Products

1 pcs. Blue LCD Display with LED Backlight replacement including cable Kit forKurzweil PC3A6Kurzweil PC3A7Kurzweil PC3A8We offer an absolutely equivalent display using modern LED technology for backlight.Note on the PC3X series from Kurzweil:The replacement display offered here is the appropriate replacement for Kurzweil displays that already use LED backlighting. This can be identified by a short 2-pin connector to the right of the display. Color: White Character  /  Blue BackgroundDelivery scope:Display ready wiredMounting partsInstruction for replacement  Notes on installation The LCD Display in Kurzweil PC3XThe original Kurzweil display has different dimensions to today's commercially available displays. We have therefore developed an adapter board to adapt this. We supply the display pre-wired and pre-assembled.This work is to be done only by technically, best electrotechnically savvy people.The contrast and brightness of the display can be adjusted as usual using the controls in the instrument.No soldering required.All you need is a screwdriver and a side cutter. 

1 pcs. Black LCD Display with LED Backlight replacementYamaha EX5Yamaha EX7 We offer an absolutely equivalent display using LED technology for backlight.Plug and Play. No soldering is required.Color: White Character  /  Black BackgroundDelivery scope of LCD Display for Yamaha EX5 :Display ready wiredInstruction for replacement Advantages of this special LCD display compared to the original display from Yamaha:The original Yamaha display consists of two individual components. Once the LCD display and a separate component, the backlight. The backlight is no longer available from Yamaha as a spare part. In the LCD display we offer here, the backlight is integrated. Originally two components become one component.We now have many years of experience with this type of LCD display. These displays are durable and robust. Notes on installation the Display in Yamaha EX5 :To replace the display, the Yamaha EX5 is opened from the back. So the rear half of the case has to be removed. Afterwards the DM board and a sheet metal frame must be unscrewed. Everything is scraped and only a Phillips screwdriver, preferably PH2 is needed. Now the old display can be removed. Before installing the new display, three plastic lugs must be removed in the display frame. These can be broken off with pliers, or cut off with a knife. Please do not forget to clean the washer in the housing.No soldering required.All you need is a screwdriver, flat nose pliers and side cutters.   

1 pcs. Kawai NV5 Pedal Potentiometer with cableThis is a replacement Poterntiomter for Damper Pedal from E-Piano.Electrical properties:The nominal resistance has 10 kOhm.Appearance (technical characterisation):This Potenziometer is a very spezial part. This one will only fit for Pedal.Useful hint:The potentiometer is soldered on the circuit board. You should have mechanical skills and experience in soldering to replace it.  

Key's 16N unweighted suitable for Yamaha This keyboard is used in these modells:Yamaha PSR-e403Color: whiteThis key is newmechanical construction:Keys for this Keyboard are not available as single keys. One Octave will be a set of three single spare parts. One part for the black Keys. One part for D/A/F, and one part for C/E/F/B.

1 pcs. Yamaha Disklavier DRIVE B Circuit Board XL114D0  -- Discontinued -- Semiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

Replacement Keys for Technics SK25 KeyboardSK25 keyboard is used in Technics PR-603Technics PR-703 Color: pur whiteThe SK25 keyboard is a touch-sensitive keyboard with 4-zone hammer mechanics.The unweighted keys have a length of 21.4 cm with a width of 2.24 cm. The depth of the key is 5.7 cm measured from the top of the key to the lower end of the key stroke. The top dead center stop is realized by a hook at the lower end of the key. The contactor, which presses on the contact strip, is not formed on the keyboard but on the hammer. At the back end, the key is held in the keyboard frame by means of a slot. The black keys have a length of 16.4 cm with a width of 1.2 cm. 4-Zone Hammer Mechanics:A 4-zone hammer mechanism is now state of the art for high-quality e-piano keyboards. By means of the four different zones the keyboard manufacturers try to get closer to the feeling of a mechanical wing. The keystroke on a mechanical piano varies depending on the area, whether bass or high. This is simulated with this keyboard by the fact that there are four different hammers with different weight. mechanical construction:The base of the keyboard is made of steel sheet and is very stable and rigid. All other components are attached to this frame by screwing or clamping. Particular mention should be made of the structure of the hammers. The hammers used here are made of a continuous metal part, which should guarantee a long life for these hammers. Only the attached plastic parts appear quite graceful.

