Encoder with short axis suitable for modelsAkai MPC-2000XLPractical advice:These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.

1 pcs. tactile switch suitable for modelsAkai MPC-3000Akai Part Number:  ES-410552The buttons are firmly soldered to a circuit board. For replacing the button craftsmanship and experience in soldering is required.why should I solder new pushbutton