Products

1 pcs. Brandnew OLED Display GREEN suitable forYamaha TX802We have invested a few hours to customize this OLED display so that it can be used in the TX802. Based on our practical experience, we can offer you a complete mounting kit that contains everything needed to mount the new display. You only need to open the case and replace the OLED display. All you need is a screwdriver. The cable is plugged.  This will be delivered:1 Brand new high Quality OLED Display, ready wiredMounting materialsMounting Instructions These different Display versions are available:BlueGreenYellowWhite The color of the shown display, may differ from the original.Installation service:We are also happy to install the display for you. Please ask.Lifetime:The lifetime is specified by the manufacturer with 50,000 to 100,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity.

Knob for rotary potentiometers inRoland Fantom FARoland Fantom SRoland Fantom X6Roland Fantom X7Roland Fantom X8Roland Fantom XaSpecifications:Diameter top:       10.4 mmDiameter bottom: 17.8 mmHight:   17.2 mmShaft:   6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.

Dual Button for 12 x 5 mm (No Window)Roland U-20Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 12 x 5 mm. This part has two Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Dual Button for 17 x 5 mm (No Window)Roland FP-8Roland U-20Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has two Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button for 17 x 5 mm (No Window)Roland U-20Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button 17 x 7 mm (No Window)Korg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button 17 x 7 mm with WindowKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button 19 x 7 mm (No Window)Korg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button 19 x 7 mm with WindowKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

Single Button RED 19 x 7 mm with WindowKorg Pa1XKorg Pa1X ProKorg Pa2XKorg Pa2X ProKorg Pa800Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future. No longer suitable!!!! Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 19 x 7 mm. This part has one Button.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

1 pcs. Fader knob suitable for:Korg Oasys Out of Production -  this part is no longer suitable from Korg.   

1 pcs. Knob for power switch inRoland Fantom XRSpecifications:Dimension: 18x18 mmHight:  10 mmTechnical description:Praktical tip:The knobs are just plugged on. No tools are needed.Price is for one Knob without switch

Cap quadratic for power switch suitable in Technics E-PianosTechnics PX101Technics PX103Technics PX107Technics PX111

1 pcs. Fader knob suitable for:Korg Pa500no longer supported from Korg. 

1 pcs. Fader knob suitable for:KORG SP250No longer suitable from Korg 

1 pcs. Fader knob suitable for:Roland U20

1 pcs Dial Knob suitable forTechnics KN6000

1 pcs. Cap rectangular for power switchPlease note the dimensions. The original caps used to be larger on many instruments. 

Knob for rotary potentiometers inRolland Fantom G6Roland Fantom G7Roland Fantom G8Specifications:Diameter top:       10.4 mmDiameter bottom: 17.8 mmHight:   17.2 mmShaft:   6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.

1 pcs. Dual Button for 17 x 5 mm with WindowRoland FP-8Do you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Roland Instruments and is build for a Casing Window of 17 x 5 mm. This part has two Buttons.Practical tip:This button sits between PCB and Cassis. In munch cases the button is fixed with tape. Other Manufacturer fix this parts with adhesive.

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with white line

1 pcs. Fader knob suitable for:Technics E-PianoColor: Blach with brown line

1 pcs. Button 6x small forTechnics E-PianoDo you know this: the button you activate don't react. This processs starts slowly and in the beginning do don't recognice it. Later you start to activate the buttons harder and harder. Then, one day the button will broke. The reason for this is a worn out tact switch under the user button. When you replace the tact switch all will be fine in future.Technical Description:This Button fits for many Technics Instruments and is build for a Casing Window of 10 x 10 mm. This part has six Buttons.Practical tip:This button sits between PCB and Cassis.

1 pcs. Knob for rotary potentiometers inKorg KROMESpecifications:Diameter top:        9 mmDiameter bottom: 10 mmHight:   14 mmShaft:   6 mm, flattedPraktical tip:The knobs are just plugged on. No tools are needed.