 1 pcs. PP Capacitor 100 nF X2 Safety

1 piece Electrolytical Capacitor 56uF/400V for Switching Power SupplyManufakturer: Nichicon Here i offer spezial Capacitor from manufakturer Nichicon.The capacitors are firmly soldered to a circuit board. For replacing  craftsmanship and experience in soldering is required. ""

1 pcs. PCB Set for Korg ARP Odysseincluding: KLM-3304,-3005,-3006,-3007,-3008,-3009

1 pcs. Encoder 11 mm footprint and extra short axis Practical advice: These encoder is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

1 pcs. Yamaha RCA stereo jack YKC21-3120 These phone jack is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required. 

Yamaha 14Y replacement keys  mechanical construction:The keys for this keyboard are not available individually. Only one octave with 12 keys or the end octave with 13 keys is available. 

Fatar replacement keys for the TP40/W keyboard (used)The Fatar TP/40 Wood (TP40/W) is a special version of the TP/40 family with a wooden core in the white keys and an “ivory feel” surface finish, which is used in high-quality musical instruments. It is used, for example, in Studiologic devices and is also installed in the expensive master keyboard from the Austrian keyboard manufacturer Lachnit. In addition, the TP/40 Wood is used in instruments that are mainly digital pianos, such as the Nord Piano. The TP/40 Wood belongs to the TP/40 family and is therefore interchangeable with other keyboards in this family by means of screws and plugs, provided that the diode polarity “DF” (common anode) is observed.

1 pcs. Alfa Rpar AS3340A VCO IC DIP16 replaecemt for Curtis CEM3340The IC Alfa Rpar AS3340A is a voltage-controlled oszillator module that was used in analogue synthesizers in the 1980s. Mechanical Description of AS3340A:This AS3340A is housed in a DIP 16 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The IC has 2 x 8 connecting pins with grid of 2.54 mm x 7.62 mm. Benefits of advanced chip typ:AS3340A are improved versions of AS3340. AS3340A and have much more output frequency stability against Vcc and VEE . Frequency stability can be improved If external reference voltage (with level approximately 1/3 Vcc) is connected to pin 9 (Soft Sync. Input). AS3340A benefits from improved symmetry of rising and falling edge of triangle signal (approx.. 50%).AS3345 benefits from additional Meander Output. Meander edge starts when Triangle changes it’s direction. These feature gives additional opportunities for design.Technical description of the AS3340A:The AS 3340 is a completely self contained, precision voltage controlled oscillator, featuring both exponential and linear control scales and up to four buffered output waveforms: triangle, sawtooth, square, and pulse with voltage controllable pulse width. Full temperature compensation makes these VCOs extremely stable, and eliminates the need for a temperature compensation resistor. The highly accurate exponential and linear control inputs are virtual ground summing nodes, allowing multiple control voltages to be mixed within the device itself.Practical tips:These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Please be carefull because of static charing 

1 pcs. Alfa Rpar AS3320 VCF IC DIP18 replacement for Curtis CEM3320The IC Alfa Rpar AS3320 is a voltage-controlled filter module that was used in analogue synthesizers in the 1980s. The AS3320 is pin-compatible with the Curtis CEM3320 Mechanical Description of AS3320 :This AS3320 is housed in a DIP 18 package and is designed for  classic through hole mounting on a circuit board. Use of a socket is possible. The IC has 2 x 9 connecting pins with grid of 2.54 mm x 7.62 mm.Technical description of the AS3320 :The AS3320 is a high performance voltage controlled four-pole filter with on-chip voltage controllable resonance IC. The four independent sections may be interconnected to provide a wide variety of filter responses, such as low pass, high pass, band pass and all pass. A single input exponentially controls the frequency over greater than a ten octave range with little control voltage feedthrough. Another input controls the resonance in a modified linear manner from zero to low distortion oscillation. For those demanding applications, provision has been made to allow trimming for improved control voltage rejection. Each filter section features a variable gain cell which is fully temperature compensated, exhibits a better signal-to-noise ratio and generates its low distortion predominantly in the second harmonic. The device includes a minus two volt regulator to ensure low power dissipation and consequent low warm-up drift.Technically, the IC may differ slightly from the original. When replacing a Curtis CEM3320, the entire instrument must be recalibrated.The CEM3320 was used in Oberheim and Sequential Circuits Synthesizern..Practical tips:These part is firmly soldered to a circuit board. For replacing craftsmanship and experience in soldering is required.Please be carefull because of static charing 

1 pcs. Power cabel 2m with 2P plug for Yamaha  InstrumentsVDE testedCable: H05VV-F2G0,75mm²Socket: C10Mains plug CEE 7/7 earth contactLength: 2 m  

1 pcs. Yamaha MKH contact PCB FSX76 D2I+ KeyboardThis PCB is for high part in Keyboard 

1 pcs. Yamaha MKH contact PCB FSX76 D2I+ KeyboardThis PCB is for lower Keyboard part. 

1 pcs. Yamaha MKC contact PCB FSX76 D2I+ KeyboardThis PCB is for center Keyboard part. 

1 pcs. new Korg RH-4L PCB Assy KeyboardRH-4, RH-4L or RH-4HL—one letter—big difference. Please note.this is set of three contact PCB as used in Korg RH-4L.This set contains LOW, MID ans HIGH contact PCB  - KLM 3587/88/89, 510d929735The circuit board is partially supplied with a blue protective film over the contacts. This protective film must be removed before installation. 

1 pcs Yamaha CP4,CP40 GHD connection cable 7 pol for KeyboardThis Cable connects keysboard an Mainboard in your Instrument. Please note: This cable will most likely be available in many different lengths!!!!  

1 pcs. Yamaha DX5 OLED Display NEW whiteReady-to-plug prepared OLED display for replacement in Yamaha DX5. The new OLED display is supplied by us with a new cable ready to plug in. Everything is screwed. No soldering required.Mechanical hints for the replacement of the OLED display in the Yamaha DX5:The mechanical effort required to remove the display from the instrument is relatively simple in this case. The cover of the synthesizer can be lifted up after loosening a few screws. Now the circuit board on which the display is mounted must be unscrewed. The display itself is screwed on and the cable is plugged in.Recommendation:Disconnect the circuitry that generated the backlight voltage for the old display. Simply cut off two components using small side cutters.Instructions are included with the display.Note on OLED technology:OLED - organic light-emitting diode. The advantage of OLED technology is that each pixel is illuminated. This makes the OLED display easy to read from all sides, even from extreme viewing angles. Furthermore, it is also very easy to read in sunlight.Lifetime of OLED Display:The lifetime is specified by the manufacturer with 50,000 operating hours. After this specified drive time, the display still has 50% of its original luminosity. 

1 pcs. Yamaha TYROS 5 LCL CIRCUIT BOARDSemiconductors and electronic assemblies are sensitive to electrostatic charge. Please observe the regulations on ESD handling.The exchange and return of semiconductors and electronic assemblies is excluded after opening the packaging.

1 pcs 65W internal Switching Power Supply Unit brand new, suitable forAKAI MPC-2000Description:This switching power supply is a perfect replacement for some AKAI Sampler. In some devices AKAI has used the same power supply unit.Our brand new replacement switching power supply has exactly the same mechanical dimensions and the same connectors as the original power supply. Plug and Play.63 Watt power upgrade: The original AKAI power supply has an output of 43 Watt. If extensions such as additional memory or additional drives are installed, the original power supply unit will not be able to supply this power. This is where a power supply upgrade comes in handy. Electrical properties:Primary input voltage: 90 - 264 VACRated Power: 63 WattEfficiency: 77%Ripple: 1%Tripple OutputShort circuit protectionEN6100 proofEMC: CLASS BPractical advice:Plug of the device. Don't work under Voltage.Make absolutely sure that the connection cables to the power supply have no contact with the cooling element of the power supply. Due to the development of heat, the insulation of the cable can melt and cause a short circuit or worse tripping.